Area camera · CS Series
Hikrobot MV-CS050-10GC-PRO
- Lead time
- from 5 days
- Warranty
- 36 months
Sony IMX264 color inspection role
Sony® IMX264 color imaging defines this 5 MP GigE configuration. The 2/3-inch CMOS sensor uses a global shutter and 3.45 µm pixels to deliver 2448 × 2048 Bayer RG 8 frames at 24.2 fps. Its 72 dB dynamic range and two-part exposure control, from 1 µs UltraShort operation through 10 sec standard exposure, cover synchronized machine-vision capture over Ethernet.
Color feature checks, print registration and component-presence inspection can use the full 2448 × 2048 frame; 24.2 fps is the stated full-frame acquisition rate. Global exposure and the 1 µs lower limit address moving targets under short light pulses. A 6-pin P7 port provides isolated trigger input and output plus a bidirectional line, while PoE can place the camera away from a separate power feed.
MV-CS050-10GM-PRO matches the Sony® IMX264, resolution and 24.2 fps but supplies Mono 8 for intensity and edge work. MV-CS050-10UC retains the IMX264 color path and 2448 × 2048 frame, increasing the rate to 60 fps through USB3.0. MV-CS050-20GC V2.0 stays on Gigabit Ethernet and adds width at 2592 × 2048, with an OnSemi XGS5000 and a 22.7 fps ceiling.
Specifications
| Shutter | global |
| Sensor model | Sony® IMX264 |
| Nominal optical sensor format | 2/3″ |
| Sensor resolution | 2448×2048 px |
| Maximum frame rate | 24.2 fps @ resolution 2448×2048 px; 35.6 fps @ image compression, resolution 2448×2048 px |
| Color mode | color |
| Lens mount | C-mount |
| Data interface | GigE (Fast Ethernet compatible) |
| Sensor technology | CMOS |
| Pixel size | 3.45×3.45 µm |
| Dynamic range | 72 dB |
| Signal-to-noise ratio | 40 dB |
| Exposure time | 1…14 µs @ ultra-short exposure mode; 15…10000000 µs @ standard exposure mode |
| Auto exposure | Off, Once, Continuous |
| Gain | 0…24 dB |
| Pixel format | Mono8, Mono10, Mono12, BayerRG8, BayerRG10, BayerRG10p, BayerRG12, BayerRG12p, RGB8, BGR8, YUV422Packed, YUV422_YUYV_Packed |
| Binning | 1x1, 2x2, 4x4 |
| Decimation | 1x1, 2x2 |
| Protocol compatibility | GigE Vision, GenICam |
| Communication protocol versions | GigE Vision 2.0 |
| Third party software protocol | GigE Vision |
| Client software | MVS |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital I/O connector | Hirose 6-pin |
| Power supply | 9…24 V |
| Power delivery | external power supply, PoE |
| PoE support | yes |
| Power consumption | 2.9 W (typical) @ DC, supply voltage 12 V |
| Ingress protection | IP40 @ with lens and cables properly installed |
| Working temperature | -30…60 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 29×29×42 mm |
| Weight | 100 g (approx.) |
| Certification | CE, RoHS, KC |
| Reverse image | horizontal, vertical |
Selection and applications
Color feature inspection over GigE. Print and component registration checks. Short-exposure capture of moving targets.
Minimum kit: Use the MV-CS050-10GC-PRO camera, a C-mount lens covering 2/3 inch, a Gigabit Ethernet cable, and PoE or a 9 VDC to 24 VDC supply.
Nearby in the range: MV-CS050-10GM-PRO — Choose it for Mono 8 output from the same Sony® IMX264 at 24.2 fps; MV-CS050-10UC — Choose it for Sony® IMX264 color output at 60 fps over USB3.0; MV-CS050-20GC V2.0 — Choose it for a wider 2592 × 2048 color frame over Gigabit Ethernet.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- GigE
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
Which full-resolution output does MV-CS050-10GC-PRO produce?
The camera provides 2448 × 2048 Bayer RG 8 color frames at up to 24.2 fps. Its Sony® IMX264 is a 2/3-inch global-shutter CMOS sensor with 3.45 µm × 3.45 µm pixels and 72 dB dynamic range.
What exposure controls support motion work on MV-CS050-10GC-PRO?
UltraShort exposure spans 1 µs to 14 µs, and standard exposure covers 15 µs to 10 sec. The sensor uses a global shutter, so the complete frame shares the same exposure interval during triggered capture.
How can MV-CS050-10GC-PRO be powered on a GigE installation?
The camera supports PoE as well as a 9 VDC to 24 VDC input. Typical consumption is 2.9 W at 12 VDC. Data uses Gigabit Ethernet and the interface remains compatible with Fast Ethernet.
What optical mount and coverage are needed by MV-CS050-10GC-PRO?
Use a C-mount lens covering the 2/3-inch sensor format. It should resolve the 3.45 µm sampling of the 2448 × 2048 image; focal length is selected from the required scene width and working distance.
How does MV-CS050-10GC-PRO compare with the USB MV-CS050-10UC?
Both use the Sony® IMX264, a 2/3-inch global shutter and 2448 × 2048 Bayer RG 8 output. MV-CS050-10GC-PRO reaches 24.2 fps over Gigabit Ethernet, while MV-CS050-10UC reaches 60 fps over USB3.0.