Line scan camera · CL Series
Hikrobot MV-CL166-B0F2C
- Warranty
- 36 months
Long color line with multi-row acquisition
Full 16384-pixel color coverage with up to 4-TDI gives MV-CL166-B0F2C its place in the fiber range. The CMOS sensor is 16384 × 12 with 5 µm × 5 µm pixels, supporting 1-Line, 2-TDI and 4-TDI scanning. A 2LC fiber connector carries image data at a maximum 40 kHz. The format is suited to wide color line inspection where integration mode is selected for the scene while line length remains fixed.
Acquisition adjustment includes a 3 µs to 10 ms exposure range, 1.0 × to 4.0 × listed gain steps and 62.6 dB dynamic range. Digital I/O is not supported. The camera requires 24 VDC and consumes 23.8 W typically. Its M90*1.0 mount has a 12 mm flange back and accepts an F-mount lens through an adapter. The 99 mm × 99 mm × 81.7 mm, 870 g housing is rated IP40 and operates from –20 °C to 50 °C.
MV-CL166-B0F2C has twice the sensor-row count of MV-CL166-B0F2C-BASE: the BASE model is 16384 × 6, supports only 1-Line and 2-TDI, and offers up to 48.3 kHz depending on link and format. MV-CL166-91F2C also uses 16384 × 12 color capture, adds 3-TDI and reaches 47.3 kHz in 1-Line mode, with a cooling fan and 923 g body. MV-CL162-B0F2C uses smaller 3.5 µm pixels in a 16384 × 2 color arrangement and reaches 130 kHz for Bayer BRGG 8 in 2 Link mode.
Specifications
| Product type | 16384 px Fiber Line Scan Camera |
| Sensor type | CMOS |
| Resolution | 16384 × 12 |
| Pixel size | 5 μm × 5 μm |
| Mono color | Color |
| Dynamic range | 62.6 dB |
| Exposure time | 3 μs to 10 ms |
| Gain | 1.0 ×, 1.3 ×, 2.0 ×, 4.0 × |
| Data interface | 2LC fiber connector |
| Digital I/O | Not supported |
| Lens mount | M90*1.0, flange back length 12 mm, applicable to F-mount via lens adapter |
| Power supply | 24 VDC |
| Power consumption | Typ. 23.8 W @ 24 VDC |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Operating temperature | –20 °C to 50 °C (–4 °F to 122 °F) |
| Storage temperature | –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 5% RH to 90% RH (no condensation) |
| Dimensions | 99 mm × 99 mm × 81.7 mm (3.9″ × 3.9″ × 3.2″) |
| Weight | Approx. 870 g (1.9 lb.) |
| Certification | CE-EMC, KC |
| Compatibility | XoFLink, GenICam |
| Max line rate | 40 kHz |
| Line length | 16384 |
| Scan type | 1-Line, 2-TDI, 4-TDI |
Selection and applications
16384-pixel 4-TDI color scanning. Wide color surface inspection. 2LC fiber capture at 40 kHz.
Minimum kit: Install MV-CL166-B0F2C with an M90*1.0 lens or adapted F-mount lens, a cable for the 2LC fiber connector, and a 24 VDC supply sized for 23.8 W typical draw.
Nearby in the range: MV-CL166-B0F2C-BASE — Prefer it for a 16384 × 6 color array with 1-Line and 2-TDI modes.; MV-CL166-91F2C — Prefer it when 3-TDI and a 47.3 kHz 1-Line maximum are required.; MV-CL162-B0F2C — Prefer it for a 16384 × 2 color sensor with format-dependent two-link rates..
Cables and accessories for this model
Compatibility per manufacturer data.
- Power
- Power
- Mounting
- Camera mounts
FAQ
Which TDI choices are built into the MV-CL166-B0F2C color sensor?
The 16384 × 12 CMOS device supports 1-Line, 2-TDI and 4-TDI acquisition. Its stated maximum line rate is 40 kHz, and image transmission is through a 2LC fiber connector.
How is power delivered to the MV-CL166-B0F2C camera body?
This variant requires a 24 VDC supply and has typical power consumption of 23.8 W at 24 VDC. The image path is separate and uses the camera's 2LC fiber connector.
Does MV-CL166-B0F2C provide external digital I/O lines?
Digital I/O is explicitly not supported. A station using this camera must therefore base its image transfer on the 2LC fiber connection without assuming configurable camera input or output lines.
What optic mount is specified for the wide MV-CL166-B0F2C line?
The native mount is M90*1.0 with a 12 mm flange-back distance. An F-mount optic is supported through an adapter, and its image coverage must suit the 16384-pixel line of 5 µm pixels.
How does MV-CL166-B0F2C differ from its BASE variant?
MV-CL166-B0F2C uses a 16384 × 12 arrangement and adds 4-TDI, while MV-CL166-B0F2C-BASE uses 16384 × 6 and stops at 2-TDI. Both have a 2LC fiber connector and the same listed body dimensions.