Hikrobot MV-CT0CG0060/R

BASE version: what you get

Same sensor, other versions:

Same version, other sensor variant:

Engineering fit in the CT range

Fine-pixel colour imaging for indexed scenes distinguishes this rolling-shutter version. At its centre, MV-CT0CG0060/R records 3072 × 2048 px colour frames at up to 19.5 fps. The Sony IMX178 CMOS device has 2.4 × 2.4 µm pixels on a 1/1.8-inch format and uses a rolling shutter. Transport is Gigabit Ethernet through the RJ45 connector.

The rolling shutter directs MV-CT0CG0060/R toward indexed-part colour inspection, stationary surface review and dense feature capture, where motion during sensor readout can be controlled. Exposure extends through 25 µs to 3.1 s. Rolling and Global Reset modes add two readout choices. The 29 mm × 29 mm × 42 mm (1.1" × 1.1" × 1.7") body accepts C-mount optics. IP40 protection applies with proper lens installation and wiring, and the working range is –30 °C to 60 °C (–22 °F to 140 °F).

Neighbouring cameras show where this combination should be retained. MV-CT0MG0060/R keeps 3072 × 2048 px and 19.5 fps but changes the output to Mono. MV-CT0CU0060/R uses USB 3.0 for 3072 × 2048 px colour capture at 60.9 fps. MV-CT0CG0050/G provides 2448 × 2048 px at 24.5 fps with a global-shutter colour path over Gigabit Ethernet. Retain MV-CT0CG0060/R when Color output, Gigabit Ethernet and PoE are needed together at 19.5 fps.

Documents

Selection and applications

Colour feature capture at 3072 × 2048 px. Stationary colour inspection with a rolling shutter. Full-frame acquisition up to 19.5 fps.

Minimum kit: Use MV-CT0CG0060/R with a C-mount lens, a Gigabit Ethernet cable to the RJ45 connector, and either PoE or 9 V DC to 24 V DC power through the 8-pin M8 A-Code connection.

Nearby in the range: MV-CT0MG0060/R — Prefer it for Mono output at the same 3072 × 2048 px and 19.5 fps; MV-CT0CU0060/R — Prefer it for USB 3.0 transport at 3072 × 2048 px and 60.9 fps; MV-CT0CG0050/G — Prefer it for 2448 × 2048 px, 24.5 fps and global-shutter colour capture.

Compatible lens options

• MVL-KF1628M-12MP — C-mount mount; Ø17.6 mm image circle fully covers the 1/1.8″ sensor; 12 MP optical class — headroom for this camera
• MVL-KF5024M-25MP — C-mount mount; Ø19.3 mm image circle fully covers the 1/1.8″ sensor; 25 MP optical class — headroom for this camera

Cables and accessories for this model

Compatibility per manufacturer data.

Data cables

GigE

I/O & power cables

CT: power and I/O

Power

Power

Mounting

Camera mounts

All accessory families →

FAQ

Which suggested lenses cover the sensor in MV-CT0CG0060/R?

For MV-CT0CG0060/R, the C-mount matches are MVL-KF1628M-12MP and MVL-KF5024M-25MP. Their image circles cover the 1/1.8-inch sensor, and the 12 MP and 25 MP lens classes are above the camera’s 3072 × 2048 px matrix. Both therefore match the stated mount, sensor coverage and resolution requirement.

How should power and cabling be arranged for MV-CT0CG0060/R?

The camera accepts 9 V DC to 24 V DC and also supports PoE. The RJ45 connector carries Gigabit Ethernet; the 8-pin M8 A-Code connection provides DC power and I/O when separate power is used. Consumption is typically 1.5 W at 12 V DC.

What data interface and peak acquisition rate does MV-CT0CG0060/R provide?

Data uses Gigabit Ethernet at 1 Gbit/s through RJ45 and remains compatible with Fast Ethernet. The stated full-frame ceiling is 19.5 fps at 3072 × 2048 Bayer RG 8. MVS and software meeting the GigE Vision protocol are supported.

How do shutter timing and exposure affect motion work with MV-CT0CG0060/R?

This is a rolling-shutter CMOS camera, so stationary or strobed scenes suit geometry-sensitive work. It reaches 19.5 fps, with exposure from 25 µs to 3.1 s. Rolling and Global Reset are supported. Exposure operation includes Off, Once and Continuous.

Which image-reduction and I/O functions are available on MV-CT0CG0060/R?

Binning and decimation each support 1 × 1, 2 × 2 and 4 × 4 operation. Horizontal and vertical reverse-image output is available. The 8-pin M8 A-Code I/O provides one opto-isolated input, one opto-isolated output and one bidirectional non-isolated line for sequencing.

What enclosure conditions and temperature range apply to MV-CT0CG0060/R?

Operation is rated from –30 °C to 60 °C (–22 °F to 140 °F), with 20% RH to 95% RH (no condensation). The housing is 29 mm × 29 mm × 42 mm (1.1" × 1.1" × 1.7") and weighs approximately 116 g (0.3 lb.). Its IP40 rating applies under proper lens installation and wiring, so the station must provide conditions consistent with that protection level.