Area camera · CH Series
Hikrobot MV-CH089-60GC V5.0
- Lead time
- from 5 days
- Warranty
- 36 months
Stacked BSI color inspection over GigE
Stacked BSI color capture in a wide 4096 × 2160 format characterizes MV-CH089-60GC V5.0. The 8.8 MP, 1-inch CMOS sensor uses 3.45 µm pixels and a global shutter, sending Bayer GB 8 images at 13.9 fps through Gigabit Ethernet. It serves broad-area color inspection where PoE network deployment matters more than rapid frame repetition.
Wide parts, material strips and color-coded assemblies can be examined across the 4096-pixel image width. UltraShort exposure covers 10 µs to 19 µs, and standard mode extends from 20 µs to 10 sec. Power can arrive through PoE or from a 9 V DC to 24 V DC source, while the P7 I/O supports triggered acquisition and light timing.
MV-CH089-10GC keeps the same image dimensions and Gigabit Ethernet but uses an IMX267 sensor at 13 fps. MV-CH089-60GM V5.0 is the monochrome partner at 13.9 fps. MV-CH100-60GC adds vertical coverage with a 4096 × 2460 color frame at 11.6 fps. Choose MV-CH089-60GC V5.0 for Stacked BSI color, the wide 2160-line format and PoE.
Specifications
| Shutter | global |
| Nominal optical sensor format | 1″ |
| Sensor resolution | 4096×2160 px |
| Maximum frame rate | 13.9 fps @ BayerGB8, resolution 4096×2160 px |
| Color mode | color |
| Lens mount | C-mount |
| Data interface | GigE (Fast Ethernet compatible) |
| Sensor technology | CMOS, stacked BSI |
| Pixel size | 3.45×3.45 µm |
| Dynamic range | 67.2 dB |
| Signal-to-noise ratio | 44.1 dB |
| Exposure time | 10…19 µs @ ultra-short exposure mode; 20…10000000 µs @ standard exposure mode |
| Auto exposure | Off, Once, Continuous, trigger width |
| Gain | 0…12 dB |
| Pixel format | Mono8, BayerGB8, BayerGB10, BayerGB10Packed, BayerGB12, BayerGB12Packed, RGB8, BGR8, YUV422Packed, YUV422_YUYV_Packed |
| Binning | 1x1, 2x2, 4x4 |
| Decimation | 1x1, 2x2, 4x4 |
| Protocol compatibility | GigE Vision, GenICam |
| Communication protocol versions | GigE Vision 2.0 |
| Third party software protocol | GigE Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (32/64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital I/O connector | P7 6-pin |
| Power supply | 9…24 V |
| Power delivery | external power supply, PoE |
| PoE support | yes |
| Power consumption | 1.8 W (typical) @ DC, supply voltage 12 V |
| Ingress protection | IP40 @ with lens and cables properly installed |
| Working temperature | -10…50 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 29×29×42 mm (without lens) |
| Weight | 100 g (approx.) |
| Certification | CE, RoHS, KC |
| Reverse image | horizontal, vertical |
Documents
Selection and applications
Wide color inspection through a PoE node. Triggered checks of broad colored assemblies. Networked material-strip inspection.
Minimum kit: MV-CH089-60GC V5.0, a 1-inch C-mount lens, a Gigabit Ethernet cable, and either PoE or a 9 V DC to 24 V DC supply form the minimum imaging set.
Nearby in the range: MV-CH089-10GC — Use it for an IMX267 color sensor and 13 fps over Gigabit Ethernet; MV-CH089-60GM V5.0 — Use it when the same 4096 × 2160 Stacked BSI platform should output monochrome data; MV-CH100-60GC — Use it for a taller 4096 × 2460 color frame at 11.6 fps over Gigabit Ethernet.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- GigE
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What full-frame rate does the Stacked BSI color sensor reach?
The camera produces up to 13.9 fps at 4096 × 2160 in Bayer GB 8. That stream travels over 1000 Mbit/s Gigabit Ethernet, with compatibility also listed for 100 Mbit/s Fast Ethernet.
How can MV-CH089-60GC V5.0 receive electrical power?
It supports PoE and a separate 9 V DC to 24 V DC input. PoE can combine data and power on the network cable; typical camera consumption is 1.8 W when supplied at 12 V DC.
Which exposure ranges are available for color acquisition?
UltraShort mode runs from 10 µs to 19 µs, while standard exposure begins at 20 µs and reaches 10 sec. The global shutter applies the chosen interval to the complete image simultaneously.
What optical coverage should the C-mount lens provide?
The lens should cover the camera's 1-inch sensor and resolve 3.45 µm pixels across 4096 × 2160. Its focal length is selected from the target width and working distance, while C-mount defines attachment.
What physical envelope and ingress rating affect installation?
Without a lens, the body measures 29 mm × 29 mm × 42 mm and weighs approximately 100 g. IP40 applies with correct lens installation and wiring, and operation is specified from -10 °C to 50 °C.