Hikrobot MV-CU060-60GM

Monochrome applications and range context

Mono 8 output from a 3200 × 1944 BSI sensor gives MV-CU060-60GM a fine-pitch, monochrome imaging profile in a compact GigE package. Its 1/2.4-inch CMOS array uses 2 µm pixels, a rolling shutter, and a 19 fps full-frame rate. The 64 dB dynamic range, exposure range from 52 µs to 10 sec, and gain to 24 dB allow adjustment around controlled inspection lighting.

The camera fits stationary dimensional checks, fiducial location, fine mark inspection, and presence detection on indexed equipment. C-mount optics attach to a 29 mm × 29 mm face, while Gigabit Ethernet supports remote placement in the machine. Optional PoE or a 9 V DC to 24 V DC feed supplies the typical 1.6 W load; the P7 I/O provides isolated trigger and output channels plus one bidirectional line.

MV-CU060-60GC is the colour counterpart, retaining 3200 × 1944 and 19 fps but sending Bayer BG 8 data. MV-CU060-10GM keeps GigE and nearly the same rate at 19.1 fps, changing to a 1/1.8-inch Sony IMX178 and 3072 × 2048 sampling. MV-CU013-80UM sacrifices resolution at 1280 × 1024 in exchange for a global shutter and 240.4 fps through USB3.0.

Available versions

One device, different revisions. We ship the current one by default; if a specific revision is already installed on your line, name it in the request and we will match it.

Specifications

Selection and applications

Fine monochrome mark inspection. Indexed dimensional image capture. GigE fiducial and edge detection.

Minimum kit: The minimum setup is MV-CU060-60GM, a 1/2.4-inch-compatible C-mount lens, a Gigabit Ethernet cable, and optional PoE or a separate 9 V DC to 24 V DC supply.

Nearby in the range: MV-CU060-60GC — Prefer it when Bayer BG 8 colour is required at 3200 × 1944 and 19 fps.; MV-CU060-10GM — Prefer it for the 1/1.8-inch Sony IMX178 platform at 19.1 fps.; MV-CU013-80UM — Prefer it for 240.4 fps global-shutter capture at 1280 × 1024..

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables

GigE

I/O & power cables

Hirose 6-pin IO

Power

Power

Mounting

Camera mounts

All accessory families →

FAQ

When is MV-CU060-60GM preferable to the colour version?

Choose MV-CU060-60GM when the decision is based on brightness, edges, or texture and colour is not part of the criterion. It delivers Mono 8 at 3200 × 1944 and 19 fps. MV-CU060-60GC uses the same basic sensor geometry but outputs Bayer BG 8 colour.

What optical demands follow from the 2 µm BSI sensor?

The C-mount lens must cover a 1/2.4-inch image format and preserve detail appropriate to 2 µm sampling across 3200 × 1944. Confirm image circle, field of view, and working distance together; a compatible mount alone does not establish useful spatial resolution.

Can MV-CU060-60GM use PoE instead of separate power?

PoE is an optional power route. The camera can alternatively be fed with 9 V DC to 24 V DC through its power and I/O connection. Typical consumption is 1.6 W at 12 V DC, a figure that can be used to size the selected supply arrangement.

What exposure range is available for low-speed inspection?

Exposure is adjustable from 52 µs to 10 sec, with gain from 0 dB to 24 dB. The broad range supports controlled bright-field work and longer integrations on stationary targets. Because the shutter is rolling, long exposures are not intended for preserving geometry on moving parts.

Which signals are present on the six-pin camera connector?

The 6-pin P7 connector carries one opto-isolated input, one opto-isolated output, and one bidirectional non-isolated I/O. These channels can link an external trigger, a lighting event, and a machine-level status or control line to the image sequence.