Hikrobot MV-SC5020XM

Motion inspection with mono imaging

High-cycle mono inspection is the operating point of MV-SC5020XM. A 1/2.53-inch CMOS sensor delivers 1600 × 1216 frames through a global shutter at up to 100 fps, with 3.45 µm pixels and exposure beginning at 15 µs. Vision Master Platform includes deep-learning functions for OCR, object recognition and defect detection, so the camera can turn images into inspection results locally.

The mono output fits contour, presence and printed-mark analysis where colour separation is not an inspection variable. Global exposure and the short minimum exposure help arrest conveyor motion, while three opto-isolated inputs and three opto-isolated outputs provide trigger and decision paths. Gigabit Ethernet supports PROFINET, EtherNet/IP, Modbus, TCP and UDP for passing status or results to automation equipment.

MV-SC5020XC is the direct colour counterpart, retaining 1600 × 1216 and 100 fps; use it when colour itself carries the feature. MV-SC5050XM provides 2432 × 2048 at 60 fps for a denser image with a slower maximum cycle. For still more resolution, MV-SC5120XM reaches 4096 × 2944 at 30 fps and uses a larger 1.1-inch sensor, placing MV-SC5020XM at the speed-led end of this mono group.

Available versions

One device, different revisions. We ship the current one by default; if a specific revision is already installed on your line, name it in the request and we will match it.

Documents

Selection and applications

Mono contour inspection at up to 100 fps. Embedded OCR on moving products. Triggered defect classification with discrete output.

Minimum kit: Pair MV-SC5020XM with a C-mount lens or its mechanical optical configuration, a Gigabit Ethernet cable, a 12-pin M12 power and I/O cable, and a 24 VDC source.

Nearby in the range: MV-SC5020XC — Prefer it when the 1600 × 1216 inspection must retain colour information; MV-SC5050XM — Prefer it for 2432 × 2048 mono imaging when 60 fps is sufficient; MV-SC5120XM — Prefer it for 4096 × 2944 mono capture when a 30 fps ceiling fits the cycle.

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables

ID Ethernet, M12 8-pin

I/O & power cables

ID power, M12 12-pin

Power

Power

Optics

M12 lenses

Lighting

SC lightingID/SC lighting

Mounting

Reader mountsCamera mounts

Protection

Covers & filters

All accessory families →

FAQ

Why select the mono variant for a high-speed inspection station?

MV-SC5020XM records mono frames at 1600 × 1216 and up to 100 fps. That output is aligned with inspections based on intensity, edge position, shape or printed contrast. Its paired MV-SC5020XC keeps the same resolution and rate when colour information is required instead.

What is required for power, triggering and result output?

The unit takes 24 VDC through a 12-pin M12 connection that also carries I/O. It provides three opto-isolated inputs, three opto-isolated outputs and one RS-232 channel. This permits a sensor or controller to trigger capture and receive a discrete inspection decision.

What image timing range is available for the two optical forms?

Both forms start exposure at 15 µs. The C-mount form extends to 1 sec, whereas the mechanical form is listed to 3000 µs. The CMOS sensor has a global shutter, and full-frame acquisition reaches 100 fps, so exposure can be coordinated with short machine cycles.

Can this model exchange results directly with a PLC network?

The 1000 Mbit/s Gigabit Ethernet interface supports PROFINET, EtherNet/IP and Modbus alongside TCP, UDP, Fins, MC and FTP. Processing is performed through Vision Master Platform with its deep-learning module, allowing a result to be sent without treating the camera only as an image source.

How should the enclosure and ambient range be handled?

MV-SC5020XM is listed for operation from 0 °C to 50 °C and 20% RH to 95% RH without condensation. IP67 protection depends on correct installation of the waterproof lens cap, so the optical closure is part of maintaining the stated ingress rating.