Area camera · CH Series
Hikrobot MV-CH250-90Y2M-C-NF
- Lead time
- from 5 days
- Warranty
- 36 months
Where this model fits
Eighty-five full 26.2 MP frames per second place MV-CH250-90Y2M-C-NF between the 41.3 fps and 150 fps CoaXPress groups. The global-shutter Gpixel GMAX0505 supplies 5120 × 5120 Mono 8 through a Micro-BNC interface. A C-mount fronts the 1.1-inch sensor, and fan cooling is integrated into the 40 mm × 40 mm × 66.5 mm body.
The rate supports repeated contour, position, and surface measurements on fast-moving components. UltraShort exposure from 4 μs to 12 μs can be synchronized with a strobe, while standard exposure continues from 13 μs to 10 sec. CXP-0 supports PoCXP, and a 6-pin P7 connector supplies isolated input, isolated output, and a bidirectional line for external triggering and status.
MV-CH250-90Y1M-NN is the compact passive choice at 41.3 fps, keeping Mono 8, C-mount, and Micro-BNC. MV-CH250-90XM-C-NN provides 41.5 fps monochrome through a DIN CoaXPress connection. MV-CH250-90YM-C-NN V2.0 increases full-frame speed to 150 fps in a 60 mm × 60 mm × 59 mm passive C-mount enclosure.
Specifications
| Shutter | global |
| Sensor model | Gpixel GMAX0505 |
| Nominal optical sensor format | 1.1″ |
| Sensor resolution | 5120×5120 px |
| Maximum frame rate | 85 fps @ Mono8, resolution 5120×5120 px |
| Color mode | mono |
| Lens mount | C-mount |
| Data interface | CoaXPress |
| Sensor technology | CMOS |
| Pixel size | 2.5×2.5 µm |
| Dynamic range | 60 dB |
| Signal-to-noise ratio | 35 dB |
| Exposure time | 4…12 µs @ ultra-short exposure mode; 13…10000000 µs @ standard exposure mode |
| Auto exposure | Off, Once, Continuous, trigger width |
| Linear gain factor | 2.5 |
| Pixel format | Mono8, Mono10, Mono12 |
| Binning | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Decimation | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Data interface connector | Micro-BNC |
| Protocol compatibility | CoaXPress, GenICam |
| Third party software protocol | CoaXPress |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital I/O connector | P7 6-pin |
| Power delivery | external power supply, PoCXP |
| Cooling | fan |
| Ingress protection | IP40 |
| Working temperature | 0…50 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 40×40×66.5 mm |
| Weight | 134.2 g (approx.) |
| Certification | CE, RoHS, KC |
| Camera component power consumption | 7.1 W (typical) @ DC, supply voltage 12 V |
| Camera component supply voltage | 9…24 V @ DC |
| PoCXP support | yes |
| Reverse image | horizontal, vertical |
Documents
Selection and applications
Fast contour and position measurement. Strobed moving-part inspection. High-rate monochrome surface capture.
Minimum kit: Pair the camera with a C-mount lens covering the 1.1-inch sensor, a Micro-BNC CoaXPress cable and host interface, and PoCXP on CXP-0 or a 9–24 V DC supply.
Nearby in the range: MV-CH250-90Y1M-NN — Use it for 41.3 fps monochrome in a smaller passive Micro-BNC body; MV-CH250-90XM-C-NN — Use it when a DIN CoaXPress connection is needed at 41.5 fps; MV-CH250-90YM-C-NN V2.0 — Use it when full-frame monochrome speed must rise to 150 fps.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- CoaXPress
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What full-resolution speed does MV-CH250-90Y2M-C-NF reach?
The maximum listed output is 85 fps at 5120 × 5120 in Mono 8. The 26.2 MP Gpixel GMAX0505 uses a global shutter and 2.5 µm pixels, so the camera combines simultaneous exposure with dense monochrome sampling.
Which exposure modes are available for high-speed motion?
UltraShort exposure covers 4 μs to 12 μs, and standard exposure covers 13 μs to 10 sec. Pairing the short range with the global shutter and strobed illumination supports geometrically consistent capture of fast-moving features.
Can the Y2M camera be powered over its CoaXPress link?
Yes. CXP-0 supports PoCXP. The camera also accepts 9 V DC to 24 V DC through its power path, with typical consumption of 7.1 W at 12 V DC, allowing either listed supply arrangement to be integrated.
What trigger lines are presented on the 6-pin connector?
The P7 connection provides one opto-isolated input, one opto-isolated output, and one bidirectional non-isolated I/O line. These signals can coordinate the global-shutter capture with a part sensor, strobe, or station controller.
What mechanical and environmental limits apply at 85 fps?
The fan-cooled camera measures 40 mm × 40 mm × 66.5 mm and weighs about 134.2 g. IP40 applies with proper lens and wiring installation, and the stated working range is 0 °C to 50 °C with non-condensing humidity.