Area camera · CH650 series
Hikrobot MV-CH650-60TM-M58S-NN
- Warranty
- 36 months
Detailed imaging at a balanced cadence
A 9344 × 7008 monochrome frame at 17.5 fps gives this Stacked BSI model a balance of spatial coverage and acquisition cadence. The 30 × 22.4 mm sensor uses 3.2 × 3.2 µm pixels and a rolling shutter. Images are transported through 10 Gigabit Ethernet, with Gigabit Ethernet support, and the M58*0.75 interface accommodates optics for the larger-than-C-mount sensor.
This camera fits stationary surface inspection, controlled-motion dimensional capture and repeated observation of broad components. Its exposure interval ranges from 58 µs to 9.9 sec, while gain can be set from 0 to 24 dB to match signal level and illumination. The 12-pin P10 connection supports external timing through isolated input and output, bidirectional I/O and RS-232.
MV-CH610-10TM-F-TF V2.0 uses a larger 41 x 31.1 mm Sony IMX455 sensor, F-mount and 17.9 fps, with 9568 x 6380 output. MV-CH320-60TM-M58S-NN shares the M58 and 10 Gigabit Ethernet architecture but trades resolution for a 30 fps rate at 7744 × 4336. MV-CH2450-10YM-M72-TF extends resolution to 19200 × 12800 at 12.4 fps when CoaXPress and M72 optics suit the system.
Specifications
| Sensor type | CMOS, rolling shutter |
| Sensor model | Stacked BSI |
| Sensor format | 30 × 22.4 mm |
| Resolution | 9344 × 7008 |
| Pixel size | 3.2 × 3.2 µm |
| Maximum frame rate | 17.5 fps @9344 × 7008 |
| Mono color | Mono |
| Dynamic range | 69.1 dB |
| Exposure time | 58 µs to 9.9 sec |
| Gain | 0 to 24 dB |
| SNR | 43 dB |
| Data interface | 10 Gigabit Ethernet (10000 Mbit/s), compatible with Gigabit Ethernet (1000 Mbit/s) |
| Digital I/O | 12-pin P10 connector; opto-isolated input x 1; opto-isolated output x 1; bi-directional non-isolated I/O x 1; RS-232 × 1 |
| Lens mount | M58*0.75 |
| Power supply | 9 VDC to 24 VDC |
| Power consumption | Typ. 13.3 W @12 VDC |
| Ingress protection | IP40 |
| Operating temperature | 0 to 50 °C |
| Humidity | 20 to 95 % RH |
| Dimensions | 84 mm × 84 mm × 92.5 mm |
| Weight | Approx. 600 g |
| Compatibility | GigE Vision V2.0, GenICam |
| Flange back length | 11.48 mm |
Selection and applications
Broad-component surface inspection. Controlled-motion dimensional capture. Repeated high-detail observation.
Minimum kit: Start with the camera, an M58*0.75 lens, a 10 Gigabit Ethernet cable and a 9 V DC to 24 V DC power supply.
Nearby in the range: MV-CH610-10TM-F-TF V2.0 — Choose it for a 41 x 31.1 mm Sony IMX455 sensor, F-mount and 17.9 fps.; MV-CH320-60TM-M58S-NN — Choose it when 30 fps is required and 7744 × 4336 resolution is sufficient.; MV-CH2450-10YM-M72-TF — Choose it for 19200 × 12800 capture over CoaXPress at 12.4 fps..
Cables and accessories for this model
Compatibility per manufacturer data.
- Power
- Power
- Mounting
- Camera mounts
FAQ
Which lens must cover the 30 × 22.4 mm imaging area?
Use an M58*0.75 lens with coverage for the 30 × 22.4 mm sensor. The flange-back length is 11.48 mm, and the optical resolution should match 3.2 × 3.2 µm pixels across 9344 × 7008. C-mount is not the native interface.
What motion precautions follow from the rolling shutter?
The sensor exposes rows sequentially, so geometry-sensitive captures should use a stationary object or coordinated illumination and motion. Exposure is adjustable from 58 µs to 9.9 sec, and the maximum full-resolution frame rate is 17.5 fps.
How should the Ethernet link be chosen for full-resolution transfer?
The camera supports 10 Gigabit Ethernet at 10 Gbit/s and Gigabit Ethernet at 1 Gbit/s. The faster connection is appropriate when moving the 9344 × 7008 stream near 17.5 fps; the selected link must match the intended image rate.
What are the power and external-control requirements?
Input power spans 9 V DC to 24 V DC, with typical consumption of 13.3 W at 12 V DC. The 12-pin P10 offers one isolated input, one isolated output, one bidirectional non-isolated I/O and one RS-232 channel for external timing.
What physical and environmental limits apply to the CH650 body?
The camera measures 84 mm × 84 mm × 92.5 mm and weighs approximately 600 g. Its operating range is 0 to 50 °C with 20 to 95 % RH, and its ingress rating is IP40. Mechanical and environmental provisions should follow those limits.