Hikrobot MV-DP2061

Wide shallow-field profiling

A 46.6 mm reference field paired with a 10.4 mm Z range gives MV-DP2061 a wide, shallow measurement geometry. The reference distance is 60.2 mm, and each profile contains 3200 points. Z resolution spans 2.71 to 3.26 µm with 0.74 µm repeatability, while high-frame-rate operation runs from 3.3 to 23.9 kHz.

The profiler can follow height, edge and surface variation across parts that need more X coverage than depth. Its field changes from 44.4 mm near to 48.8 mm far, keeping the lateral envelope relatively stable through the 10.4 mm height range. Gigabit Ethernet carries the profiles, and the IP67 housing with a 0 to 45 °C operating range suits exposed line-side mounting.

MV-DP2061 covers more width than MV-DP2062, whose reference field is 19 mm and repeatability is 0.30 µm. MV-DP2080 extends width further to 62.9 mm and Z range to 15.2 mm, with 1.03 µm repeatability. Pick MV-DP2061 for the intermediate 46.6 mm field and 0.74 µm repeatability; move narrower for finer Z performance or wider for larger parts.

Overview

A DP2000 series laser profiler — the base class: the sensor projects a laser line across the part and measures height at every point of the section, up to 3200 points per profile.

Working distance 60.2 mm, measurement range 10.4 mm.

Used where a profile is needed rather than a picture: weld bead control, adhesive bead height, gap and flush, warpage, parcel volume. Data goes to VM3D or 3DMVS, and to third-party software over a standard protocol.

Specifications

Selection and applications

Shallow profile measurement across a 46.6 mm reference field. Edge and surface tracking through a 10.4 mm Z range. 3200-point contour acquisition up to 23.9 kHz.

Minimum kit: MV-DP2061, a Gigabit Ethernet cable, a 12-pin M12 power and I/O cable, a 24 VDC supply, and a 3DMVS, VM3D or third-party software host form the minimum acquisition kit.

Nearby in the range: MV-DP2062 — Prefer it when a 19 mm reference field and 0.30 µm repeatability fit a narrower target.; MV-DP2080 — Prefer it for a 62.9 mm reference field and a 15.2 mm Z range..

Cables and accessories for this model

Compatibility per manufacturer data.

Other

3D accessories

All accessory families →

FAQ

What part width and height variation fit the MV-DP2061 envelope?

At the 60.2 mm reference distance, the X field is 46.6 mm and the Z range is 10.4 mm. The width changes from 44.4 mm near to 48.8 mm far, so both the part outline and expected height excursion should remain inside those bounds.

What sampling detail does MV-DP2061 provide across a profile?

Each profile contains 3200 points. The transverse resolution is 14.1 to 15.4 µm, while Z resolution is 2.71 to 3.26 µm and repeatability is 0.74 µm under the stated gauge-block test condition.

Which scan rates are available for moving-line use with MV-DP2061?

High-frame-rate operation extends from 3.3 to 23.9 kHz. That range can be selected against the motion rate and required spacing between profiles, while the 3200-point sampling stays across the X direction of each captured profile.

How does MV-DP2061 connect to the network and machine signals?

Profile traffic uses 1000 Mbit/s Gigabit Ethernet and can operate over 100 Mbit/s Fast Ethernet. The 12-pin M12 power and I/O interface provides two isolated inputs, two differential inputs and one differential output, with a 24 VDC supply.

What are the housing limits and physical size of MV-DP2061?

The 140 × 98 × 51 mm enclosure weighs approximately 850 g and is rated IP67. The working temperature is 0 to 45 °C, storage is -30 to 80 °C, and permitted humidity is 20 to 85% RH without condensation.

What software choices are documented for MV-DP2061 acquisition?

The named routes are 3DMVS, VM3D and third-party software. All use the Ethernet output from the 3200-point profiler; the host and link should therefore be chosen for the active rate within the stated 3.3 to 23.9 kHz range.