3D laser profile sensor · DP series Laser Profiler
Hikrobot MV-DP4090-01P
- Warranty
- 36 months
High-density scanning across 42 mm of height
A 42 mm Z range at a 94 mm reference distance positions MV-DP4090-01P between the compact DP4000 geometries and their larger-volume models. The X field expands from 44 mm near through 51.5 mm at reference to 59 mm far. Its profiles contain 4080 points, with 1.87 to 3.98 µm Z resolution and 0.66 µm repeatability.
Height, step and contour changes across a medium-width moving part can be captured at 2.5 kHz, with a 49 kHz rate in ROI mode. The 10.6 to 15.9 µm profile interval describes sampling across X. Gigabit Ethernet carries the measurement stream, while the 24 VDC input and 20.6 W consumption set the electrical requirement.
MV-DP4090-01P doubles the Z range of MV-DP4060-01P from 21 to 42 mm and widens the reference field from 32 to 51.5 mm, with repeatability changing from 0.36 to 0.66 µm. MV-DP4180 extends depth to 100 mm and the reference field to 100 mm, with 1.50 µm repeatability. MV-DP4090-01P suits the middle envelope while retaining 4080 points and a 49 kHz ROI ceiling.
Specifications
| Scan frame rate | 2.5 kHz / 49 kHz ROI mode |
| Data interface | Gigabit Ethernet (1000 Mbit/s), compatible with Fast Ethernet (100 Mbit/s) |
| Wavelength | 405 nm |
| Resolution z-axis | 1.87 to 3.98 µm |
| Repeatability z-axis | 0.66 µm |
| Linearity z-axis | 0.01 % of MR |
| Measurement range z-axis | 42 mm |
| Reference distance | 94 mm |
| Power supply | 24 VDC |
| Power consumption | 20.6 W |
| Ingress protection | IP67 |
| Operating temperature | 0 to 45 °C |
| Humidity | 20 to 85 % RH |
| Dimensions | 150.5 × 100.5 × 67 mm |
| Weight | 1150 g |
| Data points per profile | 4080 |
| Measurement range x-axis near fov | 44 mm |
| Measurement range x-axis reference distance | 51.5 mm |
| Measurement range x-axis far fov | 59 mm |
| Profile data interval | 10.6 to 15.9 µm |
| Laser class | Class 3R |
Selection and applications
4080-point profile capture across a 51.5 mm reference field. Height and contour measurement through a 42 mm Z range. ROI-based moving-line scanning at up to 49 kHz.
Minimum kit: MV-DP4090-01P, a Gigabit Ethernet cable, a power cable for the 24 VDC input, and a 24 VDC supply form the minimum acquisition kit.
Nearby in the range: MV-DP4060-01P — Prefer it for a 21 mm Z range and 0.36 µm repeatability over a 32 mm reference field.; MV-DP4180 — Prefer it when both the Z range and reference field must increase to 100 mm..
Cables and accessories for this model
Compatibility per manufacturer data.
- Other
- 3D accessories
FAQ
What field dimensions surround the MV-DP4090-01P reference plane?
The Z measurement range is 42 mm at a 94 mm reference distance. The X field is 44 mm near, 51.5 mm at reference and 59 mm far, so the usable lateral width expands as the target moves through the height range.
What sampling and repeatability does MV-DP4090-01P provide?
Each profile contains 4080 data points. The transverse interval varies from 10.6 to 15.9 µm, Z resolution runs from 1.87 to 3.98 µm, and the stated Z repeatability is 0.66 µm.
How does ROI mode affect the MV-DP4090-01P scan rate?
The normal listed frame rate is 2.5 kHz, while ROI mode reaches 49 kHz. Restricting the active region therefore provides the higher rate for motion-driven acquisition while the sensor retains 4080 points per full profile.
Which network interface carries MV-DP4090-01P measurements?
The sensor uses 1000 Mbit/s Gigabit Ethernet and remains compatible with 100 Mbit/s Fast Ethernet. The link should be chosen for the active scan rate and the 4080 points produced in each profile.
What supply and enclosure figures apply to MV-DP4090-01P?
The profiler requires 24 VDC and consumes 20.6 W. It measures 150.5 × 100.5 × 67 mm, weighs 1150 g and carries an IP67 ingress rating, defining the electrical load and mounting envelope.
What ambient and laser conditions apply around MV-DP4090-01P?
The working temperature is 0 to 45 °C and the humidity range is 20 to 85% RH. The optical source is a 405 nm Class 3R laser, which is the stated laser classification for this model.