Area camera · CS Series
Hikrobot MV-CS050-10GM-PRO
- Lead time
- from 5 days
- Warranty
- 36 months
Mono measurement and model choices
A 2448 × 2048 Mono 8 image from the Sony® IMX264 gives MV-CS050-10GM-PRO its measurement-oriented profile. The 2/3-inch global-shutter CMOS device has 3.45 µm pixels and operates at 24.2 fps over Gigabit Ethernet. Dynamic range is 72 dB, and exposure control extends from a 1 µs UltraShort interval to 10 sec in standard mode.
The mono signal suits edge location, dimensional gauging and presence detection where color separation is unnecessary. Global shutter timing limits geometric skew on moving parts, and the 1 µs exposure floor can work with brief illumination. Triggering and coordination use one opto-isolated input, one opto-isolated output and one bidirectional non-isolated line on the 6-pin P7 interface.
MV-CS050-10GC-PRO adds Bayer RG 8 color while retaining the IMX264, 2448 × 2048 frame and 24.2 fps GigE rate. MV-CS050-20GM V2.0 raises horizontal sampling to 2592 pixels through an OnSemi XGS5000, with 22.7 fps operation. For substantially higher rate at 5 MP, MV-CS050-60UM V5.0 supplies Mono 8 at 60 fps over USB 3.0 from a Stacked BSI sensor.
Specifications
| Shutter | global |
| Sensor model | Sony® IMX264 |
| Nominal optical sensor format | 2/3″ |
| Sensor resolution | 2448×2048 px |
| Maximum frame rate | 24.2 fps @ resolution 2448×2048 px; 35.6 fps @ image compression, resolution 2448×2048 px |
| Color mode | mono |
| Lens mount | C-mount |
| Data interface | GigE (Fast Ethernet compatible) |
| Sensor technology | CMOS |
| Pixel size | 3.45×3.45 µm |
| Dynamic range | 72 dB |
| Signal-to-noise ratio | 40 dB |
| Exposure time | 1…14 µs @ ultra-short exposure mode; 15…10000000 µs @ standard exposure mode |
| Auto exposure | Off, Once, Continuous |
| Gain | 0…24 dB |
| Pixel format | Mono8, Mono10, Mono10p, Mono12, Mono12p |
| Binning | 1x1, 2x2, 4x4 |
| Decimation | 1x1, 2x2 |
| Protocol compatibility | GigE Vision, GenICam |
| Communication protocol versions | GigE Vision 2.0 |
| Third party software protocol | GigE Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital I/O connector | Hirose 6-pin |
| Power supply | 9…24 V |
| Power delivery | external power supply, PoE |
| PoE support | yes |
| Power consumption | 2.6 W (typical) @ DC, supply voltage 12 V |
| Ingress protection | IP40 @ with lens and cables properly installed |
| Working temperature | -30…60 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 29×29×42 mm |
| Weight | 100 g (approx.) |
| Certification | CE, RoHS, KC |
| Reverse image | horizontal, vertical |
Engineering data for this model
Calculated by the MVisionPro engineering tools from the passport data of this model for typical tasks. The figures are estimates for preliminary selection.
Engineering conclusion: 20 mm at 300 mm WD gives a 118.24 mm field, so a 100 mm object fits geometrically. The confirmed mode 2448 × 2048 px · 24.2 fps · Mono8 gives a raw stream of 0.971 Gbit/s over GigE, which fits one link.
Note: Spatial sampling is an engineering estimate; confirm measurement performance by calibration and verify the selected lens installation.
