Board level area camera · CB Series
Hikrobot MV-CB120-10UC-B V4.0
- Warranty
- 36 months
Twelve-megapixel color integration
A 12.2 MP color stream on a 1.6 mm board makes MV-CB120-10UC-B V4.0 a high-detail embedded option. The 1/1.7-inch Sony® IMX226 CMOS sensor uses 1.85 µm pixels, a rolling shutter and 4032 × 3036 output at 30 fps. Images travel over USB 3.0, and the 32.5 mm × 32.5 mm board weighs approximately 10 g.
The camera addresses color feature verification, fine component-presence checks and detailed capture of stationary or motion-controlled subjects. Exposure adjusts from 33 µs to 2 sec and gain from 0 dB to 20 dB. USB 3.0 provides the data path and 5 VDC power at a typical 2 W. Two bidirectional non-isolated I/O points, Line 2 and Line 5, allow frame timing to be coordinated with the device cycle.
MV-CB120-10UC-S V4.0 retains the color IMX226, 4032 × 3036 resolution and 30 fps but adds an M12-mount in a 35 mm × 35 mm × 8.6 mm body. MV-CB120-10UM-B V4.0 keeps the thin board and rate while changing to mono output and a typical 1.5 W draw. MV-CB120-10GM-C is mono, C-mount and Gigabit Ethernet with PoE, delivering 4024 × 3036 at 9.7 fps. Select UC-B when embedded color detail and shallow board depth govern the design.
Specifications
| Product type | 12.2 MP USB 3.0 Board Level Camera |
| Sensor type | CMOS, rolling shutter |
| Sensor model | Sony® IMX226 |
| Sensor format | 1/1.7″ |
| Resolution | 4032 × 3036 |
| Pixel size | 1.85 µm × 1.85 µm |
| Maximum frame rate | 30 fps @4032 × 3036 |
| Mono color | Color |
| Dynamic range | 64.6 dB |
| Exposure time | 33 μs to 2 sec |
| Gain | 0 dB to 20 dB |
| Data interface | USB 3.0 |
| Digital I/O | Bi-directional non-isolated I/O × 2 (Line 2, Line 5) |
| Power supply | USB 3.0 power supply |
| Power consumption | Typ. 2 W @ 5 VDC (USB power supply) |
| Operating temperature | 0 °C to 50 °C (32 °F to 122 °F) |
| Storage temperature | –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 80% RH (no condensation) |
| Dimensions | 32.5 mm × 32.5 mm × 1.6 mm (1.3″ × 1.3″ × 0.1″) |
| Weight | Approx. 10 g (0.02 lb.) |
| Certification | CE-EMC, KC, FCC-SDoC |
| Compatibility | USB3 Vision, GenICam |
Selection and applications
Embedded twelve-megapixel color inspection. Fine component-presence verification. Controlled-motion feature capture.
Minimum kit: Use the camera board with a lens and mechanical mount selected for the 1/1.7-inch sensor, plus a USB 3.0 cable to a host supplying 5 VDC power.
Nearby in the range: MV-CB120-10UC-S V4.0 — Choose it when the 4032 × 3036 color platform needs an integrated M12-mount.; MV-CB120-10UM-B V4.0 — Choose it for mono output at 30 fps on the same 1.6 mm board.; MV-CB120-10GM-C — Choose it for 4024 × 3036 mono imaging over Gigabit Ethernet with PoE and C-mount..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- USB 3.0
- I/O & power cables
- CB board-level IO
FAQ
What full-resolution color rate does MV-CB120-10UC-B V4.0 reach?
The Sony® IMX226 color sensor delivers 4032 × 3036 at 30 fps. It uses a 1/1.7-inch optical format, 1.85 µm pixels and a rolling shutter, with a specified dynamic range of 64.6 dB.
How should motion be controlled for MV-CB120-10UC-B V4.0?
Because the sensor uses a rolling shutter, stationary targets or machine-controlled motion are appropriate where fine geometry matters. The exposure range begins at 33 µs, and two bidirectional I/O lines can coordinate capture timing.
What optical assembly is needed around MV-CB120-10UC-B V4.0?
The lens system must cover the 1/1.7-inch sensor and resolve a 4032 × 3036 image from 1.85 µm pixels. The camera electronics occupy a 32.5 mm × 32.5 mm × 1.6 mm board weighing approximately 10 g.
How does USB 3.0 power MV-CB120-10UC-B V4.0 during operation?
USB 3.0 transports images and supplies 5 VDC power. Typical camera consumption is 2 W. External sequence control is available through Line 2 and Line 5, both bidirectional non-isolated I/O connections.
What changes when selecting the mono MV-CB120-10UM-B V4.0?
The UM-B variant changes the output from color to mono while retaining 4032 × 3036, 30 fps, the IMX226 and the 1.6 mm board. Its typical power is 1.5 W, compared with 2 W for MV-CB120-10UC-B V4.0.