Area camera · CT series
Hikrobot MV-CT0CU0200/R
- Lead time
- from 5 days
- Warranty
- 36 months
BASE version: what you get
Same version, other sensor variant:
Applications and neighbours
Maximum pixel count in the USB branch is the primary reason to consider this colour model. At its centre, MV-CT0CU0200/R records 5472 × 3648 px colour frames at up to 19.3 fps. The Sony IMX183 CMOS device has 2.4 × 2.4 µm pixels on a 1-inch format and uses a rolling shutter. Transport is USB 3.0 through the Type-C interface.
The rolling shutter directs MV-CT0CU0200/R toward stationary high-detail inspection, indexed surface review and large-frame colour capture, where motion during sensor readout can be controlled. Exposure extends through 14 µs to 0.86 s. Trigger Width and Trigger Controlled modes allow exposure to follow external timing. The 29 mm × 29 mm × 30 mm (1.1" × 1.1" × 1.2") body accepts C-mount optics. IP40 protection applies with proper lens installation and wiring, and the working range is –30 °C to 60 °C (–22 °F to 140 °F).
Within the 20 MP group, this model exchanges Gigabit Ethernet and PoE for USB 3.0 and USB power. MV-CT0CG0200/R uses Gigabit Ethernet for 5472 × 3648 px colour capture at 5.9 fps. MV-CT0MG0200/R uses Gigabit Ethernet for 5472 × 3648 px monochrome capture at 5.9 fps. MV-CT0CU0120/G provides 4096 × 3000 px at 31 fps with a global-shutter colour path over USB 3.0. Retain MV-CT0CU0200/R when Color output, Type-C USB 3.0 and USB power are needed together at 19.3 fps.
Specifications
| Shutter | rolling |
| Sensor model | Sony IMX183 |
| Nominal optical sensor format | 1″ |
| Sensor resolution | 5472×3648 px |
| Maximum frame rate | 19.3 fps @ BayerGB8, resolution 5472×3648 px |
| Color mode | color |
| Lens mount | C-mount |
| Data interface | USB 3.0 |
| Sensor technology | CMOS |
| Pixel size | 2.4×2.4 µm |
| Dynamic range | 66.1 dB |
| Signal-to-noise ratio | 41.3 dB |
| Exposure time | 14…860000 µs |
| Auto exposure | Off, Once, Continuous, trigger width, trigger controlled |
| Gain | 0…24 dB |
| Pixel format | Mono8, BayerGB8, BayerGB10, BayerGB10Packed, BayerGB12, BayerGB12Packed, YUV422_YUYV_Packed, YUV422Packed, RGB8, BGR8 |
| Binning | 1x1, 2x2, 4x4 |
| Decimation | 1x1, 2x2, 4x4 |
| Data interface connector | USB Type-C |
| USB 2.0 compatibility | yes |
| Control interface | not available |
| Protocol compatibility | USB3 Vision, GenICam |
| Third party software protocol | USB3 Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital I/O connector | M8 8-pin A-coded |
| Power supply | 9…24 V @ external power supply |
| Power delivery | external power supply, USB |
| Power consumption | 1.7 W (typical) @ USB, supply voltage 5 V |
| Ingress protection | IP40 @ with lens and cables properly installed |
| Working temperature | -30…60 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 29×29×30 mm |
| Weight | 72 g (approx.) |
| Certification | CE, RoHS, KC |
| Port inventory | USB 3.0 (data) |
| Reverse image | horizontal, vertical |
Documents
Selection and applications
Colour feature capture at 5472 × 3648 px. Stationary colour inspection with a rolling shutter. Full-frame acquisition up to 19.3 fps.
| Lenses | MVL-KF3524M-25MP, MVL-KF5024M-25MP |
|---|
Minimum kit: Use MV-CT0CU0200/R with a C-mount lens, a USB 3.0 cable to the Type-C interface, and either USB bus power or 9 V DC to 24 V DC power through the 8-pin M8 A-Code connection.
Nearby in the range: MV-CT0CG0200/R — Prefer it for Gigabit Ethernet transport at 5472 × 3648 px and 5.9 fps; MV-CT0MG0200/R — Prefer it for Mono output over Gigabit Ethernet at 5472 × 3648 px and 5.9 fps; MV-CT0CU0120/G — Prefer it for 4096 × 3000 px, 31 fps and global-shutter colour capture.
Compatible lens options
- MVL-KF3524M-25MP — C-mount mount; Ø19.3 mm image circle fully covers the 1″ sensor; 25 MP optical class — headroom for this camera
- MVL-KF5024M-25MP — C-mount mount; Ø19.3 mm image circle fully covers the 1″ sensor; 25 MP optical class — headroom for this camera
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- CT: USB Type-CUSB 3.0
- I/O & power cables
- CT: power and I/O
- Power
- Power
- Mounting
- Camera mounts
FAQ
Which suggested lenses cover the sensor in MV-CT0CU0200/R?
For MV-CT0CU0200/R, the C-mount matches are MVL-KF3524M-25MP and MVL-KF5024M-25MP. Their image circles cover the 1-inch sensor, and the 25 MP lens class is above the camera’s 5472 × 3648 px matrix. Both therefore match the stated mount, sensor coverage and resolution requirement.
How should power and cabling be arranged for MV-CT0CU0200/R?
The Type-C USB 3.0 connection supports bus power, while the camera also accepts 9 V DC to 24 V DC. The 8-pin M8 A-Code connection provides power and I/O for externally powered wiring. Consumption is typically 1.7 W at 5 V DC (USB 3.0 provides power supply).
What data interface and peak acquisition rate does MV-CT0CU0200/R provide?
Data uses USB 3.0 through the Type-C interface and is compatible with USB 2.0. The stated full-frame ceiling is 19.3 fps at 5472 × 3648 Bayer GB 8. MVS and software meeting the USB3 Vision protocol are supported for acquisition.
How do shutter timing and exposure affect motion work with MV-CT0CU0200/R?
This is a rolling-shutter CMOS camera, so stationary or strobed scenes suit geometry-sensitive work. It reaches 19.3 fps, with exposure from 14 µs to 0.86 s. Trigger Width and Trigger Controlled operation are supported.
Which image-reduction and I/O functions are available on MV-CT0CU0200/R?
Binning and decimation each support 1 × 1, 2 × 2 and 4 × 4 operation. Horizontal and vertical reverse-image output is available. The 8-pin M8 A-Code I/O provides one opto-isolated input, one opto-isolated output and one bidirectional non-isolated line for sequencing.
What enclosure conditions and temperature range apply to MV-CT0CU0200/R?
Operation is rated from –30 °C to 60 °C (–22 °F to 140 °F), with 20% RH to 95% RH (no condensation). The housing is 29 mm × 29 mm × 30 mm (1.1" × 1.1" × 1.2") and weighs approximately 72 g (0.2 lb.). Its IP40 rating applies under proper lens installation and wiring, so the station must provide conditions consistent with that protection level.