Board level area camera · CB Series
Hikrobot MV-CB016-10GC-S
- Warranty
- 36 months
Operating fit and variants
An M12 optical interface distinguishes MV-CB016-10GC-S within the Ethernet members of the 1.6 MP family. Behind it, the 1/2.9-inch Sony® IMX296 CMOS sensor uses 3.45 µm pixels, a global shutter and 1440 × 1080 Bayer RG 8 output at up to 65.2 fps. The network port runs at 1000 Mbit/s and remains compatible with 100 Mbit/s Ethernet.
Compact color stations can use the camera for checking moving assemblies, reading color-coded conditions or following component placement. Global shutter timing avoids row-dependent motion geometry, and UltraShort exposure from 1 µs to 14 µs supports strobed capture. Standard exposure spans 15 µs to 10 sec. PoE combines the network and power path, while a 9 VDC to 24 VDC input is available on the 6-pin power/I/O connector.
MV-CB016-10GC-C is the direct optical alternative: it retains the Sony® IMX296, 65.2 fps ceiling, PoE and 29 mm × 29 mm × 30.2 mm dimensions but changes to C-mount. MV-CB016-10UC-S V4.0 also has a small-thread S-mount and color output, yet moves data over USB 3.0 and raises the ADC 8 rate to 249.1 fps using the IMX273. The 10GC-S suits M12 optics and Ethernet cabling; the others address C-mount or substantially faster USB capture.
Specifications
| Product type | 1.6 MP GigE Board Level Camera |
| Sensor type | CMOS, global shutter |
| Sensor model | Sony® IMX296 |
| Sensor format | 1/2.9″ |
| Resolution | 1440 × 1080 |
| Pixel size | 3.45 μm × 3.45 μm |
| Maximum frame rate | 65.2 fps @ 1440 × 1080 Bayer RG 8 |
| Mono color | Color |
| Dynamic range | 74 dB |
| Exposure time | UltraShort exposure mode: 1 μs to 14 μs Standard exposure mode: 15 μs to 10 sec |
| Gain | 0 dB to 24 dB |
| Data interface | Gigabit Ethernet (1000 Mbit/s), compatible with Fast Ethernet (100 Mbit/s) |
| Digital I/O | 6-pin connector provides power and I/O, including non -isolated input × 1 (Line 0), non - isolated output × 1 (Line 1), and bi-directional non-isolated I/O × 1 (Line 2). |
| Lens mount | M12-mount |
| Power supply | 9 VDC to 24 VDC, supports PoE |
| Power consumption | Typ. 2.7 W @ 12 VDC |
| Operating temperature | 0 °C to 50 °C (32 °F to 122 °F) |
| Storage temperature | –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 80% RH (no condensation) |
| Dimensions | 29 mm × 29 mm × 30.2 mm (1.1″ × 1.1″ × 1.2″) |
| Weight | Approx. 45 g (0.1 lb.) |
| Certification | CE-EMC, KC |
| Compatibility | GigE Vision V2.0, GenICam |
Selection and applications
M12 color inspection on moving parts. PoE machine-state observation. Ethernet-triggered compact imaging.
Minimum kit: Use the camera with an M12-mount lens covering the 1/2.9-inch sensor, a Gigabit Ethernet cable, and either PoE or a 9 VDC to 24 VDC supply at the 6-pin connector.
Nearby in the range: MV-CB016-10GC-C — Choose it when the same 65.2 fps color GigE camera must use a C-mount lens.; MV-CB016-10UC-S V4.0 — Choose it when an S-mount color design needs USB 3.0 and up to 249.1 fps in ADC 8..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- GigE
- I/O & power cables
- Hirose 6-pin IOCB board-level IO
FAQ
What optics attach directly to MV-CB016-10GC-S during integration?
The camera provides an M12-mount for the 1/2.9-inch Sony® IMX296 sensor. Optical selection should cover that sensor format and supply the required field of view. Its body measures 29 mm × 29 mm × 30.2 mm and weighs approximately 45 g.
Which network rates are supported by MV-CB016-10GC-S?
The data interface is Gigabit Ethernet at 1000 Mbit/s, with stated support for Fast Ethernet at 100 Mbit/s. The image format reaches 1440 × 1080 Bayer RG 8 at 65.2 fps on the faster link.
How may MV-CB016-10GC-S be powered in an embedded system?
PoE is supported for combined power and Ethernet data. A separate 9 VDC to 24 VDC input can instead use the 6-pin connector. Typical draw is 2.7 W at 12 VDC, which defines the camera-side supply requirement.
How short can exposure be on MV-CB016-10GC-S during triggered capture?
UltraShort mode extends from 1 µs to 14 µs. Standard exposure runs from 15 µs to 10 sec. Together with the global shutter, the short range supports controlled-light imaging of targets moving through the camera's 1440 × 1080 field.
When is MV-CB016-10GC-C a better mechanical match than 10GC-S?
Select MV-CB016-10GC-C when the optical design is based on C-mount rather than the M12-mount fitted to 10GC-S. Sensor, color output, 65.2 fps rate, Ethernet interface, power options and enclosure dimensions otherwise match.