Line scan camera · CL Series
Hikrobot MV-CL086-91CC
- Warranty
- 36 months
Color line scanning and range position
Color capture across an 8192-pixel line is the defining capability of MV-CL086-91CC. Its CMOS sensor uses 5 µm pixels and an 8192 × 6 arrangement, with 1-line and 2-TDI acquisition. Camera Link operation reaches 10.1 kHz in Base, 20.2 kHz in Medium and 33.7 kHz in 80-bit mode. This combination suits color inspection where a moving target is assembled line by line and the transport mode can be chosen around the required line rate.
Exposure can be set from 3 µs to 10 ms, while the listed gain steps extend from 1.2 × to 6.2 × and dynamic range is 62 dB. Four configurable input/output lines on the 12-pin P10 connection support single-ended or differential wiring, and Camera Link adds CC1 through CC4. The M72*0.75 mount has a 12 mm flange back and can accept an F-mount lens through an adapter. Operation is rated from –20 °C to 55 °C with IP40 protection after correct lens installation and wiring.
Within the color line-scan group, MV-CL086-91CC is the compact 8192 × 6 Camera Link choice. MV-CL086-91CC-PRO extends the sensor arrangement to 8192 × 12, adds 4-TDI and reaches 34 kHz in 80-bit mode, but it uses 24 VDC and a deeper 89 mm body. MV-CL086-91GC instead carries the same 8192 × 6 format over Gigabit Ethernet and offers a 40 kHz high-bandwidth mode. MV-CL086-B0F1C combines 8192 × 12 capture with an LC fiber interface and 40 kHz operation in every image mode.
Specifications
| Product type | 8192 px Camera Link Line Scan Camera |
| Sensor type | CMOS |
| Resolution | 8192 × 6 |
| Pixel size | 5 μm |
| Mono color | Color |
| Dynamic range | 62 dB |
| Exposure time | 3 μs to 10 ms |
| Gain | Supports 1.2 ×, 2.7 ×, 3.0 ×, 3.5 ×, 4.6 ×, 6.2 × |
| Data interface | Camera Link (SDR connector); USB interface for updating firmware |
| Digital I/O | 12-pin P10 connector provides power and I/O: configurable input and output × 4 (Line 0/1/3/4), and support single-end/differential. Camera Link provides I/O (CC1/CC2/CC3/CC4). |
| Lens mount | M72*0.75, flange back length 12 mm, applicable to F-mount via lens adapter |
| Power supply | 12 VDC to 24 VDC |
| Power consumption | Typ. 9.6 W @ 12 VDC |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Operating temperature | –20 °C to 55 °C (–4 °F to 131 °F) |
| Storage temperature | –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 5% RH to 90% RH (no condensation) |
| Dimensions | 84 mm × 84 mm × 46.2 mm (3.3″ × 3.3″ × 1.8″) |
| Weight | Approx. 476 g (1.0 lb.) |
| Certification | CE-EMC, KC |
| Compatibility | Camera Link V1.2, GenICam |
| Max line rate | 10.1 kHz (Base), 20.2 kHz (Medium), 33.7 kHz (80-bit) |
| Line length | 8192 |
| Scan type | Supports 1-line, 2-TDI |
Selection and applications
8192-pixel color web inspection. 2-TDI color line acquisition. Camera Link surface capture.
Minimum kit: Use the MV-CL086-91CC camera, an M72*0.75 lens or an F-mount lens with the stated adapter, a Camera Link SDR cable, and a 12 VDC to 24 VDC supply through the 12-pin P10 connection.
Nearby in the range: MV-CL086-91CC-PRO — Choose it for an 8192 × 12 color sensor arrangement and 4-TDI acquisition over Camera Link.; MV-CL086-91GC — Choose it when Gigabit Ethernet transport and its 40 kHz high-bandwidth mode are required.; MV-CL086-B0F1C — Choose it for LC fiber transport with 40 kHz operation across all image modes..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- Camera Link
- I/O & power cables
- 12-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
Which lens mount and optical adapter arrangement does MV-CL086-91CC use?
The native mount is M72*0.75 with a 12 mm flange-back distance. An F-mount lens can be fitted through the stated lens adapter, so the optical selection must cover the 8192-pixel line while preserving that mechanical spacing.
How does Camera Link mode affect the available line rate on this camera?
The maximum rate depends directly on the Camera Link configuration: 10.1 kHz in Base, 20.2 kHz in Medium and 33.7 kHz in 80-bit mode. The selected link mode therefore has to match the intended acquisition rate.
What acquisition modes are available for color line capture with MV-CL086-91CC?
The 8192 × 6 color CMOS device supports both 1-line and 2-TDI scanning. Exposure is adjustable from 3 µs to 10 ms, giving the integration control needed to coordinate line acquisition with target motion and illumination.
What power and control wiring is required for the MV-CL086-91CC body?
Supply the camera with 12 VDC to 24 VDC through the 12-pin P10 connection; typical consumption is 9.6 W at 12 VDC. That connector also exposes four configurable inputs or outputs, with single-ended and differential operation supported.
What environmental limits apply when installing MV-CL086-91CC?
The operating range is –20 °C to 55 °C and the storage range is –30 °C to 80 °C. IP40 applies when the lens and wiring are installed correctly, while permitted humidity is 5% RH to 90% RH without condensation.