Area camera · CH series
Hikrobot MV-CH6040-10XM-M72-NF
- Lead time
- from 5 days
- Warranty
- 36 months
Ultra-high-resolution CoaXPress positioning
A 28416 × 21280 Sony IMX411 sensor makes MV-CH6040-10XM-M72-NF the maximum-resolution camera in this group. The 66.7 mm rolling-shutter CMOS array uses 3.76 µm pixels and records Mono 8 at up to 1.45 fps through CoaXPress with a DIN interface. Its profile is broad-area monochrome capture where hundreds of megapixels per frame outweigh rapid cadence.
The camera is suited to stationary large-panel surface maps, fine-feature measurement across a wide field, and single-frame documentation of expansive targets. Its M72-mount and 19.55 mm back focal length address the large sensor, while binning from 1×1 through 4×4 offers alternate grouped-pixel readout. A 24 V DC supply powers the typical 15 W load in the 100 mm × 100 mm × 128.5 mm body.
MV-CH650-90XM-F-NF reduces resolution to 9344 × 7000 but adds global shutter and raises speed to 31.5 fps for moving targets. MV-CH800-60TM-M58S-NN provides 10304 × 7712 Mono output at 15 fps over 10 Gigabit Ethernet. MV-CH050-90XM-C-NN is smaller at 2592 × 2160, but its CoaXPress global-shutter stream reaches 213 fps.
Specifications
| Shutter | rolling |
| Sensor model | Sony IMX411 |
| Sensor resolution | 28416×21280 px1 |
| Maximum frame rate | 1.45 fps @ Mono8, resolution 28416×21280 px |
| Color mode | mono |
| Lens mount | M72×0.75 |
| Data interface | CoaXPress; RS-232 |
| Sensor technology | CMOS |
| Pixel size | 3.76×3.76 µm |
| Dynamic range | 78.7 dB |
| Signal-to-noise ratio | 46.4 dB |
| Exposure time | 15…1000000 µs |
| Auto exposure | Auto, Off, Once, rolling shutter, global reset |
| Gain | 0…40 dB |
| Pixel format | Mono8, Mono10, Mono12, Mono16 |
| Binning | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Decimation | not available |
| Data interface connector | DIN |
| Protocol compatibility | CoaXPress, GenICam |
| Third party software protocol | CoaXPress |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital input count | 1 |
| Digital output count | 1 |
| Digital I/O connector | P10 12-pin |
| Power supply | 24 V |
| Power delivery | external power supply |
| Power consumption | 15 W (typical) @ DC, supply voltage 24 V |
| Cooling | fan |
| Ingress protection | IP40 @ with lens and cables properly installed |
| Working temperature | 0…50 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 100×100×128.5 mm |
| Weight | 1400 g (approx.) |
| Certification | CE, RoHS, KC |
| Back focal length | 19.4…19.6 mm |
| Performance temperature | 20…35 °C |
| Physical sensor diagonal | 66.7 mm |
| Cooling fan present | yes |
| Port inventory | CoaXPress CXP-6 ×4 (data), RS-232 (serial) |
| Reverse image | horizontal |
| System memory required | ≥16 GB |
1 unofficial data
Documents
Selection and applications
Stationary large-panel surface mapping. Ultra-fine wide-field measurement. Broad-target monochrome documentation.
Minimum kit: The minimum setup is MV-CH6040-10XM-M72-NF, an M72*0.75 lens covering 66.7 mm, a CoaXPress DIN cable and matching acquisition interface, and a 24 V DC supply.
Nearby in the range: MV-CH650-90XM-F-NF — Prefer it for 31.5 fps global-shutter acquisition at 9344 × 7000; MV-CH800-60TM-M58S-NN — Prefer it for 10304 × 7712 Mono output at 15 fps over 10 Gigabit Ethernet; MV-CH050-90XM-C-NN — Prefer it for 213 fps CoaXPress capture when 2592 × 2160 is sufficient.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- CoaXPress
- Power
- Power
- Mounting
- Camera mounts
FAQ
What is the full-resolution operating rate of this IMX411 camera?
MV-CH6040-10XM-M72-NF records 28416 × 21280 Mono 8 at up to 1.45 fps. The specification also lists 1.38 fps at 14208 × 10640 in RGB 8, while the model's mono designation identifies its primary full-resolution output.
Which M72 lens interface covers the 66.7 mm IMX411 sensor?
The camera uses an M72*0.75 lens interface, described as M72-mount, with a 19.55 mm back focal length. Optics must cover the 66.7 mm sensor and resolve its 3.76 µm pixels across the 28416 × 21280 image.
How is image data carried from MV-CH6040-10XM-M72-NF?
Image data uses CoaXPress through a DIN interface. The system therefore requires a matching CoaXPress cable and acquisition connection sized for the selected pixel format. The camera's 12-pin P10 provides separate I/O and an RS-232 channel.
What power and thermal figures govern integration?
The camera requires 24 V DC and has typical consumption listed at 15 W. Its performance temperature band is 20 °C to 35 °C, while the broader working range is 0 °C to 50 °C. Thermal design should preserve the specified operating conditions.
Which binning settings are available for reduced sampling?
Binning is listed from 1×1 through 4×4, including horizontal, vertical, and combined groupings. These modes allow the acquisition to reduce spatial sampling when the full 28416 × 21280 raster is unnecessary for a particular inspection.
What mechanical load should the camera mount support?
The enclosure measures 100 mm × 100 mm × 128.5 mm and weighs 1.4 kg. It is rated IP40 and operates from 0 °C to 50 °C. The mechanical fixture should support both the camera mass and the large-format M72 optical assembly.