Line scan camera · CL series
Hikrobot MV-CL042-91GM
- Warranty
- 36 months
GigE 4K scanning with selectable TDI
Selectable 1-Line and 2-TDI imaging is specified for MV-CL042-91GM, a 4096 × 2 Gigabit Ethernet camera. Its CMOS array uses 7 × 7 µm pixels and runs at 28 kHz in standard mode or 80 kHz in high-bandwidth mode. Exposure ranges from 5 µs to 10 ms, and the network port supports 1000 Mbit/s Gigabit Ethernet with backward operation at 100 Mbit/s.
This model fits measurement of moving webs, edges or repeated parts when 4096 samples are required across the line and the acquisition architecture is Ethernet-based. Four configurable I/O connections accept single-ended or differential timing, allowing an encoder or controller to govern line capture. The IP40 body measures 62 × 62 × 41 mm and operates from -20 °C to 55 °C.
MV-CL042-91GC matches its 4096 × 2 geometry, 7 µm pitch and 28/80 kHz rate pair. MV-CL024-91GM reduces line length to 2048 pixels and reaches 86 kHz in high-bandwidth Mono 8, while retaining a Gigabit Ethernet link. MV-CL044-91NM keeps network transport but moves to 2.5 Gigabit Ethernet, a 4096 × 4 array and 1-Line, 2-TDI or 4-TDI modes.
Specifications
| Sensor type | CMOS |
| Resolution | 4096 × 2 px |
| Pixel size | 7 × 7 um |
| Dynamic range | 65.6 dB |
| Exposure time | 5 us to 10 ms |
| SNR | 40 dB |
| Data interface | Gigabit Ethernet (1000 Mbit/s), compatible with Fast Ethernet (100 Mbit/s) |
| Digital I/O | 4 configurable input/output lines; single-end/differential supported |
| Lens mount | M42*1.0 |
| Power supply | 12 to 24 VDC |
| Power consumption | 5.8 W |
| Ingress protection | IP40 |
| Operating temperature | -20 to 55 C |
| Humidity | 5 to 90 % RH |
| Dimensions | 62 × 62 × 41 mm |
| Weight | 280 g |
| Compatibility | GigE Vision V2.0, GenICam |
| Flange back length | 12 mm |
| Image mode | 1 Line/2 TDI |
| Max line rate (high-bandwidth) | 80 kHz |
| Max line rate (standard) | 28 kHz |
Selection and applications
4K GigE inspection. 2-TDI moving-web scanning. Encoder-synchronized line imaging.
Minimum kit: Install the MV-CL042-91GM with an M42*1.0 line-scan lens, a Gigabit Ethernet cable, and a 12 V DC to 24 V DC supply sized for 5.8 W.
Nearby in the range: MV-CL042-91GC — Prefer it when the required 4096 × 2, 28/80 kHz configuration has specified consumption of 6.6 W.; MV-CL024-91GM — Prefer it for a shorter 2048-pixel mono line at up to 86 kHz.; MV-CL044-91NM — Prefer it for 4-TDI and 2.5 Gigabit Ethernet..
Cables and accessories for this model
Compatibility per manufacturer data.
- Power
- Power
- Mounting
- Camera mounts
FAQ
Which image modes can be selected on the MV-CL042-91GM?
The camera lists 1-Line and 2-TDI modes for its 4096 × 2 CMOS array. Maximum line rate is 28 kHz in standard mode and 80 kHz in high-bandwidth mode, with exposure adjustable between 5 µs and 10 ms.
What lens dimensions must match the MV-CL042-91GM line?
The camera has an M42*1.0 mount and 12 mm flange back length. Select line-scan optics with coverage for the 4096-pixel line and resolving performance appropriate to the 7 × 7 µm pixels and required object sampling.
How are data and input power connected to the MV-CL042-91GM?
The camera takes 12 V DC to 24 V DC and consumes 5.8 W. Plan the documented DC input for power alongside the Gigabit Ethernet connection for image transfer, with the four configurable I/O lines reserved for machine timing.
How can MV-CL042-91GM be synchronized to moving material?
Four configurable input/output lines are provided and support single-ended or differential signals. These lines can carry the required machine timing independently of the Gigabit Ethernet image path, whose high-bandwidth line-rate ceiling is 80 kHz.
When is the longer MV-CL044-91NM array a better fit?
MV-CL042-91GM provides 4096 × 2 and 1-Line/2-TDI at up to 80 kHz. MV-CL044-91NM provides 4096 × 4, adds 4-TDI, uses 2.5 Gigabit Ethernet and reaches 160 kHz after a reduced region of interest.