Line scan camera · CL Series
Hikrobot MV-CL086-91CC-PRO
- Lead time
- from 5 days
- Warranty
- 36 months
Applications and neighboring color models
Twelve sensor rows and selectable TDI make MV-CL086-91CC-PRO the extended Camera Link member of the 8192-pixel color group. The CMOS array is 8192 × 12 with 5 µm pixels and supports 1-line, 2-TDI and 4-TDI acquisition. Link configurations provide 10 kHz in Base, 20 kHz in Medium and 34 kHz in 80-bit mode. The arrangement addresses color line inspection that needs a choice of integration depth without changing the 8192-pixel line length.
A 3 µs to 10 ms exposure range, 62 dB dynamic range and listed gains of 1.2 ×, 2.7 × and 4.6 × provide acquisition adjustment. The 12-pin P10 connector carries four configurable I/O lines with single-ended or differential signaling, while CC1 to CC4 are available through Camera Link. The M72*0.75 lens interface has a 12 mm flange back and supports F-mount optics through an adapter. The camera takes 24 VDC, consumes 20.5 W typically and operates from –20 °C to 60 °C.
MV-CL086-91CC-PRO differs from MV-CL086-91CC through its 8192 × 12 arrangement and added 4-TDI mode; the non-PRO model is only 46.2 mm deep and consumes 9.6 W typically at 12 VDC. MV-CL086-B0F1C also provides 8192 × 12 color capture and 4-TDI, but transports data over LC fiber at 40 kHz under every image mode. For Gigabit Ethernet installations, MV-CL086-91GC retains the smaller 8192 × 6 arrangement and reaches 40 kHz in high-bandwidth operation.
Specifications
| Sensor resolution | 8192×12 px |
| Maximum line rate | 10000 Hz @ Base; 20000 Hz @ Medium; 34000 Hz @ 80-bit (Deca) |
| Line/TDI image mode | single line, 2-TDI, 4-TDI |
| Color mode | color |
| Lens mount | M72×0.75 |
| Data interface | Camera Link |
| Sensor technology | CMOS |
| Pixel size | 5×5 µm |
| Dynamic range | 62 dB |
| Signal-to-noise ratio | 42 dB |
| Exposure time | 3…10000 µs |
| Auto exposure | Off, Once, Continuous, fixed exposure time, trigger width |
| Linear gain factor | 1.2; 2.7; 4.6 |
| Pixel format | RGB, Mono8, Mono10 |
| Binning | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Trigger mode | external, internal; line, frame @ external trigger; line, frame @ external trigger, line + frame trigger |
| Flange focal distance | 12 ±0.15 mm |
| Data interface connector | Camera Link SDR |
| Protocol compatibility | Camera Link, GenICam |
| Communication protocol versions | Camera Link 2.0 |
| Third party software protocol | Camera Link |
| Client software | MVS, third-party Camera Link frame grabbers |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit) |
| Digital I/O lines | 4 bidirectional lines, single-ended, differential, lines 0, 1, 3, 4 |
| Digital I/O connector | P10 12-pin |
| Power supply | 24 V |
| Power consumption | 20.5 W (typical) @ DC, supply voltage 24 V |
| Ingress protection | IP40 @ with lens and cables properly installed |
| Working temperature | -20…60 °C |
| Storage temperature | -30…80 °C |
| Humidity | 5…90 % @ non-condensing |
| Dimensions | 84×84×89 mm |
| Weight | 883 g (approx.) |
| Certification | CE, RoHS, KC |
| Camera Link configuration | Base, Medium, 80-bit |
| Mounts via adapter | F-mount (via adapter) |
| Camera link control lines | CC1, CC2, CC3, CC4 |
| Pixel clock | 40000000 Hz; 66000000 Hz; 80000000 Hz; 85000000 Hz |
| Port inventory | Camera Link ×2 (data), USB (firmware update) |
| Reverse image | horizontal |
| Tap count | 1 2 4 Show all (5)810 |
| Tap geometry | 1X, 1X2, 1X4, 1X10 |
Documents
Selection and applications
8192-pixel 4-TDI color inspection. 80-bit Camera Link line capture. Multi-row color surface scanning.
Minimum kit: Pair MV-CL086-91CC-PRO with an M72*0.75 lens or adapted F-mount lens, an SDR Camera Link cable, and a 24 VDC supply through its 12-pin P10 connection.
Nearby in the range: MV-CL086-91CC — Prefer it for 8192 × 6 color capture in a 46.2 mm-deep Camera Link body; MV-CL086-B0F1C — Prefer it when the same 8192 × 12 class must use LC fiber at 40 kHz; MV-CL166-B0F2C — Prefer it when color inspection requires a 16384 × 12 format and 2LC fiber transport.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- Camera Link
- I/O & power cables
- 12-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
When does the 4-TDI mode of MV-CL086-91CC-PRO become relevant?
This model offers 1-line, 2-TDI and 4-TDI operation on its 8192 × 12 color CMOS array. The selectable row integration lets an acquisition setup choose among the three stated scan modes while retaining the same 8192-pixel line length.
What Camera Link rates must the MV-CL086-91CC-PRO host handle?
Maximum line rate is 10 kHz for Base, 20 kHz for Medium and 34 kHz for the 80-bit configuration. The camera uses an SDR Camera Link connector, and its separate USB interface is reserved for firmware updates.
Which supply and thermal limits apply to MV-CL086-91CC-PRO?
The required supply is 24 VDC and typical draw is 20.5 W. Rated operation spans –20 °C to 60 °C, storage spans –30 °C to 80 °C, and the permitted humidity range is 5% RH to 90% RH without condensation.
How should an F-mount lens be fitted to the PRO color line camera?
MV-CL086-91CC-PRO has an M72*0.75 mount with a 12 mm flange-back distance. The stated route to F-mount optics is a lens adapter; the selected optic must also cover the full 8192-pixel color line.
How is MV-CL086-91CC-PRO mechanically different from MV-CL086-91CC?
Both bodies have an 84 mm × 84 mm face, but the PRO version is 89 mm deep and weighs about 883 g. MV-CL086-91CC is 46.2 mm deep and about 476 g, a material difference for mounting depth and supported mass.