Hikrobot MV-CH650-90XM-F-NF

Large-format motion imaging with CoaXPress

Global-shutter acquisition at 9344 × 7000 and 31.5 fps gives MV-CH650-90XM-F-NF a high-resolution motion-inspection profile. Its Gpixel GMAX3265 CMOS sensor measures 29.9 mm × 22.4 mm, uses 3.2 µm pixels, and outputs Mono 8, Mono 10, or Mono 12 through CoaXPress with a DIN interface. The combination preserves geometry while sampling a broad field densely.

The camera fits large-part dimensional inspection, moving web or panel review, high-detail conveyor analysis, and synchronized mechanism capture. Exposure begins at 14 µs, and the P10 connection provides isolated input and output, a bidirectional line, and RS-232 for machine coordination. F-mount or M58*0.75 optics cover alternative mechanical builds, with the corresponding flange-back and body-depth figures stated separately.

MV-CH6040-10XM-M72-NF expands resolution to 28416 × 21280 but uses rolling shutter and runs at 1.45 fps. MV-CH050-90XM-C-NN raises speed to 213 fps while reducing the raster to 2592 × 2160 and using C-mount. MV-CH250-25TM-M58S-NF shifts to 10 Gigabit Ethernet at 5120 × 5120 and 40 fps.

Documents

Selection and applications

Large-part global-shutter measurement. Moving panel surface inspection. High-detail synchronized mechanism capture.

Minimum kit: The minimum setup is MV-CH650-90XM-F-NF, an F-mount or M58*0.75 lens covering 29.9 mm × 22.4 mm, a CoaXPress DIN cable and acquisition interface, and a 9 V DC to 24 V DC supply.

Nearby in the range: MV-CH6040-10XM-M72-NF — Prefer it for 28416 × 21280 stationary capture when 1.45 fps is sufficient; MV-CH050-90XM-C-NN — Prefer it for 213 fps global-shutter imaging at 2592 × 2160; MV-CH250-25TM-M58S-NF — Prefer it for 5120 × 5120 global-shutter capture at 40 fps over 10 Gigabit Ethernet.

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables

CoaXPress

I/O & power cables

12-pin IO

Power

Power

Mounting

Camera mounts

All accessory families →

FAQ

Which mount configurations are specified for MV-CH650-90XM-F-NF?

The camera supports F-mount or M58*0.75. F-mount has a 46.5 mm flange-back length and a 74 mm × 74 mm × 76.4 mm body depth; M58 uses 11.48 mm flange-back length and a 74 mm × 74 mm × 70.4 mm body.

How does global shutter preserve geometry at 9344 × 7000?

The GMAX3265 exposes the image globally, preserving geometry of moving objects across the 9344 × 7000 frame. At up to 31.5 fps and with exposure down to 14 µs, the camera can combine fine spatial sampling with controlled high-speed illumination.

What acquisition path is required for the CoaXPress output?

MV-CH650-90XM-F-NF uses CoaXPress with a DIN interface and supports Mono 8, Mono 10, and Mono 12 formats. A matching CoaXPress cable and acquisition interface are therefore required for the selected format and 31.5 fps data stream.

Which power range and consumption apply to this model?

The camera accepts 9 V DC to 24 V DC. Typical monochrome consumption is 10.5 W. Supply sizing should include this camera load and the operating arrangement for the P10 connection, which also carries machine I/O and RS-232.

Can binning or decimation reduce the native image?

Both binning and decimation are listed from 1×1 to 4×4. These functions allow a lower sampled output when the full 9344 × 7000 frame is unnecessary, while the native 3.2 µm pixel geometry remains the basis for lens selection.

What enclosure and humidity limits govern placement?

The camera is IP40 and operates from 0 °C to 50 °C at 20% to 95% RH. The F-mount version weighs 500 g and the M58 version 470 g, so the fixture and environmental protection should match the selected mechanical configuration.