Line scan camera · CL Series
Hikrobot MV-CL084-91Y2M
- Lead time
- from 5 days
- Warranty
- 36 months
CXP-10 transport for multi-light 8K scanning
Two CXP-10 Micro-BNC interfaces distinguish MV-CL084-91Y2M from the fiber and Camera Link 8K models. Its 8192 × 4 mono CMOS array uses 7 × 7 µm pixels and supports 1-Line, 2-TDI and 4-TDI. In 1-light mode it reaches 200 kHz in 1-Line, 100 kHz in 2-TDI and 50 kHz in 4-TDI, with PoCXP supported on CXP-0 and CXP-1.
Multi-light control allows successive line captures to be associated with different illumination states on a moving surface. The 2-light mode reaches 52 kHz in 1-Line or 26 kHz in 2-TDI, while 3-light and 4-light 1-Line modes reach 34.6 kHz and 26 kHz respectively. Four configurable I/O lines on the 12-pin P10 connector support single-ended or differential synchronization.
MV-CL084-91F2M shares the 8192 × 4 array geometry, 7 µm pixel size, scan modes and complete multi-light rate table but uses a 2LC fiber connector and draws 15.4 W rather than 15.5 W typically. MV-CL084-91CM uses 5 µm pixels and Camera Link, with a 100 kHz 80-bit ceiling. MV-CL084-91CM-PRO adds an 8192 × 16 array for multi-lamp work, though its 1-lamp Full-mode rate is 75 kHz.
Available versions
One device, different revisions. We ship the current one by default; if a specific revision is already installed on your line, name it in the request and we will match it.
| Part number | PN | Version | |
|---|---|---|---|
| MV-CL084-91Y2M discontinued | 306302764 / 306303723 | — | |
| MV-CL084-91Y2M V2.0 | 306303810 | V2.0 |
Specifications
| Sensor resolution | 8192×4 px |
| Maximum line rate | 200000 Hz @ 1-line, number of lights (multi-light mode) 1 100000 Hz @ 2-line TDI, number of lights (multi-light mode) 1 50000 Hz @ 4-line TDI, number of lights (multi-light mode) 1 Show all (7)52000 Hz @ 1-line, number of lights (multi-light mode) 226000 Hz @ 2-line TDI, number of lights (multi-light mode) 2 34600 Hz @ 1-line, number of lights (multi-light mode) 3 26000 Hz @ 1-line, number of lights (multi-light mode) 4 |
| Line/TDI image mode | single line, 2-TDI, 4-TDI |
| Color mode | mono |
| Lens mount | M72×0.75; F-mount (via adapter) |
| Data interface | CoaXPress |
| Sensor technology | CMOS |
| Pixel size | 7×7 µm |
| Dynamic range | 63.4 dB |
| Signal-to-noise ratio | 40.8 dB |
| Exposure time | 3…10000 µs |
| Auto exposure | Auto, Off, Once, trigger width |
| Linear gain factor | 1 |
| Pixel format | Mono8, Mono10, Mono12 |
| Binning | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Trigger mode | external, internal; line, frame, line and frame @ external trigger |
| Flange focal distance | 12 mm |
| Data interface connector | Micro-BNC |
| Protocol compatibility | CoaXPress, GenICam |
| Third party software protocol | CoaXPress |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 4 bidirectional lines, single-ended, differential, lines 0, 1, 3, 4 |
| Digital I/O connector | P10 12-pin |
| Power supply | 12…24 V @ DC |
| Power delivery | external power supply; PoCXP @ ports CXP-0, CXP-1 |
| Power consumption | 15.5 W (typical) @ DC, supply voltage 24 V |
| Ingress protection | IP40 @ with lens and cables properly installed |
| Working temperature | -20…50 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 132×76×51.4 mm |
| Weight | 520 g (approx.) |
| Certification | CE, RoHS, KC |
| PoCXP support | yes |
| Transmission mode | one link, two links |
| CoaXPress generation | CXP-10 |
| Reverse image | horizontal |
| Supported multi-light count | 1; 2; 3; 4 |
Documents
Selection and applications
8K multi-light CXP inspection. PoCXP mono line acquisition. 4-TDI scanning through CXP-10.
Minimum kit: Combine the MV-CL084-91Y2M with an M72*0.75 line-scan lens or adapted F-mount optic, two CXP-10 Micro-BNC cables and a matching receiver, using PoCXP or a 12 V DC to 24 V DC supply.
Nearby in the range: MV-CL084-91F2M — Prefer it for the same 8192 × 4 multi-light rates through 2LC fiber; MV-CL084-91CM — Prefer it for 5 µm mono pixels over Camera Link; MV-CL084-91CM-PRO — Prefer it for an 8192 × 16 sensor with multi-lamp control.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- CoaXPress
- I/O & power cables
- 12-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
How many CXP-10 links are provided on MV-CL084-91Y2M?
The camera has two CXP-10 interfaces using Micro-BNC connections. CXP-0 and CXP-1 support PoCXP, so an acquisition arrangement with matching receiver support can carry power through those coaxial links.
What line rates apply in MV-CL084-91Y2M 1-light mode?
The listed maxima are 200 kHz in 1-Line, 100 kHz in 2-TDI and 50 kHz in 4-TDI. The sensor remains 8192 × 4 mono with 7 µm pixels in each case, and the selected mode determines the available rate.
How does additional lighting affect MV-CL084-91Y2M speed?
Two-light operation reaches 52 kHz in 1-Line and 26 kHz in 2-TDI. Three-light 1-Line runs at 34.6 kHz, while four-light 1-Line runs at 26 kHz. These are separate limits from the 200 kHz single-light rate.
What lens interface should be used with MV-CL084-91Y2M?
MV-CL084-91Y2M provides an M72*0.75 mount at a 12 mm flange back length. An F-mount lens can be attached through an adapter ring, provided it covers the 8192-pixel line and resolves 7 µm pixels.
Can MV-CL084-91Y2M also use a separate DC power input?
Yes. The camera accepts 12 V DC to 24 V DC in addition to PoCXP support on CXP-0 and CXP-1. Typical consumption is 15.5 W at 24 V DC, and the 12-pin P10 connector also provides four configurable I/O lines.