Area camera · CS Series
Hikrobot MV-CS050-10UC
- Warranty
- 36 months
Local high-rate color acquisition
Full-resolution color capture reaches 60 fps on the Sony® IMX264 in MV-CS050-10UC. The 2/3-inch CMOS imager combines a global shutter, 3.45 µm pixels and 2448 × 2048 Bayer RG 8 output. USB3.0 carries the 5 MP stream to a nearby host, and the exposure system spans 1 µs UltraShort operation through 10 sec standard acquisition.
The 60 fps rate supports frequent sampling of moving assemblies for color classification, print alignment and component-state checks. Global exposure and the 1 µs minimum can limit motion displacement when illumination permits. The camera can take power through USB3.0, while a 6-pin P7 connector supplies an isolated trigger input, an isolated output and a bidirectional non-isolated control line.
MV-CS050-10GC-PRO uses the same Sony® IMX264, resolution and Bayer RG 8 format but sends 24.2 fps over Gigabit Ethernet with PoE. MV-CS050-60UC V5.0 matches the 60 fps USB rate while changing to a Stacked BSI sensor and adding high full well capacity and high sensitivity modes. MV-CS040-A0UC increases speed to 90.1 fps and uses a square 2048 × 2048 frame on a 1-inch sensor.
Specifications
| Product type | 5 MP USB 3.0 Area Scan Camera |
| Sensor type | CMOS, global shutter |
| Sensor model | Sony® IMX264 |
| Sensor format | 2/3″ |
| Resolution | 2448 × 2048 |
| Pixel size | 3.45 μm × 3.45 μm |
| Maximum frame rate | 60 fps @ 2448 × 2048 Bayer RG 8 |
| Mono color | Color |
| Dynamic range | 71 dB |
| Exposure time | UltraShort exposure mode: 1 μs to 14 μs Standard exposure mode: 15 μs to 10 sec |
| Gain | 0 dB to 24 dB |
| Data interface | USB3.0, compatible with USB2.0 |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Lens mount | C-mount |
| Power supply | 9 VDC to 24 VDC, supports USB3.0 power supply |
| Power consumption | Typ. 2.8 W @ 5 VDC (USB3.0 provides power supply) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Operating temperature | –30 °C to 60 °C (–22 °F to 140 °F) |
| Storage temperature | –30 °C to 70 °C (–22 °F to 158 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| Dimensions | 29 mm × 29 mm × 30 mm (1.1″ × 1.1″ × 1.2″) |
| Weight | Approx. 80 g (0.2 lb.) |
| Certification | CE-EMC, KC, UL |
| Compatibility | USB3 Vision, GenICam |
Selection and applications
High-rate color classification. Moving print alignment inspection. Triggered component-state verification.
Minimum kit: Use the MV-CS050-10UC camera, a C-mount lens for its 2/3-inch sensor, a USB3.0 cable, and USB3.0 bus power or a 9 VDC to 24 VDC source.
Nearby in the range: MV-CS050-10GC-PRO — Choose it for the same Sony® IMX264 color format over Gigabit Ethernet with PoE.; MV-CS050-60UC V5.0 — Choose it for 60 fps USB 3.0 color acquisition from a Stacked BSI sensor.; MV-CS040-A0UC — Choose it for a 2048 × 2048 color frame at 90.1 fps on a 1-inch sensor..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- USB 3.0
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What image rate is available from MV-CS050-10UC at 5 MP?
The maximum is 60 fps at 2448 × 2048 Bayer RG 8. The stream comes from a Sony® IMX264 2/3-inch global-shutter CMOS sensor with 3.45 µm × 3.45 µm pixels and 71 dB dynamic range.
How short is the MV-CS050-10UC exposure for moving targets?
UltraShort exposure covers 1 µs to 14 µs, followed by standard exposure from 15 µs to 10 sec. The global shutter exposes the full frame together, supporting motion capture under appropriately timed illumination.
Can MV-CS050-10UC run from the USB3.0 host connection?
Yes. USB3.0 can supply camera power, with typical consumption of 2.8 W at 5 VDC. A 9 VDC to 24 VDC supply is also accepted. The USB3.0 data interface is compatible with a USB2.0 connection.
What trigger connections are provided by the MV-CS050-10UC?
The 6-pin P7 connector carries one opto-isolated input, one opto-isolated output and one bidirectional non-isolated I/O. This gives a machine controller a hardware acquisition input and two options for coordinated signals.
How does MV-CS050-10UC differ from MV-CS050-10GC-PRO?
Both provide Sony® IMX264 color imaging at 2448 × 2048. MV-CS050-10UC reaches 60 fps over USB3.0 and can use USB power; MV-CS050-10GC-PRO reaches 24.2 fps over Gigabit Ethernet and supports PoE.