Hikrobot MV-GE1104

Four-port GigE host integration

Four 1 Gbit/s RJ45 camera inputs on a PCI-E gen2 × 4 card give MV-GE1104 a four-stream acquisition profile. The card carries 512 MB DDR3-RAM and transfers as much as 860 MB/s to the host, with 800 MB/s stated as sustained bandwidth. At 10 W typical consumption, it targets systems that consolidate four GigE links through the shared host path.

An inspection computer can use the four ports for separate views of the same process or for four independent stations, provided their combined traffic remains within the card's host path. The operating range of 0 to 60 °C supports installation in a controlled machine computer, and the 181 × 126.3 × 21.6 mm board fits a full-height PCI-E arrangement. MVS is the listed client environment for Windows 7, 10 and 11.

MV-GE1104 and MV-GE1104P both accept four cameras at 1 Gbit/s and provide 800 MB/s sustained transfer with 512 MB DDR3. The P model adds up to 15.4 W PoE per channel and uses PCI-E gen2 × 2, while this board uses gen2 × 4. MV-GE1004 retains gen2 × 4 but raises memory to 1 GB and sustained bandwidth to 1600 MB/s. Select according to camera-power needs, slot width and aggregate traffic.

Specifications

Selection and applications

Four-stream GigE collection. Windows-based image acquisition. Buffered RJ45 camera input.

Minimum kit: Use MV-GE1104 in a PCI-E gen2 × 4 Windows host with as many as four GigE cameras, one RJ45 network cable per camera, and camera power matched to the attached devices.

Nearby in the range: MV-GE1104P — Prefer it when each of four camera ports must provide up to 15.4 W PoE.; MV-GE1004 — Prefer it for 1600 MB/s sustained bandwidth and a 1 GB buffer.; MV-GE2004 V2.0 — Prefer it for four 10/100/1000 Mbit/s ports and Linux host support..

Cameras that connect to this board

RJ45 × 4 · up to 4 cameras · 860 MB/s:

Matched by interface and port count.

FAQ

What aggregate host transfer rate can MV-GE1104 sustain?

The board lists 860 MB/s maximum transfer bandwidth and 800 MB/s sustained bandwidth. Four RJ45 camera ports feed that shared path, with 512 MB of DDR3-RAM available as on-board memory.

Which PCI-E connection is used by the MV-GE1104 card?

MV-GE1104 uses PCI-E gen2 × 4. Its four camera interfaces are RJ45 and each camera connection is specified at 1 Gbit/s, so the host must provide the stated slot connection for the board.

What temperature and humidity range applies to MV-GE1104?

Operation is specified from 0 to 60 °C at 10 to 95% RH. The storage interval is -20 to 70 °C. These limits should be checked against the temperature and condensation control inside the host enclosure.

Which host operating systems are supported by MV-GE1104?

The listed operating systems are Windows 7, Windows 10 and Windows 11. MVS is named as the client software for configuration and acquisition on those hosts.

Should MV-GE1104 or MV-GE1104P be used for powered cameras?

MV-GE1104P is the variant with PoE, providing up to 15.4 W per channel and requiring ATX power for that function. MV-GE1104 shares the four-port, 1 Gbit/s and 800 MB/s acquisition figures but uses PCI-E gen2 × 4.

When does MV-GE1004 offer more headroom than MV-GE1104?

MV-GE1004 raises sustained host transfer from 800 to 1600 MB/s and on-board DDR3 memory from 512 MB to 1 GB. It also includes four-port PoE and 24 machine-I/O connections, while keeping PCI-E gen2 × 4.