Area camera · CA Series
Hikrobot MV-CA020-10UC V2.0
- Warranty
- 36 months
Discontinued
The manufacturer has discontinued this model.
Last buy date at the manufacturer: 2025-12-30.
Manufacturer-listed replacement:
USB color capture in the range
An 89.1 fps color stream at 1624 × 1240 distinguishes MV-CA020-10UC V2.0 within the 2 MP USB group. Its 1/1.7-inch Sony IMX430 CMOS sensor combines 4.5 µm pixels with a global shutter. USB 3.0 carries the images, dynamic range reaches 75.4 dB, and exposure settings extend from 1 µs to 10 sec.
Color checks on moving parts, orientation verification and rapid presence detection follow from the color output, global shutter and 89.1 fps ceiling. USB 3.0 can power the camera as well as transport data, while a 9 V DC to 24 V DC input supports separate supply arrangements. The body measures 29 mm × 29 mm × 30 mm and accepts C-mount lenses.
MV-CA020-10UM V2.0 has the same IMX430, USB 3.0 interface, resolution and 89.1 fps rate but outputs mono, making it the choice for intensity-based checks. MV-CA020-10GC V3.0 retains color but changes to Gigabit Ethernet with PoE and 60 fps. MV-CA017-10GC also uses color GigE, with 1608 × 1104 resolution and 9 µm pixels; select MV-CA020-10UC V2.0 when color, USB power and the higher listed rate are required together.
Specifications
| Product type | 2 MP USB 3.0 Area Scan Camera |
| Sensor type | CMOS, global shutter |
| Sensor model | Sony® IMX430 |
| Sensor format | 1/1.7″ |
| Resolution | 1624 × 1240 |
| Pixel size | 4.5 μm × 4.5 μm |
| Maximum frame rate | 89.1 fps @ 1624 × 1240 |
| Mono color | Color |
| Dynamic range | 75.4 dB |
| Exposure time | 1 μs to 10 sec |
| Gain | 0 dB to 24 dB |
| Data interface | USB3.0, compatible with USB2.0 |
| Digital I/O | 6-pin Hirose connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1(Line 1), and bi-directional non-isolated I/O × 1 (Line 2) |
| Lens mount | C-mount |
| Power supply | 9 VDC to 24 VDC, supports USB3.0 power supply |
| Power consumption | Typ. 3.9 W @ 5 VDC (USB3.0 provides power supply) |
| Ingress protection | IP30 (under proper lens installation and wiring) |
| Operating temperature | 0 °C to 50 °C (32 °F to 122 °F) |
| Storage temperature | –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 80% RH (no condensation) |
| Dimensions | 29 mm × 29 mm × 30 mm (1.1″ × 1.1″ × 1.2″) |
| Weight | Approx. 80 g (0.2 lb.) |
| Certification | CE-EMC, KC, UL, FCC-SDoC |
| Compatibility | USB3 Vision, GenICam |
Selection and applications
Color sorting capture at 89.1 fps. USB-powered imaging at 1624 × 1240. Global-shutter orientation checks on moving parts.
Minimum kit: The minimum imaging kit is MV-CA020-10UC V2.0, a C-mount lens, a USB 3.0 cable, and USB 3.0 power or a 9 V DC to 24 V DC supply.
Nearby in the range: MV-CA020-10UM V2.0 — Prefer it for mono output with the same 1624 × 1240 resolution and 89.1 fps rate.; MV-CA020-10GC V3.0 — Prefer it for color Gigabit Ethernet capture with PoE at up to 60 fps.; MV-CA017-10GC — Prefer it for a 1.1-inch color sensor with 9 µm pixels over Gigabit Ethernet..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- USB 3.0
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What full-resolution color frame rate is available over USB 3.0?
MV-CA020-10UC V2.0 reaches 89.1 fps at 1624 × 1240. The Sony IMX430 CMOS sensor provides color output with a global shutter, enabling each frame of a moving subject to use one common exposure interval.
Can USB 3.0 supply power as well as carry the image stream?
Yes. USB 3.0 power is supported, with typical camera consumption of 3.9 W at 5 V DC when USB provides the supply. The camera also accepts an external input from 9 V DC to 24 V DC.
Which sensor format and mount govern the lens selection?
The optical interface is C-mount, paired with a 1/1.7-inch Sony IMX430 sensor and 4.5 µm × 4.5 µm pixels. A lens therefore needs C-mount mechanics and an image circle covering the stated 1/1.7-inch format.
What I/O is available for a trigger and synchronized device output?
The 6-pin Hirose connector provides one opto-isolated input on Line 0, one opto-isolated output on Line 1 and one bidirectional non-isolated I/O on Line 2. It also carries the separate power connection.
How does this color model differ from MV-CA020-10UM V2.0?
Both cameras use the Sony IMX430, USB 3.0, 1624 × 1240 resolution, 4.5 µm pixels and an 89.1 fps maximum. MV-CA020-10UC V2.0 produces color images, while MV-CA020-10UM V2.0 produces mono images.