3D laser profile sensor · DP series
Hikrobot MV-DP4060-01P
- Warranty
- 36 months
Dense profiles over a compact 21 mm depth
A 4080-point profile across a 32 mm reference field gives MV-DP4060-01P dense transverse sampling in a compact measurement volume. Its Z range is 21 mm at a 60 mm reference distance, with 1.06 to 1.98 µm Z resolution and 0.36 µm repeatability. Scanning runs at 2.5 kHz over the main range and reaches 49 kHz at maximum.
The 28 to 36 mm X envelope and 6.9 to 9.7 µm profile interval suit fine height, edge and contour checks. Consumer electronics, electronics manufacturing and automobile applications are specifically listed. Software or differential-encoder triggering can align measurements to motion, and profile, depth and brightness outputs pass through Gigabit Ethernet.
MV-DP4060-01P increases both depth and profile count over MV-DP4020-01P, which covers 5.2 mm along Z with 4080 points and 0.15 µm repeatability. MV-DP4090-01P extends the Z range to 42 mm and the reference field to 51.5 mm while retaining a 49 kHz ROI ceiling, with 0.66 µm repeatability. Select among them by height envelope, field width and repeatability.
Specifications
| Product type | 3D Laser Profile Sensor |
| Scan frame rate | 2.5 kHz |
| Data interface | Gigabit Ethernet (1000 Mbit/s), compatible with Fast Ethernet (100 Mbit/s) |
| Wavelength | 405 nm |
| Resolution z-axis | 1.06 to 1.98 μm |
| Repeatability z-axis | 0.36 μm |
| Linearity z-axis | 0.01 % of MR |
| Measurement range z-axis | 21 mm |
| Reference distance | 60 mm |
| Power supply | 24 VDC |
| Power consumption typical | 20.6 W |
| Ingress protection | IP67 |
| Operating temperature | 0 to 45 °C |
| Storage temperature | -30 to 80 °C |
| Humidity | 20% RH to 85% RH (no condensation) |
| Dimensions | 144 × 110 × 67 mm |
| Weight | 1160 g |
| Max scan rate (ROI) | 49 kHz |
| Measurement range x-axis far fov | 36 mm |
| Measurement range x-axis near fov | 28 mm |
| Applications | Consumer electronics, electronics manufacturing, automobile |
| Data output | Profile data, depth image, brightness image |
| Data points per profile | 4080 points/profile |
| Laser class | Class 2 |
| Measurement range x-axis reference distance | 32 mm |
| Profile data interval | 6.9 to 9.7 µm |
| Trigger mode | Software trigger, hardware trigger (differential encoder) |
Selection and applications
Fine 4080-point contour capture across a 32 mm reference field. Height and edge inspection through a 21 mm Z range. Triggered line profiling at up to 49 kHz.
Minimum kit: MV-DP4060-01P, a Gigabit Ethernet cable, a power cable for the 24 VDC input, and a 24 VDC supply form the minimum acquisition kit.
Nearby in the range: MV-DP4020-01P — Prefer it for a 5.2 mm Z range and 0.15 µm repeatability at a 22.6 mm reference distance.; MV-DP4090-01P — Prefer it when the Z range must extend to 42 mm and the reference field to 51.5 mm..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- GigE
- Other
- 3D accessories
FAQ
What measurement volume does MV-DP4060-01P cover at 60 mm?
The sensor covers 21 mm along Z around the 60 mm reference distance. Its X field changes from 28 mm near through 32 mm at reference to 36 mm far, defining the target and fixture envelope.
How much spatial detail is present in an MV-DP4060-01P profile?
Each profile contains 4080 points, with a transverse data interval from 6.9 to 9.7 µm. Z resolution spans 1.06 to 1.98 µm, and the stated Z repeatability is 0.36 µm.
What scan-rate modes are available on MV-DP4060-01P?
The listed scan frame rate is 2.5 kHz and the maximum scan frame rate is 49 kHz. Software trigger and differential-encoder hardware trigger are available to coordinate the 4080-point profiles with the acquisition sequence.
Which data products can MV-DP4060-01P transfer over Ethernet?
The listed outputs are profile data, depth images and brightness images. They use 1000 Mbit/s Gigabit Ethernet, and the interface is also compatible with 100 Mbit/s Fast Ethernet when that lower link rate fits the active stream.
What power and environmental conditions apply to MV-DP4060-01P?
The sensor uses 24 VDC and has typical consumption of 20.6 W. Its IP67 housing works from 0 to 45 °C and stores from -30 to 80 °C, with humidity specified from 20 to 85% RH without condensation.
What laser and mechanical details affect an MV-DP4060-01P station?
The sensor uses a 405 nm Class 2 laser. Its housing measures 144 × 110 × 67 mm and weighs 1160 g. Those figures define the mounting envelope and load alongside the 60 mm reference distance.