Area camera · CH Series
Hikrobot MV-CH050-90TM-C-NF
- Lead time
- from 5 days
- Warranty
- 36 months
Fast monochrome acquisition in the range
Monochrome output at 163.4 fps makes MV-CH050-90TM-C-NF a high-rate 5 MP network camera. Its Gpixel GMAX3405 sensor combines 2448 × 2048 resolution, 3.4 µm pixels and a global shutter with 10 Gigabit Ethernet. The arrangement serves rapid edge, position and surface analysis when a network data path is preferred to Camera Link or CoaXPress.
Exposure from 2 µs to 10 sec covers short captures of moving material and longer static acquisition. The 6-pin P7 connector provides an isolated input, isolated output and bidirectional non-isolated line for trigger and light timing. A fan manages the 8.0 W typical load at 12 V DC, within an operating range of 0 °C to 50 °C.
MV-CH050-90TC-C-NF retains 163.4 fps and 10 Gigabit Ethernet but adds Bayer color output. MV-CH050-90Y1M-NN delivers a closely matched 164 fps monochrome stream through CoaXPress and Micro-BNC. MV-CH050-60NM runs at 60 fps over 2.5 Gigabit Ethernet with PoE. Choose this model for the GMAX3405 monochrome stream on 10 Gigabit Ethernet.
Specifications
| Shutter | global |
| Sensor model | Gpixel GMAX3405 |
| Nominal optical sensor format | 2/3″ |
| Sensor resolution | 2448×2048 px |
| Maximum frame rate | 163.4 fps @ Mono8, resolution 2448×2048 px |
| Color mode | mono |
| Lens mount | C-mount |
| Data interface | 10GigE (GigE compatible) |
| Sensor technology | CMOS |
| Pixel size | 3.4×3.4 µm |
| Dynamic range | 64.6 dB |
| Signal-to-noise ratio | 39 dB |
| Exposure time | 2…10000000 µs |
| Auto exposure | Off, Once, Continuous, trigger width |
| Gain | 0…6.1 dB |
| Pixel format | Mono8, Mono10, Mono10Packed, Mono12, Mono12Packed |
| Binning | 1x1, 2x2, 4x4 |
| Decimation | 1x1, 2x2, 4x4 |
| Flange focal distance | 17.52 mm |
| Protocol compatibility | GigE Vision; GenICam |
| Communication protocol versions | GigE Vision 2.0 |
| Third party software protocol | GigE Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital I/O connector | P7 6-pin |
| Power supply | 9…24 V |
| Power consumption | 8 W (typical) @ DC, supply voltage 12 V |
| Cooling | fan |
| Ingress protection | IP40 |
| Working temperature | 0…50 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 50×45×68.6 mm |
| Weight | 212 g (approx.) |
| Certification | CE, RoHS, KC |
| Reverse image | horizontal, vertical |
Documents
Selection and applications
High-rate monochrome edge inspection. Fast surface-contrast analysis over 10 Gigabit Ethernet. Triggered position checks at 163.4 fps.
Minimum kit: MV-CH050-90TM-C-NF, a 2/3-inch C-mount lens, a 10 Gigabit Ethernet cable, and a 9 V DC to 24 V DC supply form the minimum imaging set.
Nearby in the range: MV-CH050-90TC-C-NF — Prefer it when color is required at 163.4 fps over 10 Gigabit Ethernet; MV-CH050-90Y1M-NN — Prefer it for 164 fps monochrome acquisition through CoaXPress with Micro-BNC; MV-CH050-60NM — Prefer it for 60 fps monochrome acquisition over 2.5 Gigabit Ethernet with PoE.
Cables and accessories for this model
Compatibility per manufacturer data.
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What inspection data does the Mono 8 output emphasize?
The camera produces 2448 × 2048 Mono 8 images, keeping the output focused on intensity rather than color. This supports edge location, dimensional analysis and contrast-based surface checks at rates up to 163.4 fps.
Can the interface fall back to a Gigabit Ethernet connection?
Yes. The 10 Gigabit Ethernet interface at 10000 Mbit/s is listed as compatible with Gigabit Ethernet at 1000 Mbit/s. The acquisition rate must be configured to remain within the bandwidth of the selected link.
What DC supply range is required by MV-CH050-90TM-C-NF?
The camera is powered from 9 V DC to 24 V DC, with typical consumption of 8.0 W at 12 V DC. The 6-pin P7 connector carries power and also provides one opto-isolated input, one opto-isolated output and one bidirectional non-isolated I/O line.
What optical format must the C-mount lens illuminate?
The lens must cover a 2/3-inch sensor and resolve a 3.4 µm pixel pitch across 2448 × 2048. A C-mount provides the mechanical interface, while focal length follows the required imaged area and working distance.
What protection and humidity conditions apply to the housing?
The housing is rated IP40 when the lens and wiring are installed correctly. Operation is specified at 0 °C to 50 °C and 20% to 95% RH without condensation, with fan cooling listed for the camera.