Area camera · CH Series
Hikrobot MV-CH050-90Y1M-NN
- Warranty
- 36 months
Monochrome CoaXPress tasks and neighbors
A 164 fps monochrome stream through Micro-BNC CoaXPress defines MV-CH050-90Y1M-NN. Its Gpixel GMAX3405 global-shutter sensor delivers 2448 × 2048 Mono 8 with 3.4 µm pixels on a 2/3-inch format. This operating point addresses rapid edge, registration and surface checks that depend on intensity detail rather than color.
The exposure interval begins at 2 µs and reaches 10 sec, allowing motion freeze under sufficient light as well as longer static capture. PoCXP supports a single coaxial path for image data and power, with 9 V DC to 24 V DC available separately. Trigger and light coordination can use the isolated input, isolated output and bidirectional line on P7.
MV-CH050-90Y1C-NN adds color while retaining 164 fps, GMAX3405 and Micro-BNC CoaXPress. MV-CH050-90TM-C-NF moves the same monochrome resolution to 10 Gigabit Ethernet at 163.4 fps. MV-CH050-60NM provides a lower-rate 60 fps monochrome option over 2.5 Gigabit Ethernet with PoE. Choose this camera for the 164 fps monochrome CoaXPress path.
Specifications
| Product type | 5 MP CoaXPress Area Scan Camera |
| Sensor type | CMOS, global shutter |
| Sensor model | Gpixel GMAX3405 |
| Sensor format | 2/3″ |
| Resolution | 2448 × 2048 |
| Pixel size | 3.4 µm × 3.4 µm |
| Maximum frame rate | 164 fps @ 2448 × 2048 Mono 8 |
| Mono color | Mono |
| Dynamic range | 59.7 dB |
| Exposure time | 2 μs to 10 sec |
| Gain | 0 dB to 6.1 dB |
| Data interface | CoaXPress with Micro-BNC interface |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2) |
| Lens mount | C-mount |
| Power supply | 9 VDC to 24 VDC, supports PoCXP |
| Power consumption | Typ. 3.3 W @ 12 VDC |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Operating temperature | –10 °C to 50 °C (14 °F to 122 °F) |
| Storage temperature | –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| Dimensions | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″) |
| Weight | Approx. 90 g (0.2 lb.) |
| Certification | CE-EMC, KC |
| Compatibility | CoaXPress, GenICam |
| Cooling | Without fan or heat sink |
Selection and applications
High-rate monochrome edge measurement. Fast contrast-based surface inspection. Triggered registration checks over CoaXPress.
Minimum kit: MV-CH050-90Y1M-NN, a 2/3-inch C-mount lens, a Micro-BNC CoaXPress cable, and either PoCXP or a 9 V DC to 24 V DC supply form the minimum imaging set.
Nearby in the range: MV-CH050-90Y1C-NN — Select it when color is needed at the same 164 fps and resolution.; MV-CH050-90TM-C-NF — Select it for 163.4 fps monochrome output over 10 Gigabit Ethernet.; MV-CH050-60NM — Select it for 60 fps monochrome output over 2.5 Gigabit Ethernet with PoE..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- CoaXPress
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What does the monochrome output provide at the full frame rate?
The camera outputs 2448 × 2048 Mono 8 at up to 164 fps. This format carries intensity information without a Bayer color pattern, matching fast edge, position and contrast-based defect analysis.
How is the CoaXPress cable connected at the camera end?
MV-CH050-90Y1M-NN uses a Micro-BNC CoaXPress interface. The selected coaxial cable must therefore have the matching camera-side connector and connect to a receiving CoaXPress path.
Is a separate power supply mandatory for this camera?
No. PoCXP is supported, so a suitable CoaXPress source can power the camera through the data cable. Separate input from 9 V DC to 24 V DC remains available, with typical consumption of 3.3 W at 12 V DC.
How should a C-mount lens be specified for this model?
The lens must cover the 2/3-inch sensor and resolve the 3.4 µm pitch over 2448 × 2048. The C-mount defines the mechanical connection; scene size and working distance determine focal length.
What environment can the fanless camera operate within?
The camera is listed without a fan or heat sink and operates from -10 °C to 50 °C. Humidity may be 20% to 95% RH without condensation, and IP40 applies after correct lens installation and wiring.