Area camera · CH610 series
Hikrobot MV-CH610-10TM-F-TF V2.0
- Warranty
- 36 months
Large-format 10 GigE imaging
A 41 x 31.1 mm Sony IMX455 sensor and F-mount optics define this large-format monochrome camera. It records 9568 x 6380 pixels with 3.76 x 3.76 µm sampling at up to 17.9 fps. The rolling-shutter image stream uses 10 Gigabit Ethernet with Gigabit Ethernet support, while TEC-mode consumption identifies the thermally managed operating configuration.
The format suits high-detail surface capture, static geometry measurement and repeated imaging of broad objects when F-mount coverage is part of the optical design. Exposure spans 9 μs to 10 sec and gain spans 0 to 36 dB, allowing short synchronized acquisition or longer integration. Trigger and device coordination are available through the 12-pin P10 I/O connection.
MV-CH650-60TM-M58S-NN is a smaller-sensor M58 alternative with 9344 × 7008 output at 17.5 fps and 13.3 W typical consumption at 12 V DC. MV-CH2450-10YM-M72-TF raises resolution to 19200 × 12800 at 12.4 fps but switches to HDBNC CoaXPress and M72. MV-CH320-60TM-M58S-NN reaches 30 fps over 10 Gigabit Ethernet at a lower 7744 × 4336 resolution.
Specifications
| Sensor type | CMOS, rolling shutter |
| Sensor model | Sony IMX455 |
| Sensor format | 41 × 31.1 mm |
| Resolution | 9568 × 6380 px |
| Pixel size | 3.76 × 3.76 µm |
| Maximum frame rate | 17.9 fps |
| Mono color | Mono |
| Dynamic range | 75.3 dB |
| Exposure time | 9 μs to 10 sec |
| Gain | 0 to 36 dB |
| SNR | 46.8 dB |
| Data interface | 10 Gigabit Ethernet (10000 Mbit/s), compatible with Gigabit Ethernet (1000 Mbit/s) |
| Digital I/O | 12-pin P10 connector; opto-isolated input x1; opto-isolated output x1; bi-directional non-isolated I/O x1; RS-232 × 1 |
| Lens mount | F-mount |
| Power supply | 24 VDC |
| Power consumption | 27.6 W @ 24 VDC (TEC mode) |
| Ingress protection | IP40 |
| Operating temperature | 0 to 50 °C |
| Storage temperature | -30 to 80 °C |
| Humidity | 20% to 95% RH, no condensation |
| Dimensions | 100 × 100 × 82 mm |
| Weight | Approx. 1090 g |
| Compatibility | GigE Vision V2.0, GenICam |
| Flange back length | 46.5 mm |
Selection and applications
Large-format monochrome surface capture. Static geometry measurement. Thermally managed repeated imaging.
Minimum kit: Combine the camera with an F-mount lens, a 10 Gigabit Ethernet cable and a 24 V DC power supply sized for 27.6 W TEC-mode operation.
Nearby in the range: MV-CH650-60TM-M58S-NN — Choose it for M58 optics, 9344 × 7008 output and 13.3 W typical consumption at 12 V DC.; MV-CH2450-10YM-M72-TF — Choose it when 19200 × 12800 resolution is preferred over 17.9 fps network acquisition.; MV-CH320-60TM-M58S-NN — Choose it when 30 fps matters more than the 41 x 31.1 mm sensor format..
Cables and accessories for this model
Compatibility per manufacturer data.
- Power
- Power
- Mounting
- Camera mounts
FAQ
What F-mount optical geometry applies to the IMX455 sensor?
The camera uses F-mount with a 46.5 mm flange-back length. Select an F-mount lens that covers the 41 x 31.1 mm sensor and resolves 3.76 x 3.76 µm sampling across 9568 x 6380 pixels. M58 and M72 optics use different native interfaces.
How does rolling exposure shape the intended applications?
The Sony IMX455 has a rolling shutter, so static targets or synchronized motion and illumination are appropriate for geometry-sensitive work. Exposure can be adjusted from 9 μs to 10 sec, providing timing flexibility without changing the row-sequential readout principle.
What network path carries images at up to 17.9 fps?
The primary interface is 10 Gigabit Ethernet at 10 Gbit/s, and Gigabit Ethernet at 1 Gbit/s is also supported. Use the link configuration that accommodates the selected 9568 x 6380 image rate and the receiving system's throughput.
What supply is required when the camera runs in TEC mode?
The camera requires 24 V DC and draws 27.6 W at 24 V DC in TEC mode. Provide that power separately from the Ethernet connection. The 12-pin P10 also carries isolated input and output, bidirectional non-isolated I/O and RS-232.
Which body and ambient figures matter during integration?
The housing is 100 x 100 x 82 mm and weighs approximately 1090 g. Operation is listed from 0 to 50 °C, storage from -30 to 80 °C and humidity from 20% to 95% RH without condensation. Its ingress rating is IP40.