Area camera · CS Series
Hikrobot MV-CS050-60GC V5.0
- Lead time
- from 5 days
- Warranty
- 36 months
Dual-mode color camera positioning
High full well capacity and high sensitivity operation distinguish MV-CS050-60GC V5.0 within the 5 MP GigE set. Its 2/3-inch Stacked BSI global-shutter sensor outputs 2448 × 2048 Bayer GR 8 at 24.4 fps. The camera combines 73.9 dB dynamic range with separate exposure and gain ranges for the two modes, then transports images over 1000 Mbit/s Ethernet.
Color presence and assembly-state inspections can select the sensor mode to match the illumination condition. High full well capacity uses exposure from 45 µs to 10 sec and gain to 12.8 dB; high sensitivity starts at 5 µs and extends gain to 24 dB. A global shutter supports moving parts, and the isolated input and output lines allow capture and lighting to follow machine timing.
MV-CS050-60GC V2.0 provides the same resolution and Stacked BSI color output at 23 fps, without the two listed sensor modes, and consumes 2.5 W rather than 1.4 W at 12 VDC. MV-CS050-60GM V5.0 mirrors the V5.0 modes and 24.4 fps rate in Mono 8. MV-CS050-60UC V5.0 retains color and the dual modes while moving to USB 3.0 and 60 fps.
Specifications
| Shutter | global |
| Nominal optical sensor format | 2/3″ |
| Sensor resolution | 2448×2048 px |
| Maximum frame rate | 24.4 fps @ BayerGR8, resolution 2448×2048 px |
| Color mode | color |
| Lens mount | C-mount |
| Data interface | GigE (Fast Ethernet compatible) |
| Sensor technology | CMOS; stacked BSI |
| Pixel size | 3.45×3.45 µm |
| Dynamic range | 73.9 dB |
| Signal-to-noise ratio | 42.4 dB |
| Exposure time | 45…10000000 µs @ high full well capacity; 5…10000000 µs @ high sensitivity |
| Auto exposure | Auto, Off, Once |
| Gain | 0…12.8 dB @ high full well capacity; 0…24 dB @ high sensitivity |
| Pixel format | Mono8, BayerGR8, BayerGR10, BayerGR10Packed, BayerGR12, BayerGR12Packed, YUV422Packed, YUV422_YUYV_Packed, RGB8, BGR8 |
| Binning | 1x1, 2x2, 4x4 |
| Decimation | 1x1, 2x2, 4x4 |
| Protocol compatibility | GigE Vision, GenICam |
| Communication protocol versions | GigE Vision 2.0 |
| Third party software protocol | GigE Vision |
| Client software | MVS, third-party GigE Vision software |
| Operating systems | Windows 7 (32/64-bit), Windows 10 (32/64-bit), Windows 11 (64-bit), Linux (32/64-bit) |
| Digital I/O lines | 1 input, opto-isolated, line 0; 1 output, opto-isolated, line 1; 1 bidirectional line, non-isolated, line 2 |
| Digital input count | 1 |
| Digital output count | 1 |
| Digital I/O connector | P7 6-pin |
| Power supply | 9…24 V |
| Power delivery | external power supply, PoE |
| PoE support | yes |
| Power consumption | 1.4 W (typical) @ DC, supply voltage 12 V |
| Ingress protection | IP40 @ with lens and cables properly installed |
| Working temperature | -30…60 °C |
| Storage temperature | -30…80 °C |
| Humidity | 20…95 % @ non-condensing |
| Dimensions | 29×29×42 mm |
| Weight | 100 g (approx.) |
| Certification | CE, RoHS, KC |
| Reverse image | horizontal, vertical |
Documents
Selection and applications
Dual-mode color presence inspection. Timed capture under changing illumination. Low-consumption PoE inspection nodes.
Minimum kit: Use the MV-CS050-60GC V5.0 camera, a C-mount lens for the 2/3-inch sensor, a Gigabit Ethernet cable, and PoE or a 9 VDC to 24 VDC source.
Nearby in the range: MV-CS050-60GC V2.0 — Choose it for 23 fps Stacked BSI color output with a 5 µs to 10 sec exposure range; MV-CS050-60GM V5.0 — Choose it for Mono 8 output with the same two modes and 24.4 fps rate; MV-CS050-60UC V5.0 — Choose it for dual-mode Stacked BSI color imaging at 60 fps over USB 3.0.
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- GigE
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
Which sensor modes are available on MV-CS050-60GC V5.0?
The camera provides high full well capacity and high sensitivity operation. Both use the 2/3-inch Stacked BSI global-shutter sensor, with 2448 × 2048 Bayer GR 8 output at up to 24.4 fps.
How do the MV-CS050-60GC V5.0 exposure ranges differ by mode?
High full well capacity exposure spans 45 µs to 10 sec, while high sensitivity spans 5 µs to 10 sec. Their gain ceilings are 12.8 dB and 24 dB respectively, both beginning at 0 dB.
Can MV-CS050-60GC V5.0 use PoE on a 1000 Mbit/s link?
Yes. The camera supports PoE and also accepts 9 VDC to 24 VDC. Typical consumption is 1.4 W at 12 VDC. Ethernet runs at 1000 Mbit/s and can also connect at 100 Mbit/s.
What lens and enclosure details matter for MV-CS050-60GC V5.0?
The camera has a C-mount for a lens covering the 2/3-inch sensor. Its body is 29 mm × 29 mm × 42 mm and about 100 g. IP40 applies with correct lens installation and completed wiring.
Why select MV-CS050-60GC V5.0 instead of the V2.0 model?
V5.0 reaches 24.4 fps rather than 23 fps, lists two sensor operating modes and uses 1.4 W typically at 12 VDC rather than 2.5 W. Both provide 2448 × 2048 Stacked BSI color output over Gigabit Ethernet.