Hikrobot MV-CH250-90XM-C-NN

Selection context and use cases

Passive monochrome CoaXPress imaging at 41.5 fps is the role of MV-CH250-90XM-C-NN. Its Gpixel GMAX0505 CMOS sensor captures 5120 × 5120 Mono 8 frames with a global shutter and 2.5 µm pixels. The camera combines a DIN data interface, C-mount optics, and a 50 mm × 50 mm × 45 mm enclosure without a fan or heat sink.

The monochrome stream supports contour measurement, fine surface checks, and registration analysis on moving parts. A 13 μs minimum exposure and simultaneous shutter can be paired with controlled illumination to limit motion blur. CXP-1 supports PoCXP, while an external 9–24 V DC input remains available; the 12-pin P10 connection also exposes isolated input, isolated output, bidirectional I/O, and RS-232.

MV-CH250-90XC-C-NN shares 41.5 fps, DIN CoaXPress, C-mount, and the passive body but provides Bayer BG 8 color and UltraShort exposure down to 3 μs. MV-CH250-90Y1M-NN runs at 41.3 fps over Micro-BNC in a 29 mm × 29 mm × 42 mm enclosure. MV-CH250-90Y2M-C-NF increases monochrome speed to 85 fps with Micro-BNC and fan cooling.

Documents

Selection and applications

Monochrome contour measurement. Fine surface-defect inspection. Moving registration mark capture.

Minimum kit: Combine the camera with a C-mount lens for the 1.1-inch sensor, a DIN CoaXPress cable and host interface, and PoCXP on CXP-1 or a 9–24 V DC supply.

Nearby in the range: MV-CH250-90XC-C-NN — Prefer it for Bayer BG 8 color at the same 41.5 fps DIN CoaXPress rate; MV-CH250-90Y1M-NN — Prefer it for a 41.3 fps Micro-BNC connection in a 29 mm × 29 mm body; MV-CH250-90Y2M-C-NF — Prefer it when monochrome CoaXPress capture needs an 85 fps full-frame rate.

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables

CoaXPress

I/O & power cables

12-pin IO

Power

Power

Mounting

Camera mounts

All accessory families →

FAQ

What monochrome stream does MV-CH250-90XM-C-NN produce?

The camera sends 5120 × 5120 Mono 8 frames at up to 41.5 fps. Capture uses the 26.2 MP Gpixel GMAX0505 with 2.5 µm pixels and a global shutter, providing dense monochrome data with simultaneous exposure.

What is the exposure interval on this DIN CoaXPress model?

Exposure can be set from 13 μs to 10 sec. The global shutter applies that interval across the complete frame, supporting measurement of moving or indexed features when the short end is paired with adequate illumination.

How can electrical power be supplied to MV-CH250-90XM-C-NN?

CXP-1 supports PoCXP through the CoaXPress path. The alternative is an external supply from 9 V DC to 24 V DC. Typical consumption is 7.0 W at 12 V DC, which should be included in the camera-side power allocation.

What control signals are available beside the image link?

The 12-pin P10 connector provides one opto-isolated input, one opto-isolated output, one bidirectional non-isolated I/O line, and one RS-232 channel. These connections support external trigger and status integration.

How does passive cooling affect the camera package?

MV-CH250-90XM-C-NN is listed without a fan or heat sink. The IP40 body measures 50 mm × 50 mm × 45 mm and weighs about 207 g. Its specified operating interval is 0 °C to 50 °C with non-condensing humidity.