Area camera · CH Series
Hikrobot MV-CH250-90GM V4.0
- Warranty
- 36 months
Applications and positioning
Square, high-detail monochrome imaging defines the MV-CH250-90GM V4.0. Its 26.2 MP Gpixel GMAX0505 CMOS sensor records 5120 × 5120 pixels with a global shutter and 2.5 µm pixels. Full-resolution Mono 8 output reaches 4.5 fps over Gigabit Ethernet, placing the camera in inspection stations where spatial detail matters more than rapid sequence capture.
The square frame suits components that need similar sampling in both axes, including indexed parts, flat assemblies, and alignment targets. Global exposure keeps geometry consistent while an object is briefly in motion, while the 12 μs to 10 sec exposure range covers short strobed captures and long integration. PoE can combine data and power on the network run; a 6-pin P7 connection provides the trigger and output lines.
MV-CH250-90GN V4.0 keeps the 4.5 fps GigE format but changes the response to near-infrared and uses IP30 rather than IP40. MV-CH250-90UM V4.0 raises full-frame monochrome acquisition to 14 fps through USB 3.0. For 41.5 fps and 10 Gigabit Ethernet, MV-CH250-90TM-C-NF is the faster C-mount monochrome route, with a larger fan-cooled body.
Specifications
| Product type | 26.2 MP GigE Area Scan Camera |
| Sensor type | CMOS, global shutter |
| Sensor model | Gpixel GMAX0505 |
| Sensor format | 1.1″ |
| Resolution | 5120 × 5120 |
| Pixel size | 2.5 µm × 2.5 µm |
| Maximum frame rate | 4.5 fps @ 5120 × 5120 Mono 8 |
| Mono color | Mono |
| Dynamic range | 63 dB |
| Exposure time | 12 μs to 10 sec |
| Gain | 0 dB to 24 dB |
| Data interface | Gigabit Ethernet (1000 Mbit/s), compatible with Fast Ethernet (100 Mbit/s) |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Lens mount | C-mount |
| Power supply | 9 VDC to 24 VDC, supports PoE |
| Power consumption | Typ. 3.1 W @ 12 VDC |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Operating temperature | 0 °C to 50 °C (32 °F to 122 °F) |
| Storage temperature | –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| Dimensions | 29 mm × 44 mm × 59 mm (1.1″ × 1.7″ × 2.3″) |
| Weight | Approx. 100 g (0.2 lb.) |
| Certification | CE-EMC, KC |
| Compatibility | GigE Vision V2.0, GenICam |
Selection and applications
Indexed-part dimensional inspection. Square-frame assembly verification. Monochrome alignment target capture.
Minimum kit: Start with the camera, a C-mount lens covering the 1.1-inch sensor, a Gigabit Ethernet cable, and either PoE or a 9–24 V DC supply.
Nearby in the range: MV-CH250-90GN V4.0 — Choose it when the same 5120 × 5120 GigE format is needed with near-infrared response.; MV-CH250-90UM V4.0 — Choose it for monochrome USB 3.0 acquisition at 14 fps.; MV-CH250-90TM-C-NF — Choose it for C-mount monochrome capture at 41.5 fps over 10 Gigabit Ethernet..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- GigE
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What image format and rate does MV-CH250-90GM V4.0 deliver?
The Gpixel GMAX0505 produces 5120 × 5120 monochrome frames. At full resolution in Mono 8, the maximum listed rate is 4.5 fps. That combination emphasizes dense two-dimensional sampling rather than rapid frame succession.
How does the global shutter help this GigE camera with motion?
The CMOS sensor uses a global shutter, so the whole frame shares one exposure interval instead of being read as a moving time slice. Exposure can be set from 12 μs to 10 sec, allowing short strobed captures when indexed parts have residual motion.
Can data and power share the network cable on this model?
Yes. The camera supports PoE on its Gigabit Ethernet connection, which is also compatible with Fast Ethernet. Where separate power is preferred, the accepted supply range is 9 V DC to 24 V DC; typical consumption is 3.1 W at 12 V DC.
What lens interface and sensor coverage are required here?
The optical interface is C-mount and the sensor format is 1.1 inch. Select a C-mount lens whose image circle covers that format and whose resolving performance matches the 2.5 µm pixel pitch across the 5120 × 5120 frame.
What installation environment suits MV-CH250-90GM V4.0?
The housing is rated IP40 when the lens and wiring are installed correctly. Operation is specified from 0 °C to 50 °C, with 20% RH to 95% RH and no condensation. The camera body measures 29 mm × 44 mm × 59 mm and weighs about 100 g.