Area camera · CS Series
Hikrobot MV-CS050-60UM V5.0
- Warranty
- 36 months
Dual-mode 60 fps mono capture
A dual-mode Stacked BSI sensor supplies 2448 × 2048 Mono 8 at 60 fps in MV-CS050-60UM V5.0. The 2/3-inch CMOS imager uses 3.45 µm pixels, a global shutter and 73.9 dB dynamic range. High full well capacity and high sensitivity settings extend the lighting choices, and USB 3.0 carries both image data and, when used for power, the camera supply.
Fast grayscale inspection can use high full well capacity for edge and dimensional work under stronger illumination or high sensitivity when more gain is needed. The respective exposure floors are 30 µs and 5 µs, and both extend to 10 sec. Global capture plus an opto-isolated trigger input supports moving parts, with a 29 mm × 29 mm × 30 mm housing for close placement.
MV-CS050-60UM V2.0 matches 60 fps and resolution but has one exposure range and uses 1.7 W typically at 5 VDC rather than 1.5 W. MV-CS050-60UC V5.0 changes the data to Bayer GR 8 color while retaining the dual modes and rate. MV-CS050-80UM V5.0 adopts an SS sensor and increases full-frame speed to 80 fps, with exposure starting at 15 µs.
Specifications
| Product type | 5 MP USB 3.0 Area Scan Camera |
| Sensor type | CMOS, global shutter |
| Sensor model | Stacked BSI |
| Sensor format | 2/3″ |
| Resolution | 2448 × 2048 |
| Pixel size | 3.45 μm × 3.45 μm |
| Maximum frame rate | 60 fps @ 2448 × 2048 Mono 8 |
| Mono color | Mono |
| Dynamic range | 73.9 dB |
| Exposure time | High full well capacity: 30 μs to 10 sec High sensitivity: 5 μs to 10 sec |
| Gain | High full well capacity: 0 dB to 12.8 dB High sensitivity: 0 dB to 24 dB |
| Data interface | USB 3.0, compatible with USB 2.0 |
| Digital I/O | 6-pin P7 connector provides power and I/O, including opto -isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2). |
| Lens mount | C-mount |
| Power supply | 9 VDC to 24 VDC, supports USB 3.0 power supply |
| Power consumption | Typ. 1.5 W @ 5 VDC (USB 3.0 provides power supply) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Operating temperature | –30 °C to 60 °C (–22 °F to 140 °F) |
| Storage temperature | –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 20% RH to 95% RH (no condensation) |
| Dimensions | 29 mm × 29 mm × 30 mm (1.1″ × 1.1″ × 1.2″) |
| Weight | Approx. 80 g (0.2 lb.) |
| Certification | CE-EMC, KC, UL |
| Compatibility | USB3 Vision, GenICam |
Selection and applications
Dual-mode grayscale inspection. Fast dimensional measurement. Triggered mono capture under changing light.
Minimum kit: Use the MV-CS050-60UM V5.0 camera, a C-mount lens for the 2/3-inch imager, a USB 3.0 cable, and USB 3.0 bus power or a 9 VDC to 24 VDC source.
Nearby in the range: MV-CS050-60UM V2.0 — Choose it for 60 fps mono capture with a single 5 µs to 10 sec exposure range.; MV-CS050-60UC V5.0 — Choose it for Bayer GR 8 color using the same dual modes and 60 fps rate.; MV-CS050-80UM V5.0 — Choose it for 2448 × 2048 Mono 8 from an SS sensor at 80 fps..
Cables and accessories for this model
Compatibility per manufacturer data.
- Data cables
- USB 3.0
- I/O & power cables
- Hirose 6-pin IO
- Power
- Power
- Mounting
- Camera mounts
FAQ
What frame format does MV-CS050-60UM V5.0 sustain at 60 fps?
It sustains a 2448 × 2048 Mono 8 frame. The 2/3-inch Stacked BSI CMOS imager has a global shutter, 3.45 µm × 3.45 µm pixels and 73.9 dB dynamic range.
How are the MV-CS050-60UM V5.0 operating modes configured?
High full well capacity spans 30 µs to 10 sec with gain from 0 dB to 12.8 dB. High sensitivity spans 5 µs to 10 sec and permits 0 dB to 24 dB gain on the Stacked BSI sensor.
What powers MV-CS050-60UM V5.0 during USB acquisition?
USB 3.0 power can supply the camera, whose typical consumption is 1.5 W at 5 VDC. The alternate input is 9 VDC to 24 VDC. USB 2.0 connection is also supported by the data interface.
What trigger resources are built into MV-CS050-60UM V5.0?
The 6-pin P7 port includes one opto-isolated input, one opto-isolated output and one bidirectional non-isolated I/O. These lines connect acquisition and auxiliary timing to the machine sequence.
How does MV-CS050-80UM V5.0 change the mono operating point?
The 80UM raises full-frame speed from 60 fps to 80 fps and replaces the Stacked BSI sensor with an SS sensor. It keeps 2448 × 2048 Mono 8, a 2/3-inch global shutter and USB 3.0.