Area camera · CS Series
Hikrobot MV-CS050-20GM V2.0
- Warranty
- 36 months
Horizontal detail for mono inspection
Horizontal detail extends to 2592 pixels in the 5.3 MP mono configuration of MV-CS050-20GM V2.0. An OnSemi XGS5000 global-shutter CMOS sensor delivers 2592 × 2048 at 22.7 fps through Gigabit Ethernet. The 2/3-inch device uses 3.2 µm pixels, with 66 dB dynamic range and exposure divided between UltraShort and standard ranges.
This wider mono frame supports gauging across broad parts, locating several edges in one view and verifying multi-position assemblies. Global shutter acquisition keeps moving geometry on one time base; settings from 23 µs to 99 µs provide the shortest exposures. One isolated input can receive the trigger, one isolated output can coordinate lighting, and PoE can power the 29 mm × 29 mm × 42 mm camera remotely.
MV-CS050-20GC V2.0 is the color version of the same XGS5000 platform, matching its 2592 × 2048 frame and 22.7 fps. MV-CS050-10GM-PRO reduces width to 2448 pixels, uses Sony® IMX264 and reaches 24.2 fps with exposure down to 1 µs. MV-CS050-60GM V5.0 also uses 2448 × 2048, but its Stacked BSI sensor operates at 24.4 fps and provides high full well capacity and high sensitivity modes.
Specifications
| Product type | 5.3 MP GigE Area Scan Camera |
| Sensor type | CMOS, global shutter |
| Sensor model | OnSemi XGS5000 |
| Sensor format | 2/3″ |
| Resolution | 2592 × 2048 |
| Pixel size | 3.2 μm × 3.2 μm |
| Maximum frame rate | 22.7 fps @ 2592 × 2048 |
| Mono color | Mono |
| Dynamic range | 66 dB |
| Exposure time | UltraShort exposure mode: 23 μs to 99 μs Standard exposure mode: 100 μs to 10 sec |
| Gain | 0 dB to 18 dB |
| Data interface | Gigabit Ethernet, compatible with Fast Ethernet |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Lens mount | C-mount |
| Power supply | 9 VDC to 24 VDC, supports PoE |
| Power consumption | Typ. 2.5 W @ 12 VDC |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Operating temperature | –30 °C to 60 °C (–22 °F to 140 °F) |
| Storage temperature | –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| Dimensions | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.2″) |
| Weight | Approx. 100 g (0.22 lb.) |
| Certification | CE-EMC, KC, CE-LVD, UL |
| Compatibility | GigE Vision V2.0, GenICam |
Selection and applications
Wide-frame mono dimensional gauging. Multiple-edge localisation. Triggered assembly-position verification.
Minimum kit: Use the MV-CS050-20GM V2.0 camera, a C-mount lens for the 2/3-inch sensor, a Gigabit Ethernet cable, and PoE or a 9 VDC to 24 VDC source.
Nearby in the range: MV-CS050-20GC V2.0 — Choose it when color is required with the same 2592 × 2048 XGS5000 platform.; MV-CS050-10GM-PRO — Choose it for a Sony® IMX264 mono sensor at 2448 × 2048 and 24.2 fps.; MV-CS050-60GM V5.0 — Choose it for Stacked BSI mono imaging with two sensor modes at 24.4 fps..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- GigE
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
How much mono image data does MV-CS050-20GM V2.0 capture?
The OnSemi XGS5000 records 2592 × 2048 at up to 22.7 fps. It is a 2/3-inch global-shutter CMOS sensor with 3.2 µm × 3.2 µm pixels, and the camera is identified as a 5.3 MP mono model.
What is the shortest timing range on MV-CS050-20GM V2.0?
Its UltraShort exposure mode spans 23 µs to 99 µs. Standard exposure covers 100 µs to 10 sec. A global shutter keeps the selected interval common to the entire 2592 × 2048 image.
Does MV-CS050-20GM V2.0 support PoE and direct DC input?
Both options are available: PoE through the Ethernet installation or a 9 VDC to 24 VDC supply. Typical consumption is 2.5 W at 12 VDC. The camera uses Gigabit Ethernet and accepts Fast Ethernet links.
How can MV-CS050-20GM V2.0 exchange trigger signals?
The 6-pin P7 connector presents one opto-isolated input, one opto-isolated output and one bidirectional non-isolated line. These points can link capture timing and a return event to the inspection machine.
Why choose MV-CS050-20GM V2.0 over MV-CS050-10GM-PRO?
MV-CS050-20GM V2.0 provides 2592 × 2048 from an OnSemi XGS5000 at 22.7 fps. MV-CS050-10GM-PRO provides 2448 × 2048 from a Sony® IMX264 at 24.2 fps and reaches a 1 µs UltraShort exposure.