Area camera · CH Series

Hikrobot MV-CH250-92TC-C-NF V2.0

5120×5120 pxGpixel GMAX050541.5 fps10GigEIP40
Price on requestAn engineer will confirm pricing and lead time in the first reply.
Lead time
from 5 days
Warranty
36 months
Find the right model
Hikrobot MV-CH250-92TC-C-NF V2.0

Tasks and place in the range

Color transfer at 41.5 fps over 10 Gigabit Ethernet defines MV-CH250-92TC-C-NF V2.0. The 26.2 MP Gpixel GMAX0505 captures 5120 × 5120 Bayer BG 8 with a global shutter and 2.5 µm pixels. A C-mount is fitted to the 1.1-inch sensor, while fan cooling sits inside a 50 mm × 45 mm × 68.6 mm housing.

The camera can inspect moving labels, colored assemblies, and print registration at a cadence above the compact USB variants. UltraShort exposure from 3 μs to 8 μs supports a strobed process, with standard exposure extending to 10 sec. A 6-pin P7 connector presents isolated trigger input and output plus a bidirectional line, and the camera accepts 9–24 V DC with typical draw of 9.4 W at 12 V DC.

MV-CH250-92TM-C-NF V2.0 is the direct monochrome counterpart at 41.5 fps in the same C-mount body, drawing 9.1 W rather than 9.4 W. MV-CH250-90TC-M58S-NF retains color, speed, and 10 Gigabit Ethernet but changes to M58 × 0.75 in a 74 mm enclosure. MV-CH250-90VC is the smaller C-mount color option at 30 fps over dual USB 3.0.

Specifications

Shutterglobal
Sensor modelGpixel GMAX0505
Nominal optical sensor format1.1″
Sensor resolution5120×5120 px
Maximum frame rate41.5 fps @ BayerBG8, resolution 5120×5120 px
Color modecolor
Lens mountC-mount
Data interface10GigE (GigE compatible)
Sensor technologyCMOS
Pixel size2.5×2.5 µm
Dynamic range63 dB
Signal-to-noise ratio36 dB
Exposure time3…8 µs @ ultra-short exposure mode; 9…10000000 µs @ standard exposure mode
Auto exposureAuto, Off, Once
Linear gain factor2…5
Pixel formatBayerBG8, BayerBG10, BayerBG10Packed, BayerBG12, BayerBG12Packed
Binning1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4
Decimation1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4
Protocol compatibilityGigE Vision, GenICam
Communication protocol versionsGigE Vision 2.0
Third party software protocolGigE Vision
Client softwareMVS
Operating systemsWindows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit)
Digital I/O lines1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2
Digital input count1
Digital output count1
Digital I/O connectorP7 6-pin
Power supply9…24 V
Power consumption9.4 W (typical) @ DC, supply voltage 12 V
Ingress protectionIP40 @ with lens and cables properly installed
Working temperature0…50 °C
Storage temperature-30…80 °C
Humidity20…95 % @ non-condensing
Dimensions50×45×68.6 mm
Weight212 g (approx.)
CertificationCE, RoHS, KC
Reverse imagehorizontal, vertical

Documents

Datasheet MV-CH250-92TMTC V2 · PDF · 0.5 MB · English · revised 22 Jan 2026

Selection and applications

Moving label color inspection. Color assembly verification. Fast print registration capture.

Minimum kit: The minimum chain is the camera, a C-mount lens for the 1.1-inch sensor, a 10 Gigabit Ethernet cable and host link, and a 9–24 V DC supply.

Nearby in the range: MV-CH250-92TM-C-NF V2.0 — Prefer it for Mono 8 at the same 41.5 fps in the same enclosure; MV-CH250-90TC-M58S-NF — Prefer it for the same color rate with M58 × 0.75 optics; MV-CH250-90VC — Prefer it for a compact 30 fps color camera using dual USB 3.0.

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables
GigE10GigE
I/O & power cables
Hirose 6-pin IO
Power
Power

All accessory families →

FAQ

What color stream comes from MV-CH250-92TC-C-NF V2.0?

The camera outputs 5120 × 5120 Bayer BG 8 at up to 41.5 fps. Its Gpixel GMAX0505 provides 26.2 MP with a 2.5 µm pitch and global shutter, so color detail and simultaneous exposure are available at full frame.

Can this 10 Gigabit Ethernet model run on Gigabit Ethernet?

Yes. The primary interface is 10 Gigabit Ethernet at 10000 Mbit/s, and operation at 1000 Mbit/s Gigabit Ethernet is also supported. The host path must be sized for the image rate selected from the 41.5 fps capability.

How should exposure be set for a moving color target?

UltraShort mode runs from 3 μs to 8 μs and standard mode from 9 μs to 10 sec. The global shutter exposes all pixels at once; at the short end, a strobe can provide enough light while reducing motion during capture.

What power and trigger connections are present on this camera?

The supply range is 9 V DC to 24 V DC and typical consumption is 9.4 W at 12 V DC. A 6-pin P7 connection provides one isolated input, one isolated output, and one bidirectional non-isolated I/O line.

What C-mount coverage and cooling space does the 92TC need?

The lens must cover the 1.1-inch sensor through its C-mount and suit the 2.5 µm pixel pitch. The fan-cooled body measures 50 mm × 45 mm × 68.6 mm, weighs about 212 g, and operates from 0 °C to 50 °C.

Typical applications