Area camera · CS Series
Hikrobot MV-CS050-60GC V2.0
- Warranty
- 36 months
Stacked BSI color over GigE
Stacked BSI color acquisition at 2448 × 2048 defines the V2.0 form of MV-CS050-60GC. The 2/3-inch global-shutter CMOS sensor uses 3.45 µm pixels and delivers Bayer GR 8 at 23 fps over Gigabit Ethernet. Exposure spans 5 µs to 10 sec, dynamic range is 73.9 dB, and the compact camera can receive power through PoE.
The combination addresses color presence, orientation and assembly checks on moving parts. Its stated full-frame rate is 23 fps at 2448 × 2048 Bayer GR 8. Global shutter timing and a 5 µs lower exposure limit support short, synchronized capture. The 6-pin P7 interface offers one isolated input, one isolated output and one bidirectional line, allowing acquisition and illumination to be tied to external machine timing.
MV-CS050-60GM V2.0 is the Mono 8 counterpart with the same 23 fps limit and Stacked BSI sensor. MV-CS050-60GC V5.0 increases the GigE color rate to 24.4 fps, lowers typical consumption from 2.5 W to 1.4 W at 12 VDC, and adds high full well capacity plus high sensitivity modes. For 60 fps at the same resolution, MV-CS050-60UC V2.0 changes the connection to USB3.0.
Specifications
| Product type | 5 MP GigE Area Scan Camera |
| Sensor type | CMOS, global shutter |
| Sensor model | Stacked BSI |
| Sensor format | 2/3″ |
| Resolution | 2448 × 2048 |
| Pixel size | 3.45 μm × 3.45 μm |
| Maximum frame rate | 23 fps @2448 × 2048 Bayer GR 8 |
| Mono color | Color |
| Dynamic range | 73.9 dB |
| Exposure time | 5 μs to 10 sec |
| Gain | 0 dB to 24 dB |
| Data interface | Gigabit Ethernet, compatible with Fast Ethernet |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Lens mount | C-mount |
| Power supply | 9 VDC to 24 VDC, supports PoE |
| Power consumption | Typ. 2.5 W @ 12 VDC |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Operating temperature | -30 °C to 60 °C (-22 °F to 140 °F) |
| Storage temperature | -30 °C to 70 °C (-22 °F to 158 °F) |
| Humidity | 20% to 95% RH, non-condensing |
| Dimensions | 29 mm × 29 mm × 42 mm (1.1″ × 1.1″ × 1.7″) |
| Weight | Approx. 100 g (0.2 lb.) |
| Certification | CE-EMC, KC, UL |
| Compatibility | GigE Vision V2.0, GenICam |
Selection and applications
GigE color presence inspection. Moving assembly orientation checks. PoE-triggered image acquisition.
Minimum kit: Use the MV-CS050-60GC V2.0 camera, a C-mount lens covering 2/3 inch, a Gigabit Ethernet cable, and PoE or a 9 VDC to 24 VDC supply.
Nearby in the range: MV-CS050-60GM V2.0 — Choose it for Mono 8 output at the same 2448 × 2048 resolution and 23 fps.; MV-CS050-60GC V5.0 — Choose it for 24.4 fps color capture and high full well capacity or high sensitivity operation.; MV-CS050-60UC V2.0 — Choose it for Stacked BSI color output at 60 fps over USB3.0..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- GigE
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What is the full-frame color rate of MV-CS050-60GC V2.0?
The camera reaches 23 fps at 2448 × 2048 Bayer GR 8. Its Stacked BSI CMOS sensor is a 2/3-inch global-shutter device with 3.45 µm × 3.45 µm pixels and 73.9 dB dynamic range.
How does exposure operate on the MV-CS050-60GC V2.0?
Exposure can be set from 5 µs to 10 sec. Because the sensor uses a global shutter, that interval applies across the whole frame, which supports synchronized capture of moving parts under controlled illumination.
What cabling and power does MV-CS050-60GC V2.0 need?
Images travel through Gigabit Ethernet, with Fast Ethernet also supported. The camera accepts PoE or 9 VDC to 24 VDC input, and typical consumption is 2.5 W at 12 VDC.
Which ambient conditions are specified for MV-CS050-60GC V2.0?
The working range is -30 °C to 60 °C, storage is -30 °C to 70 °C, and humidity is 20% to 95% RH without condensation. IP40 applies when the lens and wiring are installed correctly.
What does V5.0 change relative to MV-CS050-60GC V2.0?
MV-CS050-60GC V5.0 raises full-frame color speed from 23 fps to 24.4 fps. It specifies 1.4 W typical use at 12 VDC instead of 2.5 W and provides high full well capacity and high sensitivity settings.