Hikrobot MV-CB020-60UC-S

Where the S-mount version belongs

An S-mount package turns the 2 MP high-rate platform into a compact color camera in MV-CB020-60UC-S. Its 1/2.53-inch Stacked BSI CMOS sensor captures 1624 × 1240 Bayer GB 8 through a global shutter at up to 179.9 fps. Pixel pitch is 3.45 µm, and the completed 35 mm × 35 mm × 8.6 mm assembly weighs approximately 30 g.

The camera can inspect color-marked parts in motion, follow feeder events and record rapid actuator sequences. Global shutter timing preserves moving outlines, while exposure from 23 µs to 10 sec spans short illuminated events and static setup work. USB 3.0 supplies 5 VDC and transfers the images; the interface is also compatible with USB 2.0. Typical consumption is 1.6 W, and two bidirectional non-isolated I/O lines support synchronization.

MV-CB020-60UC-B provides the same color output and 179.9 fps ceiling on a 32.5 mm × 32.5 mm × 1.6 mm board for device-defined optics. MV-CB020-60UM-S retains the S-mount and rate but outputs Mono 8 and consumes a typical 1.5 W. For mono imaging with larger 4.5 µm pixels, MV-CB020-61UM-S-F uses a 1/1.7-inch sensor and operates at 99 fps. Select 60UC-S when color, S-mount mechanics and the higher frame rate must coincide.

Specifications

Selection and applications

S-mount color sorting. High-rate feeder monitoring. Global-shutter actuator capture.

Minimum kit: Use the camera with an S-mount lens covering the 1/2.53-inch sensor and a USB 3.0 cable connected to a host that provides 5 VDC power.

Nearby in the range: MV-CB020-60UC-B — Choose it when the same 179.9 fps color imaging must fit a 1.6 mm board.; MV-CB020-60UM-S — Choose it for Mono 8 output with the same S-mount and frame rate.; MV-CB020-61UM-S-F — Choose it for mono 4.5 µm pixels and dual high-full-well or high-sensitivity modes at 99 fps..

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables

USB 3.0

I/O & power cables

CB board-level IO

All accessory families →

FAQ

Which lens interface is built into MV-CB020-60UC-S?

The camera uses an S-mount for its 1/2.53-inch sensor. A suitable S-mount lens must cover the sensor format and provide the field of view required by the installation. The camera body is 35 mm × 35 mm × 8.6 mm.

How does global shutter capture support MV-CB020-60UC-S tasks?

A global shutter exposes the 1624 × 1240 frame on common timing, supporting geometry and color checks on moving parts. Full-resolution Bayer GB 8 acquisition reaches 179.9 fps, and exposure can be set as short as 23 µs.

What cable supplies both data and power to MV-CB020-60UC-S?

USB 3.0 is the image interface and the specified 5 VDC power source. Typical consumption is 1.6 W. The interface is also stated to work with USB 2.0, although acquisition settings must fit the host connection used.

Which environmental limits apply to MV-CB020-60UC-S?

Operation is specified from 0 °C to 50 °C at 20% RH to 80% RH without condensation. Storage extends from −30 °C to 80 °C. These limits define the temperature and moisture conditions for the surrounding equipment.

When should the mono MV-CB020-60UM-S be selected instead?

Select MV-CB020-60UM-S when the S-mount installation needs Mono 8 rather than Bayer GB 8 color. Resolution, 179.9 fps rate, global shutter and dimensions match; typical consumption is 1.5 W for mono and 1.6 W for color.