Hikrobot MV-SC2005AM-02WBN V3.0

Fixed-zone code inspection at 100 fps

A fixed 170 × 130 mm field at 100 ± 5 mm working distance gives MV-SC2005AM-02WBN V3.0 a tightly defined inspection geometry. The mono global-shutter CMOS sensor records 800 × 600 pixels at up to 100 fps with 4.8 µm sampling. Its 2.5 mm focal length and integrated red, blue and white illumination create an all-in-one optical arrangement for Data Matrix ECC200 marks in the stated DM12 and DM14 formats.

The global shutter and 100 fps ceiling suit repeated capture of moving marked parts through the fixed scene. Fast Ethernet provides the network path, while RS-485 supports serial integration. The device operates from 24 V DC and consumes approximately 3 W without illumination or up to 18 W with illumination, figures that matter when the integrated light is strobed or held on. Its IP65 enclosure is specified for −10 °C to 50 °C operation.

MV-SC2005AC shares the 800 × 600 resolution and 4.8 µm pixel value and pairs them with white LED light. This V3.0 model instead combines red, blue and white sources with a fixed 170 × 130 mm field. MV-SC1008M offers 1024 × 768 mono capture but only 15 fps, while MV-SC2023XC reaches 1920 × 1280 at 75 fps with color imaging. Select this model when its 100 fps mono rate, fixed 100 mm geometry and DM12/DM14 task match the station.

Selection and applications

DM12 and DM14 code reading. High-rate fixed-zone inspection. Three-color illuminated capture.

Minimum kit: The minimum set is MV-SC2005AM-02WBN V3.0 with its fixed 2.5 mm optics and integrated light, a Fast Ethernet or RS-485 cable and a 24 V DC supply.

Nearby in the range: MV-SC2005AC — Use it for the same 800 × 600 and 4.8 µm image format with white LED light; MV-SC1008M — Choose it when 1024 × 768 mono sampling matters more than the 100 fps rate; MV-SC2023XC — Prefer it for 1920 × 1280 color imaging at up to 75 fps.

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables

GigE

Power

Power

All accessory families →

FAQ

What inspection area does MV-SC2005AM-02WBN V3.0 cover?

At the stated 100 mm working distance, the field of view is 170 × 130 mm. The permitted working-distance band is 100 ± 5 mm, so the mechanical fixture should hold the code surface within that interval to preserve the defined imaging geometry.

Which codes are identified for MV-SC2005AM-02WBN V3.0?

The listed symbology is Data Matrix ECC200, specifically DM12 and DM14. The unit combines this task with an 800 × 600 mono global-shutter sensor, a 2.5 mm focal length and integrated red, blue and white light.

Why is the 100 fps global shutter relevant to this fixed scene?

The global shutter captures the complete 800 × 600 frame at one exposure instant, and the sensor can acquire up to 100 fps. Together these properties suit frequently arriving marked parts moving through the defined 170 × 130 mm inspection area.

How should power be sized when the integrated illumination is used?

The supply is 24 V DC. Consumption is approximately 3 W with the illumination off and can reach 18 W with illumination active, so the power design must use the illuminated maximum rather than the lower unlit figure.

Which communication links does this V3.0 vision sensor expose?

Both Fast Ethernet and RS-485 are listed. Fast Ethernet supplies the network connection, while RS-485 provides a serial route to line equipment. The 68 × 60 × 40.8 mm IP65 housing defines the space available for those connections.