3D laser profile sensor · DP3000 series Laser Profiler
Hikrobot MV-DP3580
- Lead time
- from 5 days
- Warranty
- 36 months
Fast large-volume contour acquisition
A 580 mm Z range and 585 mm working distance give MV-DP3580 a large measurement volume, while a 3.4 to 46.7 kHz high-frame-rate range supports fast motion. The X field spans 174 mm near, 328 mm at reference and 482 mm far. Profiles contain 3200 points, with 14.45 to 98.78 µm Z resolution and 4.84 µm repeatability.
The combination supports overall height, shape and edge tracking on large moving objects without placing the sensor close to the surface. Profile, depth and brightness outputs are available over Gigabit Ethernet. Software or differential-encoder hardware triggering aligns scans with motion, and a 12-pin M12 connection carries 24 VDC plus isolated and differential I/O.
MV-DP3580 raises the rate ceiling over MV-DP2470, which covers 670 mm along Z but reaches 23.9 kHz and states 4.45 µm repeatability. MV-DP3900 keeps the 46.7 kHz ceiling while expanding the Z range to 905 mm and the reference field to 495 mm, with 8.12 µm repeatability. Select MV-DP3580 when 580 mm of depth and finer repeatability are sufficient; move to MV-DP3900 for the larger volume.
Overview
A DP3000 series laser profiler — the mid class: the same 3200 points per profile at twice the scan rate, up to 46.7 kHz.
Working distance 585 mm, measurement range 580 mm.
Used where a profile is needed rather than a picture: weld bead control, adhesive bead height, gap and flush, warpage, parcel volume. Data goes to VM3D or 3DMVS, and to third-party software over a standard protocol.
Available versions
One device, different revisions. We ship the current one by default; if a specific revision is already installed on your line, name it in the request and we will match it.
| Part number | PN | |
|---|---|---|
| MV-DP3580-01P | 306400451 | |
| MV-DP3580-03P | 306400453 |
Specifications
| Data interface | GigE (Fast Ethernet compatible) |
| 3D scan rate | 3400…46700 Hz @ high frame rate mode |
| Depth measurement range | 580 mm |
| Points per profile | 3200 |
| Reference distance | 585 mm |
| Reference field of view | 328 mm |
| Z repeatability | 4.84 µm |
| Z resolution | 14.45…98.78 µm |
| Trigger mode | software, hardware, encoder |
| Client software | 3DMVS, VM3D |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit) |
| Digital I/O lines | 2 inputs, opto-isolated, lines 0, 9; 2 inputs, differential, lines 3, 6; 1 output, differential, line 1 |
| Digital output count | 11 |
| Digital I/O connector | M12 12-pin |
| Power supply | 24 V |
| Power consumption | 17.2 W (typical) @ DC, supply voltage 24 V |
| Ingress protection | IP67 |
| Working temperature | 0…45 °C |
| Storage temperature | -30…80 °C |
| Dimensions | 210.5×125.5×59 mm |
| Weight | 1550 g (approx.) |
| Far field of view | 482 mm |
| Near field of view | 174 mm |
| Operating environment | non-condensing1 |
| Output data type | profile, depth image, brightness image |
| Profile data interval | 50.3…159.4 µm |
| Z linearity | -0.01…0.01 % @ % of measurement range |
| Power supply connector | M12 12-pin |
| Recommended system CPU | Intel Core i5 |
| Trigger signalling | differential @ differential, encoder trigger |
| Part number | Laser safety class | Wavelength | Humidity | System memory required |
|---|---|---|---|---|
| MV-DP3580-01P | 3B | 405 nm | 20…85 % @ non-condensing | ≥8 GB |
| MV-DP3580-03P | 3R | 650 nm | 20…85 % | ≥8 GB (min.) |
1 not stated for all variants
Documents
Selection and applications
Large-object height measurement through a 580 mm Z range. Broad contour capture across a 328 mm reference field. Encoder-triggered 3200-point profiling up to 46.7 kHz.
Minimum kit: MV-DP3580, a Gigabit Ethernet cable, a 12-pin M12 power and I/O cable, a 24 VDC supply, and a 3DMVS, VM3D or third-party software host form the minimum acquisition kit.
Nearby in the range: MV-DP2470 — Prefer it for a 670 mm Z range and 4.45 µm repeatability when 23.9 kHz is sufficient; MV-DP3900 — Prefer it for a 905 mm Z range and 495 mm reference field at rates up to 46.7 kHz.
Cables and accessories for this model
Compatibility per manufacturer data.
- Other
- 3D accessories
FAQ
What measurement volume surrounds the MV-DP3580 reference distance?
The sensor covers 580 mm along Z at a 585 mm reference distance. X width changes from 174 mm near through 328 mm at reference to 482 mm far, so the target and fixture clearances must be checked throughout the full expanding volume.
What profile detail is available across the MV-DP3580 field?
Each profile contains 3200 points. The X interval ranges from 50.3 to 159.4 µm, and Z resolution ranges from 14.45 to 98.78 µm. The stated Z repeatability is 4.84 µm under the cited gauge-block measurement condition.
Which scan-rate limits are listed for the MV-DP3580 executions?
The main high-frame-rate entry runs from 3.4 to 46.7 kHz. A separate entry states a 19 kHz maximum in ROI mode. The model has 01P and 03P documents, so the selected execution determines which rate entry governs.
How can MV-DP3580 acquisition be synchronized to a moving axis?
The listed trigger methods are software trigger and hardware trigger from a differential encoder. A 12-pin M12 interface provides isolated and differential timing channels, while the 3200-point profile stream travels over Gigabit Ethernet.
What power and environmental limits apply to MV-DP3580?
Typical consumption is 17.2 W from a 24 VDC supply. The IP67 housing operates from 0 to 45 °C and stores from -30 to 80 °C. Humidity is specified from 20 to 85% RH without condensation.
Which applications can receive output from the MV-DP3580?
3DMVS, VM3D and third-party software are listed. The available measurement products are profile data, depth images and brightness images, transferred over 1000 Mbit/s Gigabit Ethernet with 100 Mbit/s Fast Ethernet compatibility.