Board level area camera · CB Series
Hikrobot MV-CB016-10UC-S V4.0
- Warranty
- 36 months
Imaging tasks and family context
An S-mount and 249.1 fps ADC 8 ceiling bring compact optics and high capture rate together in MV-CB016-10UC-S V4.0. The camera uses a 1/2.9-inch Sony® IMX273 color CMOS sensor with global shutter, 1440 × 1080 resolution and 3.45 µm pixels. ADC 12 operation reaches 165.4 fps, giving two documented speed modes over USB 3.0.
Color-coded component checks, rapid pick-and-place observation and strobed feeder monitoring follow directly from the global exposure and high frame rates. UltraShort exposure covers 1 µs to 14 µs, while Standard mode runs from 15 µs to 10 sec. The USB connection supplies 5 VDC as well as data, and typical consumption is 1.9 W. Line 2 and Line 5 provide bidirectional non-isolated I/O for synchronized equipment cycles.
MV-CB016-10UC-B V4.0 has the same color sensor and rates on a 32.5 mm × 32.5 mm × 1.6 mm board weighing about 10 g. MV-CB016-10UM-S V4.0 keeps the S-mount mechanics and speed modes but changes to mono output and a typical 1.5 W draw. MV-CB016-10GC-S uses an M12-mount, Gigabit Ethernet and PoE, but tops out at 65.2 fps. Choose according to color channel, mechanical lens interface and host connection.
Specifications
| Product type | 1.6 MP USB 3.0 Board Level Camera |
| Sensor type | CMOS, global shutter |
| Sensor model | Sony® IMX273 |
| Sensor format | 1/2.9″ |
| Resolution | 1440 × 1080 |
| Pixel size | 3.45 μm × 3.45 μm |
| Maximum frame rate | 165.4 fps @1440 × 1080 (ADC 12) 249.1 fps @1440 × 1080 (ADC 8) |
| Mono color | Color |
| Dynamic range | 71.5 dB |
| Exposure time | UltraShort exposure mode: 1 μs to 14 μs Standard exposure mode: 15 μs to 10 sec |
| Gain | 0 dB to 17 dB |
| Data interface | USB 3.0 |
| Digital I/O | Bi-directional non-isolated I/O × 2 (Line 2, Line 5) |
| Lens mount | S-mount |
| Power supply | USB 3.0 power supply |
| Power consumption | Typ. 1.9 W @ 5 VDC |
| Operating temperature | 0 °C to 50 °C (32 °F to 122 °F) |
| Storage temperature | –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 80% RH (no condensation) |
| Dimensions | 35 mm × 35 mm × 8.6 mm (1.4″ × 1.4″ × 0.3″) |
| Weight | Approx. 43.5 g (0.1 lb.) |
| Certification | CE-EMC, KC |
| Compatibility | USB3 Vision, GenICam |
Selection and applications
S-mount color feeder monitoring. Fast pick-and-place observation. Dual-rate strobed acquisition.
Minimum kit: Use the camera with an S-mount lens covering the 1/2.9-inch sensor and a USB 3.0 cable to a host that supplies 5 VDC power.
Nearby in the range: MV-CB016-10UC-B V4.0 — Choose it when the same color sensor and frame rates are required on a 1.6 mm board.; MV-CB016-10UM-S V4.0 — Choose it when mono output is sufficient with the same S-mount and speed modes.; MV-CB016-10GC-S — Choose it for an M12-mount, Gigabit Ethernet and PoE at up to 65.2 fps..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- USB 3.0
- I/O & power cables
- CB board-level IO
FAQ
What lens interface does MV-CB016-10UC-S V4.0 use?
This version integrates an S-mount in a 35 mm × 35 mm × 8.6 mm assembly. The selected lens must cover the 1/2.9-inch IMX273 sensor and match the needed field of view. The camera assembly weighs approximately 43.5 g.
How do ADC 12 and ADC 8 affect MV-CB016-10UC-S V4.0 speed?
The stated maximum is 165.4 fps at 1440 × 1080 in ADC 12 and 249.1 fps at the same resolution in ADC 8. Selection between them is therefore a conversion-mode and acquisition-rate decision rather than a change in image dimensions.
Does MV-CB016-10UC-S V4.0 need a separate power cable?
The specified power source is USB 3.0 at 5 VDC, so the data host also supplies camera power. Typical consumption is 1.9 W. External timing remains available through two bidirectional non-isolated I/O lines.
What motion exposure options are built into MV-CB016-10UC-S V4.0?
The global shutter can use UltraShort exposures from 1 µs to 14 µs for tightly strobed motion. Standard mode covers 15 µs through 10 sec. Maximum full-resolution rate is 165.4 fps in ADC 12 or 249.1 fps in ADC 8.
When does the mono S-mount sibling suit the task better?
MV-CB016-10UM-S V4.0 is the corresponding mono S-mount choice. It retains the 1440 × 1080 resolution and the 165.4/249.1 fps mode limits, while typical power falls from 1.9 W for the color camera to 1.5 W.