Line scan camera · CL084 series

Hikrobot MV-CL084-B1NM

8192 × 42.5 Gigabit EthernetIP40
Price on requestAn engineer will confirm pricing and lead time in the first reply.
Warranty
36 months
Find the right model
Hikrobot MV-CL084-B1NM

2.5 Gigabit Ethernet speed and modes

Higher-rate Ethernet line capture is the focus of MV-CL084-B1NM. Its monochrome CMOS sensor is 8192 × 4 with 7 × 7 μm pixels and selectable 1-Line, 2-TDI and 4-TDI modes. At full resolution, Mono 8 reaches 37.6 kHz in 1-Line or 2-TDI and 34 kHz in 4-TDI; Mono 10/12 reaches 18.8 kHz. The 2.5 Gigabit Ethernet link is also compatible with 1000 Mbit/s and 100 Mbit/s connections.

Rate-focused configurations include a 75.6 kHz peak for Mono 8 in 1-Line, plus 90 kHz after ROI at 3424 pixels or below. Four bidirectional P10 I/O lines are configurable and support single-ended or differential signaling. The camera accepts 12 VDC to 24 VDC and consumes 6.7 W. It uses an M72 *0.75 mount with a 12 mm flange focal length, while the 76 mm × 76 mm × 41.9 mm housing weighs 350 g.

MV-CL084-B1NM is the faster network counterpart to MV-CL084-91GM. Both offer 8192 × 4 and 4-TDI, but the 91GM uses 5 μm pixels and Gigabit Ethernet, reaching 29.8 kHz in high-bandwidth Mono 8. MV-CL082-92GM has only two sensor rows yet reaches 50 kHz in its Gigabit Ethernet high-bandwidth mode. MV-CL081-B0F2M keeps 8192-pixel resolution but uses a single-row sensor and 2LC fiber transport to reach 240 kHz.

Specifications

Sensor typeCMOS
Resolution8192 × 4
Pixel size7 × 7 μm
Mono colorMono
Dynamic range63.9 dB
SNR41.6 dB
Data interface2.5 Gigabit Ethernet (2500 Mbit/s), compatible with Gigabit Ethernet (1000 Mbit/s) and Fast Ethernet (100 Mbit/s)
Digital I/O12-pin P10 connector; bi-directional configurable I/O × 4; single-ended/differential
Lens mountM72 *0.75
Power supply12 VDC to 24 VDC
Power consumption6.7 W
Ingress protectionIP40
Operating temperature–20 to 55 °C
Storage temperature–30 to 80 °C
Humidity20% to 80% RH
Dimensions76 mm × 76 mm × 41.9 mm
Weight350 g
CompatibilityGigE Vision V2.0, GenICam
Image mode1-Line, 2-TDI, 4-TDI
Max line rate (full resolution)37.6 kHz @ Mono 8 (1-Line, 2-TDI); 34 kHz @ Mono 8 (4-TDI); 18.8 kHz @ Mono 10/12 (1-Line, 2-TDI, 4-TDI)
Max line rate (after roi)90 kHz @ Mono 8 & 1-Line (3424 P and below)
Peak line rate75.6 kHz @ Mono 8 & 1-Line
Flange focal length12 mm

Selection and applications

2.5 Gigabit Ethernet line inspection. 8192-pixel 4-TDI acquisition. Reduced-width scanning at 90 kHz.

Minimum kit: Use MV-CL084-B1NM with an M72 *0.75 lens, a 2.5 Gigabit Ethernet cable, and a 12 VDC to 24 VDC feed through the 12-pin P10 connection.

Nearby in the range: MV-CL084-91GM — Choose it for an 8192 × 4, 5 μm sensor on a Gigabit Ethernet link.; MV-CL082-92GM — Choose it when an 8192 × 2 monochrome sensor and 2-TDI are sufficient.; MV-CL081-B0F2M — Choose it for 1-Line capture at up to 240 kHz over a 2LC fiber connector..

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables
GigE
Power
Power

All accessory families →

FAQ

What full-resolution rates does MV-CL084-B1NM provide in Mono 8?

At full 8192-pixel width, Mono 8 reaches 37.6 kHz in 1-Line and 2-TDI modes, and 34 kHz in 4-TDI. Mono 10 or Mono 12 is rated at 18.8 kHz across all three modes.

How is the 90 kHz MV-CL084-B1NM rate obtained with ROI?

The 90 kHz figure applies after ROI in Mono 8 and 1-Line mode when the active width is 3424 pixels or below. The separately listed peak rate for Mono 8 and 1-Line is 75.6 kHz.

Can the MV-CL084-B1NM link use slower Ethernet networks?

Yes. Its primary interface is 2.5 Gigabit Ethernet at 2500 Mbit/s, with explicit support for Gigabit Ethernet at 1000 Mbit/s and Fast Ethernet at 100 Mbit/s.

What I/O and supply arrangement is used by MV-CL084-B1NM?

The 12-pin P10 connection exposes four bidirectional configurable I/O lines with single-ended or differential signaling. Supply range is 12 VDC to 24 VDC and consumption is 6.7 W.

What are the mount and housing dimensions of MV-CL084-B1NM?

The camera has an M72 *0.75 mount with a 12 mm flange focal length. Its 76 mm × 76 mm × 41.9 mm housing weighs 350 g, is rated IP40 and works from –20 to 55 °C.

Typical applications