Area camera · CS Series
Hikrobot MV-CS050-60GN
- Lead time
- from 5 days
- Warranty
- 36 months
Near-IR inspection and range position
Near IR response separates MV-CS050-60GN from the color and mono-output variants around it. A 2/3-inch Stacked BSI global-shutter CMOS sensor provides 2448 × 2048 Mono 8 frames at 23 fps through 1000 Mbit/s Ethernet. The 3.45 µm pixels, 73.9 dB dynamic range and 5 µs high-sensitivity exposure limit define a 5 MP network camera for near-infrared image formation.
The camera fits presence, contrast and feature checks where near-infrared illumination provides the required separation. Global shutter timing supports moving material, while the high full well capacity range begins at 30 µs and both exposure paths extend to 10 sec. A P7 input can trigger capture, and PoE can carry power on the same Ethernet route as the image data.
MV-CS050-60GM V2.0 supplies Mono 8 output at the same 2448 × 2048 and 23 fps, with a single 5 µs to 10 sec exposure range. MV-CS050-60GM V5.0 raises the Mono 8 rate to 24.4 fps and lists both high full well capacity and high sensitivity modes. MV-CS050-90GM changes the sensor to GMAX3405, operates at 24.2 fps and offers UltraShort exposure from 2 µs to 4 µs.
Available versions
One device, different revisions. We ship the current one by default; if a specific revision is already installed on your line, name it in the request and we will match it.
| Part number | PN | Version | |
|---|---|---|---|
| MV-CS050-60GN | 306302728 | — | |
| MV-CS050-60GN V5.0 | 306303956 | V5.0 |
Specifications
| Shutter | global |
| Nominal optical sensor format | 2/3″ |
| Sensor resolution | 2448×2048 px |
| Color mode | mono1 |
| Lens mount | C-mount |
| Data interface | GigE (Fast Ethernet compatible) |
| Pixel size | 3.45×3.45 µm |
| Dynamic range | 73.9 dB |
| Signal-to-noise ratio | 42.4 dB |
| Exposure time | 30…10000000 µs @ high full well capacity; 5…10000000 µs @ high sensitivity |
| Pixel format | Mono8, Mono10, Mono10Packed, Mono12, Mono12Packed |
| Binning | 1x1, 2x2, 4x4 |
| Decimation | 1x1, 2x2, 4x4 |
| Protocol compatibility | GigE Vision, GenICam |
| Communication protocol versions | GigE Vision 2.0 |
| Third party software protocol | GigE Vision |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital input count | 1 |
| Digital output count | 1 |
| Digital I/O connector | P7 6-pin |
| Power supply | 9…24 V |
| Power delivery | external power supply, PoE |
| PoE support | yes |
| Ingress protection | IP40 @ with lens and cables properly installed |
| Working temperature | -30…60 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 29×29×42 mm |
| Weight | 100 g (approx.) |
| Certification | CE, RoHS, KC |
| Spectral domain | NIR |
| Reverse image | horizontal, vertical |
| Part number | Maximum frame rate | Sensor technology | Auto exposure | Client software | Power consumption |
|---|---|---|---|---|---|
MV-CS050-60GN V5.0All specifications
| 24.4 fps @ Mono8, resolution 2448×2048 px | CMOS; stacked BSI | Auto, Off, Once | MVS, third-party GigE Vision software | 1.4 W (typical) @ DC, supply voltage 12 V |
MV-CS050-60GNAll specifications
| 23 fps @ Mono8, resolution 2448×2048 px | CMOS, stacked BSI | Off, Once, Continuous | MVS | 2.3 W (typical) @ DC, supply voltage 12 V |
1 not stated for all variants
Documents
Selection and applications
Near-infrared presence inspection. NIR contrast and feature checks. Triggered imaging of moving material.
Minimum kit: Use the MV-CS050-60GN camera, a C-mount lens for its 2/3-inch sensor, a Gigabit Ethernet cable, and PoE or a 9 VDC to 24 VDC source.
Nearby in the range: MV-CS050-60GM V2.0 — Choose it for Mono 8 output at 2448 × 2048 and 23 fps; MV-CS050-60GM V5.0 — Choose it for Mono 8 imaging with two sensor modes at 24.4 fps; MV-CS050-90GM — Choose it for a GMAX3405 mono sensor and UltraShort exposure from 2 µs to 4 µs.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- GigE
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What spectral variant is represented by the MV-CS050-60GN designation?
The camera is identified as Near IR and outputs 2448 × 2048 Mono 8 at up to 23 fps. Its imager is a 2/3-inch Stacked BSI global-shutter CMOS sensor with 3.45 µm × 3.45 µm pixels.
Which exposure modes are provided by the near-IR MV-CS050-60GN?
High full well capacity exposure covers 30 µs to 10 sec, while high sensitivity covers 5 µs to 10 sec. Gain spans 0 dB to 24 dB, and the stated dynamic range is 73.9 dB.
Can MV-CS050-60GN be powered through its Ethernet cable?
Yes, the camera supports PoE and also accepts 9 VDC to 24 VDC. Typical consumption is 2.3 W at 12 VDC. The link operates at 1000 Mbit/s and can connect at 100 Mbit/s.
What control I/O is available for triggering MV-CS050-60GN?
The 6-pin P7 connector provides one opto-isolated input, one opto-isolated output and one bidirectional non-isolated line. These signals can connect acquisition timing and associated illumination control.
How does MV-CS050-60GN differ from MV-CS050-60GM V2.0?
Both cameras use a 2/3-inch Stacked BSI global shutter and record 2448 × 2048 Mono 8 at 23 fps. MV-CS050-60GN is the Near IR variant and includes high full well capacity and high sensitivity exposure ranges.