Area camera · CH Series
Hikrobot MV-CH250-92TM-C-NF V2.0
- Lead time
- from 5 days
- Warranty
- 36 months
Where this model fits
A smaller fan-cooled package distinguishes MV-CH250-92TM-C-NF V2.0 among the 41.5 fps monochrome Ethernet variants. Its global-shutter Gpixel GMAX0505 sends 5120 × 5120 Mono 8 over 10 Gigabit Ethernet. The 26.2 MP, 1.1-inch sensor uses 2.5 µm pixels and C-mount optics, while the enclosure measures 50 mm × 45 mm × 68.6 mm.
Monochrome inspection of moving edges, alignment marks, and surface features can use full spatial sampling at production speed. UltraShort exposure starts at 3 μs for strobed motion arrest, and standard exposure continues to 10 sec. The P7 connector provides isolated trigger input and output together with bidirectional I/O; electrical input is 9–24 V DC and typical consumption is 9.1 W at 12 V DC.
MV-CH250-92TC-C-NF V2.0 retains the same rate, C-mount, fan-cooled body, and network link but changes to Bayer BG 8 color and draws 9.4 W. MV-CH250-90TM-C-NF also delivers 41.5 fps Mono 8 through 10 Gigabit Ethernet but uses a larger 74 mm × 74 mm × 78.8 mm body. MV-CH250-90Y2M-C-NF raises monochrome speed to 85 fps through Micro-BNC CoaXPress.
Specifications
| Shutter | global |
| Sensor model | Gpixel GMAX0505 |
| Nominal optical sensor format | 1.1″ |
| Sensor resolution | 5120×5120 px |
| Maximum frame rate | 41.5 fps @ Mono8, resolution 5120×5120 px |
| Color mode | mono |
| Lens mount | C-mount |
| Data interface | 10GigE (GigE compatible) |
| Sensor technology | CMOS |
| Pixel size | 2.5×2.5 µm |
| Dynamic range | 63 dB |
| Signal-to-noise ratio | 36 dB |
| Exposure time | 3…8 µs @ ultra-short exposure mode; 9…10000000 µs @ standard exposure mode |
| Auto exposure | Auto, Off, Once |
| Linear gain factor | 2…5 |
| Pixel format | Mono8, Mono10, Mono10Packed, Mono12, Mono12Packed |
| Binning | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Decimation | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Protocol compatibility | GigE Vision, GenICam |
| Communication protocol versions | GigE Vision 2.0 |
| Third party software protocol | GigE Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital input count | 1 |
| Digital output count | 1 |
| Digital I/O connector | P7 6-pin |
| Power supply | 9…24 V |
| Power consumption | 9.1 W (typical) @ DC, supply voltage 12 V |
| Ingress protection | IP40 @ with lens and cables properly installed |
| Working temperature | 0…50 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 50×45×68.6 mm |
| Weight | 212 g (approx.) |
| Certification | CE, RoHS, KC |
| Reverse image | horizontal, vertical |
Documents
Selection and applications
Moving edge measurement. Fast monochrome alignment inspection. Strobed surface-feature capture.
Minimum kit: Set up the camera with a C-mount lens covering the 1.1-inch sensor, a 10 Gigabit Ethernet cable and host connection, and a 9–24 V DC source.
Nearby in the range: MV-CH250-92TC-C-NF V2.0 — Select it for Bayer BG 8 color at the same 41.5 fps and body size; MV-CH250-90TM-C-NF — Select it for the same monochrome network rate in a larger 74 mm body; MV-CH250-90Y2M-C-NF — Select it when monochrome capture must rise to 85 fps over CoaXPress.
Cables and accessories for this model
Compatibility per manufacturer data.
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What Mono 8 rate does MV-CH250-92TM-C-NF V2.0 sustain?
The listed maximum is 41.5 fps at 5120 × 5120 Mono 8. The Gpixel GMAX0505 provides a 26.2 MP square array with 2.5 µm pixels and a global shutter, supporting dense simultaneous-exposure frames.
What network path carries the full-resolution mono images?
The camera uses 10 Gigabit Ethernet at 10000 Mbit/s and can also operate over 1000 Mbit/s Gigabit Ethernet. Plan the host adapter and processing path around the frame rate and Mono 8 image format required by the station.
Which exposure interval is available for strobed parts?
UltraShort exposure covers 3 μs to 8 μs, followed by standard exposure from 9 μs to 10 sec. The global shutter exposes the complete array together, allowing short illuminated captures of moving edges and registration marks.
How much electrical power does the 92TM version require?
The accepted input range is 9 V DC to 24 V DC. Typical consumption is 9.1 W at 12 V DC. A 6-pin P7 connection also carries one isolated input, one isolated output, and one bidirectional non-isolated line.
How does its housing differ from MV-CH250-90TM-C-NF?
Both cameras are fan-cooled C-mount monochrome models at 41.5 fps. MV-CH250-92TM-C-NF V2.0 measures 50 mm × 45 mm × 68.6 mm, while MV-CH250-90TM-C-NF measures 74 mm × 74 mm × 78.8 mm.