Area camera · CH Series
Hikrobot MV-CH250-90TM-M58S-NF
- Warranty
- 36 months
Selection context and use cases
An M58 lens interface and fast monochrome output set MV-CH250-90TM-M58S-NF apart within the 26.2 MP group. The Gpixel GMAX0505 global-shutter sensor captures 5120 × 5120 Mono 8 images at 41.5 fps. A 10 Gigabit Ethernet connection carries the stream, while the 2.5 µm pixel pitch supports fine sampling across the square 1.1-inch sensor.
This profile fits repeated dimensional checks, edge analysis, and surface inspection on moving components where color is unnecessary. Exposure can drop to 3 μs in UltraShort mode, helping a strobe arrest motion; standard exposure extends to 10 sec. The fan-cooled housing accepts 9–24 V DC, and the 12-pin P10 interface provides trigger and output lines plus RS-232 for coordinated acquisition.
MV-CH250-90TM-C-NF retains Mono 8, 41.5 fps, and 10 Gigabit Ethernet in the same outer dimensions but changes to C-mount and weighs about 590 g rather than 550 g. MV-CH250-90TC-M58S-NF keeps M58 × 0.75 and the same rate while providing color. MV-CH250-90Y2M-C-NF reaches 85 fps in mono over Micro-BNC CoaXPress with C-mount.
Specifications
| Product type | 26.2 MP 10 GigE Area Scan Camera |
| Sensor type | CMOS, global shutter |
| Sensor model | Gpixel GMAX0505 |
| Sensor format | 1.1″ |
| Resolution | 5120 × 5120 |
| Pixel size | 2.5 µm × 2.5 µm |
| Maximum frame rate | 41.5 fps @ 5120 × 5120 Mono 8 |
| Mono color | Mono |
| Dynamic range | 63 dB |
| Exposure time | UltraShort exposure mode: 3 μs to 8 μs Standard exposure mode: 9 μs to 10 sec |
| Gain | 2.0x to 5.0x |
| Data interface | 10 Gigabit Ethernet (10000 Mbit/s), compatible with Gigabit Ethernet (1000 Mbit/s) |
| Digital I/O | 12-pin P10 connector provides power and I/O, including opto -isolated input × 1 (Line 0), opto -isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2), and RS-232 × 1 |
| Lens mount | M58 × 0.75 |
| Power supply | 9 VDC to 24 VDC |
| Power consumption | Typ. 9.7 W @ 12 VDC |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Operating temperature | 0 °C to 50 °C (32 °F to 122 °F) |
| Storage temperature | –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| Dimensions | 74 mm × 74 mm × 78.8 mm (2.9″ × 2.9″ × 3.1″) |
| Weight | Approx. 550 g (1.2 lb.) |
| Certification | CE-EMC, KC |
| Compatibility | GigE Vision V2.0, GenICam |
| Cooling | With fan |
Selection and applications
Monochrome conveyor feature measurement. Strobed square-frame inspection. High-rate edge and surface analysis.
Minimum kit: Use the camera with an M58 × 0.75 lens covering the 1.1-inch sensor, a 10 Gigabit Ethernet cable and host port, and a 9–24 V DC power source.
Nearby in the range: MV-CH250-90TM-C-NF — Choose this counterpart for C-mount optics with the same 41.5 fps Mono 8 output.; MV-CH250-90TC-M58S-NF — Choose this counterpart for Bayer BG 8 color through the same M58 mount.; MV-CH250-90Y2M-C-NF — Choose it for monochrome 85 fps acquisition over Micro-BNC CoaXPress..
Cables and accessories for this model
Compatibility per manufacturer data.
- I/O & power cables
- 12-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What distinguishes MV-CH250-90TM-M58S-NF optically?
The camera uses an M58 × 0.75 mount rather than C-mount. Its lens must cover the 1.1-inch Gpixel GMAX0505 sensor and resolve a 2.5 µm pitch across 5120 × 5120 pixels; focal length follows the required object coverage and working distance.
What monochrome rate is available at the full square frame?
Full-resolution Mono 8 output is specified at up to 41.5 fps. The 5120 × 5120 array provides 26.2 MP per frame, and the global shutter makes that rate applicable to moving-part capture without sequential row exposure.
How should the 10 Gigabit Ethernet path be provisioned?
The camera presents a 10000 Mbit/s 10 Gigabit Ethernet interface and can also operate at 1000 Mbit/s Gigabit Ethernet. To retain the full 41.5 fps stream, size the receiving interface and processing path for the selected Mono 8 image flow.
What electrical supply and control lines does the camera need?
Power input spans 9 V DC to 24 V DC, with typical consumption of 9.7 W at 12 V DC. The P10 connector has one isolated input, one isolated output, one bidirectional non-isolated line, and an RS-232 channel for control integration.
What does fan cooling mean for installation planning?
The camera includes a fan and occupies 74 mm × 74 mm × 78.8 mm. Its working range is 0 °C to 50 °C, and IP40 applies when lens and wiring are installed correctly. Allow the housing and its cooling path appropriate space in the station.