Line scan camera · CL Series
Hikrobot MV-CL162-B0F2C
- Warranty
- 36 months
Color format, fiber links and throughput
Two-link fiber throughput makes MV-CL162-B0F2C the color 16384-pixel member with format-dependent rates. The 16384 × 2 CMOS line uses 3.5 µm × 3.5 µm pixels and a 2LC connector. In 1 Link mode it ranges from 24.4 kHz for RGB 8/BGR 8 to 73.2 kHz for Bayer BRGG 8; 2 Link mode reaches 49.3 kHz for RGB 8/BGR 8, 65 kHz for Mono or Bayer RG formats, and 130 kHz for Bayer BRGG 8.
The camera uses 1-Line acquisition, with exposure from 3 µs to 10 ms, gains of 1.0 × and 2.0 ×, and 63.8 dB dynamic range. Digital I/O is not supported. A 12-pin P10 connector accepts 12 VDC to 24 VDC, while typical consumption is 15.8 W at 12 VDC. The M72*0.75 optical mount has a 12 mm flange back and can take an F-mount lens through an adapter. IP40 protection applies with correct lens installation and wiring.
This is the only 16384 × 2 color model in the group. MV-CL162-B0F2M uses the same resolution, pixel pitch and 2LC fiber connector for monochrome 1-Line and 2-TDI capture; its maximum line rate is 105 kHz. MV-CL166-B0F2C provides a deeper 16384 × 12 color sensor, supports 1-Line through 4-TDI operation and lists a 40 kHz maximum, using an M90*1.0 mount. MV-CL086-B0F1C shortens the color line to 8192 pixels and uses a single LC interface at 40 kHz in all modes.
Specifications
| Product type | 16384 px Fiber Line Scan Camera |
| Sensor type | CMOS |
| Resolution | 16384 × 2 |
| Pixel size | 3.5 μm × 3.5 μm |
| Mono color | Color |
| Dynamic range | 63.8 dB |
| Exposure time | 3 μs to 10 ms |
| Gain | 1.0 ×, 2.0 × |
| Data interface | 2LC fiber connector |
| Digital I/O | Not supported |
| Lens mount | M72*0.75, flange back length 12 mm, applicable to F-mount via lens adapter |
| Power supply | 12 VDC to 24 VDC (12-pin P10 connector) |
| Power consumption | Typ. 15.8 W @ 12 VDC |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Operating temperature | –20 °C to 50 °C (–4 °F to 122 °F) |
| Storage temperature | –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 5% RH to 90% RH (no condensation) |
| Dimensions | 132 mm × 76 mm × 55.5 mm (5.2″ × 3.0″ × 2.2″) |
| Weight | Approx. 600 g (1.3 lb.) |
| Certification | CE-EMC, KC |
| Compatibility | XoFLink, GenICam |
| Max line rate | 1 Link mode: 24.4 kHz @ RGB 8/BGR 8, 65 kHz @ Mono 8 & Bayer RG 8, 58.5 kHz @ Mono 10 & Bayer RG 10, 48.8 kHz @ Mono 12 & Bayer RG 12, 73.2 kHz @ Bayer BRGG 8 2 Link mode: 49.3 kHz @ RGB 8/BGR 8, 65 kHz @ Mono 8/10/12 & Bayer RG 8/10/12, 130 kHz @ Bayer BRGG 8 |
| Line length | 16384 |
| Scan type | 1-Line |
Selection and applications
16384-pixel color fiber inspection. Two-link Bayer line acquisition. Color surface scanning at 130 kHz.
Minimum kit: Combine MV-CL162-B0F2C with an M72*0.75 lens or adapted F-mount optic, a cable for the 2LC fiber connector, and a 12 VDC to 24 VDC source through the 12-pin P10 connection.
Nearby in the range: MV-CL162-B0F2M — Select it for monochrome 16384 × 2 capture with 1-Line and 2-TDI modes.; MV-CL166-B0F2C — Select it for a 16384 × 12 color arrangement with modes through 4-TDI.; MV-CL086-B0F1C — Select it when 8192 × 12 color capture over a single LC interface is sufficient..
Cables and accessories for this model
Compatibility per manufacturer data.
- Power
- Power
- Mounting
- Camera mounts
FAQ
Why does MV-CL162-B0F2C line rate depend on the selected pixel format?
The published rates vary by both link count and format. In 2 Link mode, RGB 8/BGR 8 reaches 49.3 kHz, Mono and Bayer RG formats reach 65 kHz, and Bayer BRGG 8 reaches 130 kHz.
What does 1 Link mode provide on the MV-CL162-B0F2C camera?
With 1 Link, the camera lists 24.4 kHz for RGB 8/BGR 8, 65 kHz for Mono 8 and Bayer RG 8, 58.5 kHz for Mono 10 and Bayer RG 10, and 48.8 kHz for Mono 12 and Bayer RG 12.
Are configurable digital signals available on MV-CL162-B0F2C?
No digital I/O is supported on this model. Its 2LC connector carries the fiber image path, while the 12-pin P10 connection is identified for the 12 VDC to 24 VDC power input.
Which lens connection covers the MV-CL162-B0F2C sensor line?
The camera uses an M72*0.75 mount with a 12 mm flange back and supports an F-mount lens by adapter. The optic must cover a 16384-pixel line built from 3.5 µm × 3.5 µm pixels.
What operating conditions apply to the MV-CL162-B0F2C body?
Operation is rated from –20 °C to 50 °C and humidity from 5% RH to 90% RH without condensation. The 132 mm × 76 mm × 55.5 mm body weighs about 600 g and is rated IP40 after correct installation.