Area camera · CH Series
Hikrobot MV-CH120-10GC V4.0
Active revision: MV-CH120-10GC V4.0 · PN 306301985 / 306302889
- Lead time
- from 5 days
- Warranty
- 36 months
PoE color inspection at 12.3 MP
Networked 12.3 MP color acquisition is the purpose of MV-CH120-10GC. Its 1.1-inch Sony IMX304 global-shutter CMOS sensor delivers 4096 × 3000 at 9.9 fps through Gigabit Ethernet. With 3.45 µm pixels, a C-mount and PoE, the camera fits detailed color inspection of large assemblies or patterns at a moderate acquisition rate.
The global shutter supports triggered capture when targets move between frames. UltraShort exposure spans 2 µs to 14 µs, and standard exposure runs from 15 µs to 10 sec. Power can share the Gigabit Ethernet cable through PoE or enter at 9–24 V DC, while the 6-pin P7 connection provides trigger and output lines.
MV-CH120-11UC retains the IMX304 and 4096 × 3000 color image but reaches 30.3 fps over USB 3.0. MV-CH120-10CC changes to IMX253 and Camera Link, delivering 51.4 fps in its full-width mode. MV-CH100-60GC uses Stacked BSI and a shorter 4096 × 2460 color image at 11.6 fps over Gigabit Ethernet. Choose MV-CH120-10GC for the taller frame and PoE topology.
Available versions
One device, different revisions. We ship the current one by default; if a specific revision is already installed on your line, name it in the request and we will match it.
| Part number | PN | Version | |
|---|---|---|---|
| MV-CH120-10GC discontinued | 306300363 / 306300364 | — | |
| MV-CH120-10GC V4.0 | 306301985 / 306302889 | V4.0 |
Specifications
| Shutter | global |
| Sensor model | Sony® IMX304 |
| Nominal optical sensor format | 1.1″ |
| Sensor resolution | 4096×3000 px |
| Maximum frame rate | 9.9 fps @ BayerRG8, resolution 4096×3000 px |
| Color mode | color |
| Lens mount | C-mount |
| Data interface | GigE (Fast Ethernet compatible) |
| Sensor technology | CMOS |
| Pixel size | 3.45×3.45 µm |
| Dynamic range | 70.4 dB |
| Signal-to-noise ratio | 40 dB |
| Exposure time | 2…14 µs @ ultra-short exposure mode; 15…10000000 µs @ standard exposure mode |
| Auto exposure | Off, Once, Continuous |
| Gain | 0…24 dB |
| Pixel format | Mono8, Mono10, Mono12, BayerRG8, BayerRG10, BayerRG10Packed, BayerRG12, BayerRG12Packed, RGB8, BGR8, YUV422Packed, YUV422_YUYV_Packed |
| Binning | 1x1, 2x2, 4x4 |
| Decimation | 1x1, 2x2, 4x4 |
| Protocol compatibility | GigE Vision, GenICam |
| Communication protocol versions | GigE Vision 2.0 |
| Third party software protocol | GigE Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital I/O connector | P7 6-pin |
| Power supply | 9…24 V |
| Power delivery | external power supply, PoE |
| PoE support | yes |
| Power consumption | 3 W (typical) @ DC, supply voltage 12 V |
| Ingress protection | IP40 |
| Working temperature | -10…50 °C |
| Storage temperature | -30…70 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 29×29×42 mm |
| Weight | 100 g |
| Certification | CE, RoHS, KC |
| Reverse image | horizontal, vertical |
Documents
Discontinued revisions — installed camera identification
MV-CH120-10GC · PN 306300363 / 306300364
| Maximum frame rate | 9.4 fps @ resolution 4096×3000 px |
| Dynamic range | 72.2 dB |
| Signal-to-noise ratio | 40.2 dB |
| Gain | 0…20 dB |
| Pixel format | Mono8, Mono10, Mono12, BayerGR8, BayerGR10, BayerGR10p, BayerGR12, BayerGR12p, RGB8, BGR8, YUV422Packed, YUV422_YUYV_Packed |
| Binning | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Decimation | 1x1, 1x2, 2x1, 2x2 |
| Digital I/O connector | Hirose 6-pin |
| Power supply | 12 V |
| Power consumption | 4.6 W (typical) @ DC, supply voltage 12 V |
| Ingress protection | IP30 |
| Working temperature | 0…50 °C |
| Humidity | 20…80 % @ non-condensing |
| Dimensions | 44×29×59 mm |
| Weight | 140 g (approx.) |
Selection and applications
PoE color inspection of large assemblies. Detailed pattern checks at 12.3 MP. Triggered capture of moving color targets.
Minimum kit: MV-CH120-10GC, a 1.1-inch C-mount lens, a Gigabit Ethernet cable, and either PoE or a 9–24 V DC supply form the minimum imaging set.
Nearby in the range: MV-CH120-11UC — Choose it for 4096 × 3000 IMX304 color output at 30.3 fps over USB 3.0; MV-CH120-10CC — Choose it for 4096 × 3000 IMX253 color output at 51.4 fps over Camera Link; MV-CH100-60GC — Choose it for a 4096 × 2460 Stacked BSI color image at 11.6 fps over Gigabit Ethernet.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- GigE
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What full-resolution frame rate is available over GigE?
The camera outputs 4096 × 3000 color images at up to 9.9 fps over 1000 Mbit/s Gigabit Ethernet. The interface is also listed as compatible with 100 Mbit/s Fast Ethernet.
Can MV-CH120-10GC combine power and data on one cable?
Yes, PoE is supported over the Ethernet connection. A separate 9–24 V DC supply is also permitted, and typical consumption is 3.0 W at 12 V DC, allowing either network-powered or separately powered installation.
Which C-mount optics cover the 1.1-inch IMX304 sensor?
The lens must use C-mount, cover the 1.1-inch sensor and resolve 3.45 µm pixels across 4096 × 3000. Focal length should map the required large inspection area onto the full image.
What exposure controls support triggered moving targets?
UltraShort exposure is available from 2 µs to 14 µs, followed by standard exposure from 15 µs to 10 sec. The IMX304 global shutter applies the interval simultaneously across the image.
What environmental conditions are specified for this camera?
Operation is specified from –10 °C to 50 °C at 20% RH to 95% RH without condensation. IP40 applies with correct lens installation and wiring, so the mounting environment must respect that protection level.