Area camera · CH Series
Hikrobot MV-CH250-90TM-C-NF
- Lead time
- from 5 days
- Warranty
- 36 months

Applications and neighbours
Fast monochrome transfer over an Ethernet topology is the core role of MV-CH250-90TM-C-NF. Its Gpixel GMAX0505 global-shutter CMOS array supplies 5120 × 5120 Mono 8 frames at 41.5 fps through 10 Gigabit Ethernet. The 1.1-inch sensor, 2.5 µm sampling, and C-mount combine dense square images with a familiar optical connection.
At production speed, the camera can inspect moving parts, measure repeated features, or capture registration marks while the global exposure holds geometry across the frame. UltraShort exposure spans 3 μs to 8 μs for intense strobed illumination; standard settings extend from 9 μs to 10 sec. A fan manages the 74 mm enclosure, and the P10 connection exposes isolated trigger input and output, a bidirectional line, and RS-232.
MV-CH250-90TM-M58S-NF matches the monochrome output, 41.5 fps, and interface but substitutes an M58 × 0.75 mount. MV-CH250-90TC-M58S-NF adds Bayer BG 8 color with that M58 mount. MV-CH250-92TM-C-NF V2.0 is the closest C-mount monochrome alternative at the same rate, packaged in a smaller 50 mm × 45 mm × 68.6 mm fan-cooled body.
Specifications
| Shutter | global |
| Sensor model | Gpixel GMAX0505 |
| Nominal optical sensor format | 1.1″ |
| Sensor resolution | 5120×5120 px |
| Maximum frame rate | 41.5 fps @ Mono8, resolution 5120×5120 px |
| Color mode | mono |
| Lens mount | C-mount |
| Data interface | 10GigE (GigE compatible) |
| Sensor technology | CMOS |
| Pixel size | 2.5×2.5 µm |
| Dynamic range | 63 dB |
| Signal-to-noise ratio | 36 dB |
| Exposure time | 3…8 µs @ ultra-short exposure mode; 9…10000000 µs @ standard exposure mode |
| Auto exposure | Off, Once, Continuous |
| Linear gain factor | 2…5 |
| Pixel format | Mono8, Mono10, Mono10Packed, Mono12, Mono12Packed |
| Binning | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Decimation | 1x1, 1x2, 1x4, 2x1, 2x2, 2x4, 4x1, 4x2, 4x4 |
| Protocol compatibility | GigE Vision; GenICam |
| Communication protocol versions | GigE Vision 2.0 |
| Third party software protocol | GigE Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital I/O connector | P10 12-pin |
| Power supply | 9…24 V |
| Power consumption | 9.7 W (typical) @ DC, supply voltage 12 V |
| Cooling | fan |
| Ingress protection | IP40 |
| Working temperature | 0…50 °C |
| Storage temperature | -30…70 °C |
| Humidity | 20…95 % |
| Dimensions | 74×74×78.8 mm |
| Weight | 590 g (approx.) |
| Certification | CE, RoHS, KC |
| Port inventory | RS-232 (serial) |
| Reverse image | horizontal, vertical |
Documents
Selection and applications
Fast monochrome part inspection. Triggered feature measurement. High-detail registration capture.
Minimum kit: The minimum setup is the camera, a C-mount lens for the 1.1-inch sensor, a 10 Gigabit Ethernet cable and host connection, and a 9–24 V DC source.
Nearby in the range: MV-CH250-90TM-M58S-NF — Use it when the same monochrome stream is needed with an M58 × 0.75 lens; MV-CH250-90TC-M58S-NF — Use it when Bayer BG 8 color output is required at 41.5 fps; MV-CH250-92TM-C-NF V2.0 — Use it for the same C-mount Mono 8 rate in a smaller fan-cooled enclosure.
Cables and accessories for this model
Compatibility per manufacturer data.
- I/O & power cables
- 12-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
How much monochrome data can MV-CH250-90TM-C-NF acquire?
At full 5120 × 5120 resolution, the camera outputs Mono 8 at up to 41.5 fps. The source is a 26.2 MP Gpixel GMAX0505 with 2.5 µm pixels and a global shutter, so the frame combines fine sampling with simultaneous exposure.
Which exposure range is available for motion arrest?
UltraShort operation provides exposures from 3 μs to 8 μs, while standard operation runs from 9 μs to 10 sec. The global shutter exposes all pixels together, supporting geometrically consistent images of moving or indexed objects.
Can the 10 Gigabit Ethernet interface run at a lower link rate?
Yes. The data interface is 10 Gigabit Ethernet at 10000 Mbit/s and is compatible with Gigabit Ethernet at 1000 Mbit/s. The selected link rate and image settings determine how much of the 41.5 fps full-frame capability can be transported.
What power and I/O connections are used by this variant?
Supply voltage is 9 V DC to 24 V DC, with typical draw of 9.7 W at 12 V DC. A 12-pin P10 connector carries power and I/O, including one isolated input, one isolated output, one bidirectional non-isolated line, and one RS-232 channel.
How does the C-mount version differ from its M58 neighbour?
MV-CH250-90TM-C-NF and MV-CH250-90TM-M58S-NF share 5120 × 5120 Mono 8 output at 41.5 fps over 10 Gigabit Ethernet and have the same 74 mm × 74 mm × 78.8 mm dimensions. This model uses C-mount and weighs about 590 g; its neighbour uses M58 × 0.75 and weighs about 550 g.