Area camera · CH Series
Hikrobot MV-CH100-60GC
- Warranty
- 36 months
Taller color coverage in a PoE system
A 4096 × 2460 color image gives MV-CH100-60GC more vertical coverage than the 2160-line CH089 models. Its 10.1 MP, 1-inch Stacked BSI sensor uses 3.45 µm pixels and a global shutter, with Bayer GR 8 output at 11.6 fps over Gigabit Ethernet. The camera suits detailed color inspection of broad parts that also need added image height.
PoE can carry power together with the network data, or the camera can accept 9 V DC to 24 V DC. Exposure spans 80 µs to 10 sec, and the global shutter supports geometry retention between moving frames. The P7 connection provides isolated input and output plus one bidirectional line for part-triggered acquisition and illumination control.
MV-CH089-60GC V5.0 runs at 13.9 fps with a shorter 4096 × 2160 color image on Gigabit Ethernet. MV-CH100-60UC keeps the 4096 × 2460 Stacked BSI color format and reaches 36 fps through USB 3.0. MV-CH120-10GC increases height to 3000 pixels at 9.4 fps over Gigabit Ethernet. Choose this model for the intermediate 2460-line frame and PoE.
Specifications
| Product type | 10.1 MP GigE Area Scan Camera |
| Sensor type | CMOS, global shutter |
| Sensor model | Stacked BSI |
| Sensor format | 1″ |
| Resolution | 4096 × 2460 |
| Pixel size | 3.45 µm × 3.45 µm |
| Maximum frame rate | 11.6 fps @ 4096 × 2460 Bayer GR 8 |
| Mono color | Color |
| Dynamic range | 58.2 dB |
| Exposure time | 80 μs to 10 sec |
| Gain | 0 dB to 24 dB |
| Data interface | Gigabit Ethernet (1000 Mbit/s), compatible with Fast Ethernet (100 Mbit/s) |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Lens mount | C-mount |
| Power supply | 9 VDC to 24 VDC, supports PoE |
| Power consumption | Typ. 3.0 W @ 12 VDC |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Operating temperature | –10 °C to 50 °C (14 °F to 122 °F) |
| Storage temperature | –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| Dimensions | 29 mm × 44 mm × 59 mm (1.1″ × 1.7″ × 2.3″) |
| Weight | Approx. 92 g (0.2 lb.) |
| Certification | CE-EMC, KC |
| Compatibility | GigE Vision V2.0, GenICam |
Selection and applications
Taller color inspection of broad parts. PoE verification of colored assemblies. Triggered geometry checks at 11.6 fps.
Minimum kit: MV-CH100-60GC, a 1-inch C-mount lens, a Gigabit Ethernet cable, and either PoE or a 9 V DC to 24 V DC supply form the minimum imaging set.
Nearby in the range: MV-CH089-60GC V5.0 — Choose it for a wider 4096 × 2160 color shape at 13.9 fps over Gigabit Ethernet.; MV-CH100-60UC — Choose it for the same 4096 × 2460 color image at 36 fps over USB 3.0.; MV-CH120-10GC — Choose it for a taller 4096 × 3000 color image at 9.4 fps over Gigabit Ethernet..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- GigE
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What image dimensions and color format are available at full rate?
MV-CH100-60GC outputs 4096 × 2460 Bayer GR 8 at up to 11.6 fps. The 1-inch Stacked BSI sensor uses 3.45 µm pixels and a global shutter for simultaneous exposure.
Can the Gigabit Ethernet connection also power the camera?
Yes, PoE is supported. Data and power can share the network cable with a suitable source, or a separate 9 V DC to 24 V DC input can be used. Typical consumption is 3.0 W at 12 V DC.
Which lens coverage matches the 10.1 MP sensor format?
Use a C-mount lens covering the 1-inch format and resolving the 3.45 µm pitch across 4096 × 2460. The optical magnification must map the required target width and height into that image.
What does the 80 µs minimum exposure imply for motion capture?
The exposure range begins at 80 µs and extends to 10 sec. Because the sensor has a global shutter, geometry is captured simultaneously; motion blur still depends on target speed, exposure and illumination.
What body size and environmental range should mounting allow?
The camera measures 29 mm × 44 mm × 59 mm and weighs approximately 92 g. Operation is specified from -10 °C to 50 °C, with IP40 applying after correct lens installation and wiring.