Area camera · CS Series

Hikrobot MV-CS020-10UC

1624 × 1240Sony® IMX43090 fps @ 1624 × 1240 Bayer RG 8USB 3.0, compatible with USB 2.0IP40
Price on requestAn engineer will confirm pricing and lead time in the first reply.
Warranty
36 months
Find the right model
Hikrobot MV-CS020-10UC

Ninety-frame color inspection over USB

A 90 fps 2 MP color stream is the key characteristic of MV-CS020-10UC. Its Sony® IMX430 1/1.7-inch CMOS sensor produces 1624 × 1240 Bayer RG 8 with 4.5 µm pixels and a global shutter. USB 3.0 carries the data and can provide 5 V DC power, while exposure ranges from 1 µs in UltraShort mode to 10 sec in standard mode. The 30 mm-deep body suits a compact camera-to-host station.

The model can follow moving assemblies, evaluate color features and locate small printed or machined regions with more spatial samples than MV-CS016-10UC. At the short exposure end, global capture limits motion smear and preserves object geometry when illumination is matched to the event. The P7 port offers an isolated input, isolated output and bidirectional line for machine timing, and a separate 9–24 V DC feed is supported when USB power is not used.

MV-CS020-10GC retains the IMX430 and color output but uses Gigabit Ethernet with PoE at 60 fps and a 42 mm-deep body. MV-CS020-10UM shares USB 3.0, 1624 × 1240 and 90 fps in the paired configuration. MV-CS020-61UC V5.0 raises USB acquisition to 99.6 fps with a Stacked BSI sensor and dual high-full-well or high-sensitivity modes. Choose this model for straightforward IMX430 color operation at the 90 fps USB point.

Specifications

Product type2 MP USB 3.0 Area Scan Camera
Sensor typeCMOS, global shutter
Sensor modelSony® IMX430
Sensor format1/1.7″
Resolution1624 × 1240
Pixel size4.5 μm × 4.5 μm
Maximum frame rate90 fps @ 1624 × 1240 Bayer RG 8
Mono colorColor
Dynamic range71.5 dB
Exposure timeUltraShort exposure mode: 1 μs to 5 μs Standard exposure mode: 6 μs to 10 sec
Gain0 dB to 24 dB
Data interfaceUSB 3.0, compatible with USB 2.0
Digital I/O6-pin P7 connector provides power and I/O, including opto -isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2).
Lens mountC-mount
Power supply9 VDC to 24 VDC, supports USB power supply
Power consumptionTyp. 2.4 W @ 5 VDC (USB 3.0 provides power supply)
Ingress protectionIP40 (under proper lens installation and wiring)
Operating temperature–30 °C to 60 °C (–22 °F to 140 °F)
Storage temperature–30 °C to 70 °C (–22 °F to 158 °F)
Humidity20% RH to 95% RH (no condensation)
Dimensions29 mm × 29 mm × 30 mm (1.1″ × 1.1″ × 1.2″)
WeightApprox. 80 g (0.18 lb.)
CertificationCE-EMC, KC, UL
CompatibilityUSB3 Vision, GenICam

Selection and applications

Color part inspection at 90 fps. IMX430 global-shutter feature capture. Compact USB imaging at 1624 × 1240.

Minimum kit: MV-CS020-10UC, a C-mount lens, and a USB 3.0 cable supplying 5 V DC power, or a separate 9–24 V DC source.

Nearby in the range: MV-CS020-10GC — Prefer it for IMX430 color over Gigabit Ethernet with PoE at 60 fps.; MV-CS020-10UM — Prefer it for the paired USB 3.0 configuration at 90 fps.; MV-CS020-61UC V5.0 — Prefer it for a 99.6 fps Stacked BSI color stream with dual modes..

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables
USB 3.0
I/O & power cables
Hirose 6-pin IO
Power
Power

All accessory families →

FAQ

What is delivered at the camera's 90 fps operating point?

The stated ceiling is 90 fps at 1624 × 1240 Bayer RG 8. This is color output from the Sony® IMX430, using a 1/1.7-inch global-shutter sensor with 4.5 µm pixels.

How can the MV-CS020-10UC receive its operating power?

USB 3.0 can supply 5 V DC power, with typical consumption of 2.4 W. The camera also accepts 9–24 V DC through its 6-pin P7 connector, allowing power to be separated from the USB data path when required.

What exposure choices are available for motion capture?

UltraShort exposure covers 1 µs to 5 µs, and standard exposure covers 6 µs to 10 sec. The IMX430 global shutter captures all pixels in the same interval, supporting consistent geometry during rapid motion.

How is this USB model mechanically different from the GigE version?

MV-CS020-10UC measures 29 mm × 29 mm × 30 mm and weighs approximately 80 g. MV-CS020-10GC keeps the 29 mm square face but is 42 mm deep and approximately 100 g. Both use C-mount.

What temperature and ingress limits apply to operation?

The body is rated IP40 when the lens and wiring are installed correctly. The working range is –30 °C to 60 °C, storage is –30 °C to 70 °C, and humidity is 20% RH to 95% RH without condensation.

Typical applications