Hikrobot MV-CT0CU0032/G

BASE version: what you get

This camera comes in three versions on the same sensor — they differ in protection, connectors and integrated optics:

• Type-C interface
• IP40 (under proper lens installation and wiring)
• Control interface not supported

Same sensor, other versions:

Same version, other sensor variant:

Inspection tasks and range position

Three-megapixel-class colour imaging at 104.8 fps establishes this model’s role. MV-CT0CU0032/G combines a Stacked BSI CMOS sensor, global shutter, 2048 × 1536 px colour output and 104.8 fps. Its 3.45 × 3.45 µm pixels occupy a 1/1.8-inch sensor, while USB 3.0 carries the image stream through the Type-C interface.

The global shutter and 104.8 fps ceiling support high-cadence assembly checks, colour classification and feature localisation, with the full field exposed on the same timing basis. Exposure extends through 30 µs to 10 s in High Full Well Capacity mode and 5 µs to 10 s in High Sensitivity mode. Trigger Width and Trigger Controlled modes allow exposure to follow external timing. The 29 mm × 29 mm × 30 mm (1.1" × 1.1" × 1.2") body accepts C-mount optics. IP40 protection applies with proper lens installation and wiring, and the working range is –30 °C to 60 °C (–22 °F to 140 °F).

Neighbouring cameras show where this combination should be retained. MV-CT0CG0032/G uses Gigabit Ethernet for 2048 × 1536 px colour capture at 39 fps. MV-CT0MG0032/G uses Gigabit Ethernet for 2048 × 1536 px monochrome capture at 39 fps. MV-CT0CU0050/G provides 2448 × 2048 px at 80 fps with a global-shutter colour path over USB 3.0. Retain MV-CT0CU0032/G when Color output, Type-C USB 3.0 and USB power are needed together at 104.8 fps.

Specifications

Selection and applications

Colour feature capture at 2048 × 1536 px. Triggered colour inspection with a global shutter. Full-frame acquisition up to 104.8 fps.

Minimum kit: Use MV-CT0CU0032/G with a C-mount lens, a USB 3.0 cable to the Type-C interface, and either USB bus power or 9 V DC to 24 V DC power through the 8-pin M8 A-Code connection.

Nearby in the range: MV-CT0CG0032/G — Prefer it for Gigabit Ethernet transport at 2048 × 1536 px and 39 fps.; MV-CT0MG0032/G — Prefer it for Mono output over Gigabit Ethernet at 2048 × 1536 px and 39 fps.; MV-CT0CU0050/G — Prefer it for 2448 × 2048 px, 80 fps and global-shutter colour capture..

Compatible lens options

• MVL-KF1628M-12MP — C-mount mount; Ø17.6 mm image circle fully covers the 1/1.8 sensor; 12 MP optical class — headroom for this camera
• MVL-KF5024M-25MP — C-mount mount; Ø19.3 mm image circle fully covers the 1/1.8 sensor; 25 MP optical class — headroom for this camera

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables

CT: USB Type-CUSB 3.0

I/O & power cables

CT: power and I/O

Power

Power

Mounting

Camera mounts

All accessory families →

FAQ

Which suggested lenses cover the sensor in MV-CT0CU0032/G?

For MV-CT0CU0032/G, the C-mount matches are MVL-KF1628M-12MP and MVL-KF5024M-25MP. Their image circles cover the 1/1.8-inch sensor, and the 12 MP and 25 MP lens classes are above the camera’s 2048 × 1536 px matrix. Both therefore match the stated mount, sensor coverage and resolution requirement.

How should power and cabling be arranged for MV-CT0CU0032/G?

The Type-C USB 3.0 connection supports bus power, while the camera also accepts 9 V DC to 24 V DC. The 8-pin M8 A-Code connection provides power and I/O for externally powered wiring. Consumption is typically 1.6 W at 5 V DC (USB 3.0 provides power supply).

What data interface and peak acquisition rate does MV-CT0CU0032/G provide?

Data uses USB 3.0 through the Type-C interface and is compatible with USB 2.0. The stated full-frame ceiling is 104.8 fps at 2048 × 1536 Bayer GR 8. MVS and software meeting the USB3 Vision protocol are supported for acquisition.

How do shutter timing and exposure affect motion work with MV-CT0CU0032/G?

The CMOS sensor uses a global shutter, so all pixels share the exposure timing for moving-part capture. Full-frame rate is 104.8 fps, and the exposure range is 30 µs to 10 s in High Full Well Capacity mode and 5 µs to 10 s in High Sensitivity mode. Trigger Width and Trigger Controlled operation are available.

Which image-reduction and I/O functions are available on MV-CT0CU0032/G?

Binning and decimation each support 1 × 1, 2 × 2 and 4 × 4 operation. Horizontal and vertical reverse-image output is available. The 8-pin M8 A-Code I/O provides one opto-isolated input, one opto-isolated output and one bidirectional non-isolated line for sequencing.

What enclosure conditions and temperature range apply to MV-CT0CU0032/G?

Operation is rated from –30 °C to 60 °C (–22 °F to 140 °F), with 20% RH to 95% RH (no condensation). The housing is 29 mm × 29 mm × 30 mm (1.1" × 1.1" × 1.2") and weighs approximately 72 g (0.2 lb.). Its IP40 rating applies under proper lens installation and wiring, so the station must provide conditions consistent with that protection level.