Hikrobot MV-CT0CG0200/R

BASE version: what you get

This camera comes in three versions on the same sensor — they differ in protection, connectors and integrated optics:

• RJ45 connector
• IP40 (under proper lens installation and wiring)
• Control interface not supported

Same sensor, other versions:

Same version, other sensor variant:

Where the configuration belongs

Twenty-megapixel colour acquisition is the starting point for this GigE configuration. At its centre, MV-CT0CG0200/R records 5472 × 3648 px colour frames at up to 5.9 fps. The Sony IMX183 CMOS device has 2.4 × 2.4 µm pixels on a 1-inch format and uses a rolling shutter. Transport is Gigabit Ethernet through the RJ45 connector.

The rolling shutter directs MV-CT0CG0200/R toward high-detail print review, stationary surface inspection and large-field colour analysis, where motion during sensor readout can be controlled. Exposure extends through 46 µs to 2.78 s. Trigger Width and Trigger Controlled modes allow exposure to follow external timing. The 29 mm × 29 mm × 42 mm (1.1" × 1.1" × 1.7") body accepts C-mount optics. IP40 protection applies with proper lens installation and wiring, and the working range is –30 °C to 60 °C (–22 °F to 140 °F).

Three nearby configurations frame its position in the series. MV-CT0MG0200/R keeps 5472 × 3648 px and 5.9 fps but changes the output to Mono. MV-CT0CU0200/R uses USB 3.0 for 5472 × 3648 px colour capture at 19.3 fps. MV-CT0CG0120/R provides 4096 × 3024 px at 9.9 fps with a rolling-shutter colour path over Gigabit Ethernet. Retain MV-CT0CG0200/R when Color output, Gigabit Ethernet and PoE are needed together at 5.9 fps.

Specifications

Selection and applications

Colour feature capture at 5472 × 3648 px. Stationary colour inspection with a rolling shutter. Full-frame acquisition up to 5.9 fps.

Minimum kit: Use MV-CT0CG0200/R with a C-mount lens, a Gigabit Ethernet cable to the RJ45 connector, and either PoE or 9 V DC to 24 V DC power through the 8-pin M8 A-Code connection.

Nearby in the range: MV-CT0MG0200/R — Prefer it for Mono output at the same 5472 × 3648 px and 5.9 fps.; MV-CT0CU0200/R — Prefer it for USB 3.0 transport at 5472 × 3648 px and 19.3 fps.; MV-CT0CG0120/R — Prefer it for 4096 × 3024 px, 9.9 fps and rolling-shutter colour capture..

Compatible lens options

• MVL-KF3524M-25MP — C-mount mount; Ø19.3 mm image circle fully covers the 1 sensor; 25 MP optical class — headroom for this camera
• MVL-KF5024M-25MP — C-mount mount; Ø19.3 mm image circle fully covers the 1 sensor; 25 MP optical class — headroom for this camera

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables

GigE

I/O & power cables

CT: power and I/O

Power

Power

Mounting

Camera mounts

All accessory families →

FAQ

Which suggested lenses cover the sensor in MV-CT0CG0200/R?

For MV-CT0CG0200/R, the C-mount matches are MVL-KF3524M-25MP and MVL-KF5024M-25MP. Their image circles cover the 1-inch sensor, and the 25 MP lens class is above the camera’s 5472 × 3648 px matrix. Both therefore match the stated mount, sensor coverage and resolution requirement.

How should power and cabling be arranged for MV-CT0CG0200/R?

The camera accepts 9 V DC to 24 V DC and also supports PoE. The RJ45 connector carries Gigabit Ethernet; the 8-pin M8 A-Code connection provides DC power and I/O when separate power is used. Consumption is typically 1.6 W at 12 V DC.

What data interface and peak acquisition rate does MV-CT0CG0200/R provide?

Data uses Gigabit Ethernet at 1 Gbit/s through RJ45 and remains compatible with Fast Ethernet. The stated full-frame ceiling is 5.9 fps at 5472 × 3648 Bayer GB 8. MVS and software meeting the GigE Vision protocol are supported.

How do shutter timing and exposure affect motion work with MV-CT0CG0200/R?

This is a rolling-shutter CMOS camera, so stationary or strobed scenes suit geometry-sensitive work. It reaches 5.9 fps, with exposure from 46 µs to 2.78 s. Rolling and Global Reset are supported. Trigger Width and Trigger Controlled operation are supported.

Which image-reduction and I/O functions are available on MV-CT0CG0200/R?

Binning and decimation each support 1 × 1, 2 × 2 and 4 × 4 operation. Horizontal and vertical reverse-image output is available. The 8-pin M8 A-Code I/O provides one opto-isolated input, one opto-isolated output and one bidirectional non-isolated line for sequencing.

What enclosure conditions and temperature range apply to MV-CT0CG0200/R?

Operation is rated from –30 °C to 60 °C (–22 °F to 140 °F), with 20% RH to 95% RH (no condensation). The housing is 29 mm × 29 mm × 42 mm (1.1" × 1.1" × 1.7") and weighs approximately 116 g (0.3 lb.). Its IP40 rating applies under proper lens installation and wiring, so the station must provide conditions consistent with that protection level.