Line scan camera · CL082 series
Hikrobot MV-CL082-92GM
- Warranty
- 36 months
Monochrome Gigabit Ethernet applications
An 8192 × 2 monochrome CMOS line with 1-line and 2-TDI operation positions MV-CL082-92GM for Ethernet-connected line inspection. Its pixels are 7 x 7 um. The standard Mono 8 rate is 14 kHz, while the high-bandwidth mode reaches 50 kHz over Gigabit Ethernet. The two acquisition modes allow the system to retain 8192-pixel coverage while selecting single-line or TDI capture for the moving target.
The camera accepts 12 to 24 VDC and has a typical draw of 6.8 W. Its M72 x 0.75 lens mount supports optics for the full sensor line. The housing measures 76 x 76 x 46.7 mm, weighs 400 g and carries an IP40 rating. Operation is stated from -20 to 50 C at 5 to 90 % RH. These mechanical and environmental values bound mounting, enclosure and power design around the Gigabit Ethernet link.
MV-CL082-92GM doubles the line length of MV-CL043-A1GM-V2 and raises high-bandwidth operation to 50 kHz, though the 4096 × 3 camera adds 3-TDI and uses the smaller M42*1.0 mount. MV-CL084-91GM keeps Gigabit Ethernet but moves to an 8192 × 4 sensor with 5 μm pixels and 4-TDI, reaching 29.8 kHz in high-bandwidth Mono 8. MV-CL084-B1NM also uses 8192 × 4, with 2.5 Gigabit Ethernet and a 75.6 kHz peak in Mono 8 and 1-Line.
Available versions
One device, different revisions. We ship the current one by default; if a specific revision is already installed on your line, name it in the request and we will match it.
| Part number | PN | Version | |
|---|---|---|---|
| MV-CL082-92GM | 306302379 | — | |
| MV-CL082-92GM V2.0 | 306303805 | V2.0 |
Specifications
| Sensor type | CMOS |
| Resolution | 8192 × 2 px |
| Pixel size | 7 × 7 um |
| Mono color | Mono |
| Data interface | Gigabit Ethernet |
| Lens mount | M72 × 0.75 |
| Power supply | 12 to 24 VDC |
| Power consumption typ | 6.8 W |
| Ingress protection | IP40 |
| Operating temperature | -20 to 50 C |
| Humidity | 5 to 90 % RH |
| Dimensions | 76 × 76 × 46.7 mm |
| Weight | 400 g |
| Image mode | 1-line, 2-TDI |
| Max line rate standard mono8 | 14 kHz |
| Max line rate high bandwidth | 50 kHz |
Selection and applications
8192-pixel monochrome web inspection. 2-TDI Gigabit Ethernet capture. High-bandwidth scanning at 50 kHz.
Minimum kit: Use MV-CL082-92GM with an M72 x 0.75 lens covering the 8192-pixel line, a Gigabit Ethernet cable, and a separate 12 to 24 VDC supply.
Nearby in the range: MV-CL043-A1GM-V2 — Choose it for a 4096 × 3 sensor, 3-TDI mode and an M42*1.0 lens mount.; MV-CL084-91GM — Choose it when 8192 × 4 monochrome capture and 4-TDI are needed.; MV-CL084-B1NM — Choose it for 2.5 Gigabit Ethernet and a 75.6 kHz Mono 8 peak..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- GigE
- Power
- Power
- Mounting
- Camera mounts
FAQ
Which rate applies to standard Mono 8 on MV-CL082-92GM?
The standard Mono 8 maximum is 14 kHz. High-bandwidth operation raises the listed maximum to 50 kHz, with both rates carried over the Gigabit Ethernet data interface.
Can MV-CL082-92GM switch between single-line and TDI capture?
Yes. Its 8192 x 2 monochrome CMOS sensor supports both 1-line and 2-TDI image modes. The pixel size is 7 x 7 um across the 8192-pixel line, and high-bandwidth rate reaches 50 kHz.
What electrical load should be allowed for MV-CL082-92GM?
The accepted supply range is 12 to 24 VDC and typical power consumption is 6.8 W. Image data uses Gigabit Ethernet, so both that data cable and the stated power feed are needed.
What lens thread is used by the MV-CL082-92GM camera?
The lens connection is M72 x 0.75. Optics should be selected to cover the 8192-pixel sensor line with its 7 x 7 um pixels and to fit the stated mount directly.
Which physical limits define an MV-CL082-92GM installation?
The body is 76 x 76 x 46.7 mm and weighs 400 g. It is rated IP40, works from -20 to 50 C, and permits humidity from 5 to 90 % RH. Image data uses Gigabit Ethernet.