Field of view with a standard lens
| Task | Standard lens | Field of view at the task distance | Distance for the exact field |
|---|---|---|---|
| 100 mm object at 300 mm | 20 mm | 118.24 mm | 256.81 mm |
| 200 mm object at 500 mm | 20 mm | 202.69 mm | 493.62 mm |
Resolution on the object
| Requested field of view | Sampling density | Object pixel | Minimum defect (5 px) |
|---|---|---|---|
| 100 mm | 24.48 px/mm | 40.85 µm/px | 0.2042 mm |
| 200 mm | 12.24 px/mm | 81.7 µm/px | 0.4085 mm |
Depth of field and motion
| Requested field of view | Depth of field | Exposure limit (1 px blur) |
|---|---|---|
| 100 mm | 8.39 mm at f/4 | 81.7 µs at 500 mm/s |
| 200 mm | 32.26 mm at f/4 | 81.7 µs at 1000 mm/s |
Data stream by interface
| Confirmed mode | Passport condition | Interface | Raw stream per camera |
|---|---|---|---|
| 2448 × 2048 px · 24.2 fps · Mono8 | 24.2 fps @ 2448 × 2048 Mono 8 | GigE | 0.971 Gbit/s |
Compatible lenses and cables
| Type | Model | What was checked |
|---|---|---|
| Lens | MVL-KF1228M-12MP | Mount, sensor coverage and the optical task of the scenario |
| Lens | MVL-KF1628M-12MP | Mount, sensor coverage and the optical task of the scenario |
| Lens | MVL-KF1628M-12MPE | Mount, sensor coverage and the optical task of the scenario |
| Lens | MVL-MF1228M-10MPE | Mount, sensor coverage and the optical task of the scenario |
| Lens | MVL-MF1228M-8MP | Mount, sensor coverage and the optical task of the scenario |
| Cable | MV-ACC-01-1101-5m | Data role, interface family, connector path and 5 m length |
| Cable | MV-ACG-RJ45s(up)-RJ45-HF-5m | Data role, interface family, connector path and 5 m length |
| Cable | MV-ACG-RJ45s(up)-RJ45-ST-5m | Data role, interface family, connector path and 5 m length |
| Cable | MV-ACG-RJ45s-RJ45-HF-5m | Data role, interface family, connector path and 5 m length |
How these figures were calculated
- Assumption: Thin-lens approximation; working distance is measured from the principal plane.
- Assumption: The primary optical calculation uses the sensor width and field-of-view width.
- Assumption: The standard focal length is selected downward and its actual field of view is checked.
- Assumption: Object-space resolution is calculated independently for each requested axis.
- Assumption: Motion speed is constant along the selected motion axis.
- Assumption: Depth of field uses a two-pixel circle of confusion.
- Assumption: Stream bandwidth uses the confirmed wire bits per pixel before protocol overhead.
- Assumption: A selected camera is checked only against its passport interface profile.
- Warning: The passport frame rate is tied to the stated mode conditions.
Engineering tools
Configure a kit · Check interface · Calculate optics for this camera
Guide: Choosing a lens when the working distance is fixed · Exposure, motion blur and strobe
Selection and applications
Mono edge and dimension gauging. Presence inspection of moving parts. Short-pulse triggered image capture.
Minimum kit: Use the MV-CS050-10GM-PRO camera, a C-mount lens for the 2/3-inch sensor, a Gigabit Ethernet cable, and PoE or a 9 VDC to 24 VDC source.
Nearby in the range: MV-CS050-10GC-PRO — Choose it when Bayer RG 8 color data is needed from the same Sony® IMX264; MV-CS050-20GM V2.0 — Choose it for a 2592 × 2048 Mono frame from the OnSemi XGS5000; MV-CS050-60UM V5.0 — Choose it for 2448 × 2048 Mono 8 acquisition at 60 fps over USB 3.0.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- GigE
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What type of measurement stream comes from MV-CS050-10GM-PRO?
Its full-frame output is 2448 × 2048 Mono 8 at up to 24.2 fps. A Sony® IMX264 global-shutter CMOS sensor supplies the image from a 2/3-inch format with 3.45 µm × 3.45 µm pixels.
How does MV-CS050-10GM-PRO handle very short exposures?
The UltraShort range is 1 µs to 14 µs; standard exposure begins at 15 µs and extends to 10 sec. Global shutter operation applies one exposure interval across the frame, supporting timed capture of moving geometry.
Can one Ethernet run carry MV-CS050-10GM-PRO data and power?
Yes, PoE is supported by the Gigabit Ethernet camera. It also accepts 9 VDC to 24 VDC through the power interface. Typical consumption is 2.6 W at 12 VDC, and Fast Ethernet connection compatibility is listed.
Which lens interface is fitted to the MV-CS050-10GM-PRO housing?
The camera uses C-mount for its 2/3-inch sensor. A selected lens should cover that format and support 3.45 µm sampling across 2448 × 2048 pixels, with focal length set by the scene width and working distance.
When is MV-CS050-10GC-PRO the closer variant to choose instead?
Select MV-CS050-10GC-PRO when Bayer RG 8 color information is part of the inspection. It matches MV-CS050-10GM-PRO in Sony® IMX264 sensor, 2448 × 2048 resolution and 24.2 fps maximum rate.